4123: Wood Products I KL Diploma Syllabus for Wood & Paper 4th Sem 2015 Revision SITTTR

Wood Products I detailed syllabus for Wood & Paper Technology (Wood & Paper) for 2015 revision curriculum has been taken from the SITTTRs official website and presented for the Wood & Paper students. For course code, course name, number of credits for a course and other scheme related information, do visit full semester subjects post given below.

For Wood & Paper Technology 4th Sem scheme and its subjects, do visit Wood & Paper 4th Sem 2015 revision scheme. The detailed syllabus of wood products i is as follows.

Course Outcomes:

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

SPECEFIC OUTCOME

Module I

1. understand Manufacture Of Veneer in Plywood industry
   1. Define the plywood, veneer, flitches, peeling, slicing and drying
   2. Describe the advantage of plywood over solid wood
   3. Explain the history of plywood manufacture
   4. Describe the factors considering in the selection of logs and its storage and transport
   5. State the end coating and end protection devices
   6. Describe about softening treatment of logs prior to boiling and slicing
   7. Explain the flitches and their preparation
   8. Illustrate tangential and radial cutting
   9. Explain the veneer slicing and methods
   10. Illustrate vertical slicing machine
   11. Explain the rotary peeling
   12. Describe the nose bar, knife arrangement on peeling lathe
   13. Illustrate schematic diagram of log with respect to knife and nose bar
2. Understand Processing of Veneer
   1. Describe handling of veneers and clipping
   2. Describe advantage of veneer drying
   3. Explain Jet dryer, roller dryer, band dryer, breather and Kiln dryer
   4. Explain above dryers with the help of neat sketches
   5. Understand the processing of veneers
   6. Explain storage and handling of veneers from peeling
   7. Explain joining and splicing machine cross feed splicer

Module II

1. Understand Jointing and Matching of Veneer
   1. State repair of veneers
   2. Describe picus joint, scarf joint, Ibus joint
   3. Describe veneer matching
   4. Illustrate , four piece matching, book matching side to side matching, end to end matching cathedral matching
2. Understand Gluing and Pressing of Veneer
   1. Define adhesive, adhesion, adherent
   2. Define glues
   3. Describe glue mixing
   4. Describe roller spreading with diagram, brushing, spraying.
   5. State the factors affecting wood to wood glue joint such as temperature, moisture content.
   6. Describe pre pressing and its advantages.
   7. Explain cold press
   8. Explain hot press
   9. Estimate gauge pressure
   10. State the need of conditioning
   11. Describe hot press gluing faults such as blister, bleed through, warp age, starved joint, spotty bond, weak bond face checking, overlaps and core gaps
   12. Explain the dimensioning and sanding of plywood
3. Understand Dimensioning and Finishing of Plywood
   1. State the sanding and dimensioning
   2. Describe trimming State standard plywood specifications
   3. Describe drum sander, belt sander, wide belt sander
   4. State abrasive materials

Module III

1. Comprehend Grading of Plywood
   1. State the grading of general purpose plywood
   2. Describe the grading with respect to quality office veneers Describe the grading with respect to adhesive used
2. Understand the Testing and Properties of Plywood
   1. State speciality plywood
   2. List speciality plywood.
   3. Describe the tea chest plywood, marine plywood shuttering plywood, fireproof plywood, aircraft plywood, preservative treated plywood metal faced and moulded plywood
   4. State the grading of specialty plywood by using relevant is codes

Module IV

1. Understand Solid Wood Bending
   1. Define Bending
   2. Explain General Consideration in bending
   3. Explain steaming
   4. Explain cold bending and Hot Bending
   5. Explain simple U’ bend with figure
   6. Explain Re entrant and S’ type bend with figure
   7. Explain end stops
   8. Explain chair leg bending
2. Understand Machine Bending
   1. State Machine Bending
   2. Explain Machine bending
   3. Explain Rope and windless Machine with figure
   4. Explain Lever arm Machine with figure
   5. Explain Revolving Table Machine
   6. Explain setting technique
   7. Explain Movement of Bends
3. understand Laminated Wood Bending
   1. Define laminated bending
   2. Explain selection and Preparation of laminates
   3. Define Pre bending
   4. Explain laminated wood bending by male & female forms
   5. Explain split female forms, by inflated flexible hose
   6. Explain two plane bends

Module I

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module II

Jointing machine, taping, splicing machine, end jointing, scarf joint, Ibus joint, repair of veneers. Matching of veneers – four piece matching, book matching, side to side matching, end to end matching, cathedral matching – veneer sorting Define – adhesive, adhesion, adherent, classification of glues with their chemical composition glue mixing list of additives used in mixing, methods of glue spreading – roller spreading, brushing, spraying. Assembling of glued veneers Pre – pressing advantages and disadvantages factors which affect the adhesion on wood to wood glue joint – moisture content – glue spread – temperature – pressure -surface porosity. Cold pressing and hot pressing. Calculation of gauge pressure. Conditioning of plywood. Hot press gluing faults – blister – bleed through – – warp age – starved joint – spotty bond -weak bondface checking – overlaps and gaps Trimming sanding – drum sander – belt sander – wide belt sander –

Module III

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Module IV

Solid Bending- General Considerations- Chemical treatment- Selection of Species- softening treatmentTreating Methods- Bending in Cold State- Hot bending- Simple U’ Bending – Re entrant and S’ type bend- chair leg bends- Transverse bending – Built up bends Machine bending- Rope and windless machine- Lever arm Machine- Revolving Table Machine- Presses- Setting techniques – Movement of bends Laminated Wood Bending Laminated bending- General Consideration- Advantages-Disadvantages- selection and preparation of laminates – Pre bending- Pressing laminates in to shapeGeneral Considerations- Male & Female forms, Split female forms- pre bend- pressing laminations by shape by Inflated flexible hose – Continuous strip Method- Two plane bends– Curved laminated Members- Movement and distortion of laminated bends- Plywood bending

Reference Books:

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

For detailed syllabus of all other subjects of Wood & Paper Technology, 2015 revision curriculum do visit Wood & Paper 4th Sem subject syllabuses for 2015 revision.

To see the syllabus of all other branches of diploma 2015 revision curriculum do visit all branches of SITTTR diploma 2015 revision.