6112: Tool Design KL Diploma Syllabus for Tool & Die 6th Sem 2015 Revision SITTTR

Tool Design detailed syllabus for Tool & Die Engineering (Tool & Die) for 2015 revision curriculum has been taken from the SITTTRs official website and presented for the Tool & Die students. For course code, course name, number of credits for a course and other scheme related information, do visit full semester subjects post given below.

For Tool & Die Engineering 6th Sem scheme and its subjects, do visit Tool & Die 6th Sem 2015 revision scheme. The detailed syllabus of tool design is as follows.

Course Outcomes:

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

SPECIFIC OUTCOMES

MODULE-I

1. Understand design different types of guide plate tools
   1. List the type of guide plate tools.
   2. Explain the method of designing single guide plate tool.
   3. Design a progressive guide plate tool.
2. Know the design of blanking tool with die set
   1. State the die set materials.
   2. Identity the die set components.
   3. Draw blanking tool by using standard die set.
3. Analyze design of Fine blanking die
   1. Define fine blanking.
   2. Describe the elements of fine blanking tool.
   3. Design fine blanking tool.

MODULE-II

1. Understand design of progressive tool
   1. Draw single stage progressive tool incorporating fixed stop.
   2. Design multi stage progressive tool by incorporating travelling Stripper and fixed stop.
   3. Draw multi stage progressive tools with cut off punches and Parting off punches.
   4. Design multi stage progressive tool incorporating side cutter and stock lifters. MODULE-III
2. Analyze the design of compound tool
   1. Draw the design of compound tool with direct knockout.
   2. Design a compound tool with indirect knockout.
3. Understand different types of bending tool design
   1. State the design principle of V’ bending tool.
   2. Design U’ bending tool.
   3. Identify L’ bending tool.
   4. List the steps of designing curling tool and forming tool.
4. Analyze the design aspects of drawing tool
   1. Justify the design of deep draw tool.
   2. Design inverted draw tool.
   3. Derive the equation to find the blank holding force calculation.

MODULE-IV

1. Understand design of injection mould
   1. State the hand injection mould designing with single cavity ejection mould.
   2. Draw and design multi cavity injection mould.
   3. Design injection mould with two plate mould.
   4. Identify the design of injection mould by incorporating different Injection moulds.
   5. Design of injection mould by incorporating different feed arrangements.
2. Know compression mould design
   1. Design of compression mould showing horizontal flash.
   2. Design of compression mould showing vertical flash.
   3. Draw a pot transfer mould with proportions.
   4. List the factors governing the design of a plunger transfer mould.
3. Apply the design aspects of die casting dies
   1. Explain with sketches the design of cold chamber die casting dies.
   2. Describe with the help of sketches, the design aspects of hot chamber die casting system.

MODULE-I

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

MODULE – II

Design of Progressive Tools, Single stage incorporating fixed stop, Multi stage incorporating one or more of the following fixtures:- Travelling stripper, Cut off punches, parting of punches, Side cutter, Stock lifters&, fixed stop.

MODULE- III

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

MODULE- IV

Design of Injection moulds, Hand injection moulds – single cavity injection mould, multi cavity injection mould., Two plate injection mould, Design of moulds incorporating different type of ejection – different types of feed arrangements. Design of Compression moulds: – For component showing Horizontal flash, For component showing vertical flash .Design of Transfer mould:- Pot transfer mould – plunger transfer mould. Design of die-casting dies: For cold chamber system – for hot chamber system.

Reference Books:

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

For detailed syllabus of all other subjects of Tool & Die Engineering, 2015 revision curriculum do visit Tool & Die 6th Sem subject syllabuses for 2015 revision.

To see the syllabus of all other branches of diploma 2015 revision curriculum do visit all branches of SITTTR diploma 2015 revision.