Digital Design and Computer Architecture Lab detailed syllabus for Robotics Process Automation (RP) for 2021 revision curriculum has been taken from the SITTTRs official website and presented for the Robotics Process Automation students. For course code, course name, number of credits for a course and other scheme related information, do visit full semester subjects post given below.
For Robotics Process Automation 3rd Sem scheme and its subjects, do visit Robotics Process Automation (RP) 3rd Sem 2021 revision scheme. The detailed syllabus of digital design and computer architecture lab is as follows.
Course Objectives:
- To study the working of standard digital ICs and basic building blocks
- To design and implement combinational circuits
- To design and implement sequential circuits
Course Outcomes:
On completion of the course, the student will be able to:
- Demonstrate functioning of various combination circuits 1
- Demonstrate functioning of various sequential circuits 1
- To identify System Layout
- To install and configure DVD writer and printer
Module 1:
- Familiarization of Logic ICs for AND, OR, NOT, NAND, NOR and XOR by verification of truthtables and implementation of basic gates using Universal Gates (NAND & NOR)
- Half and full adder circuits
- Half and full subtractor circuits
- 4: 1 MUX and 1 : 4 Demux using NAND Gates
Module 2:
- SR, J K ,D, and T Flip flops using NAND gate
- Asynchronous mod-10 and mod 12 counter using flip-flops
- Synchronous mod-10 counter using flip-flops
Module 3:
- a) Front panel indicators & switches and Front side & rear side connectors. b) Familiarize the computer system Layout:Marking positions of SMPS, Motherboard, FDD, HDD, CD, DVD and add on cards. c) Configure BIOS setup program and troubleshoot the typical problems using BIOS utility.
- a) Install Hard Disk.b) Configure CMOS-Setup. c) Partition and Format Hard Disk. d) Identify Master /Slave / IDE Devices. e) Practice with scan disk, disk cleanup, disk De-fragmenter, Virus Detecting and Rectifying Software.
Module 4:
- a) Install and Configure a DVD Writer and a Blu-ray Disc writer. b) Recording a Blank DVD and Blu-ray Disc.
- Printer Installation and Servicing: a) Head Cleaning in dot matrix printer b) Install and configure Dot matrix printer and Laser printer c) Troubleshoot the above printers. d) Check and connect the data cable connectivity
Text Books:
- Electronics Lab manual Volume I, K. A. Navas ,
Online Resources
- https://de-iitr.vlabs.ac.in/
- http://vlabs.iitb.ac.in/vlabs-dev/labs/digital-electronics/
Suggested Open Ended Projects
(Students have to do open ended experiments during the course for the purpose of continuous evaluation. This experiment shall be included in the bona-fide record.)
For detailed syllabus of all other subjects of Robotics Process Automation (RP), 2021 revision curriculum do visit Robotics Process Automation 3rd Sem subject syllabuses for 2021 revision.
To see the syllabus of all other branches of diploma 2021 revision curriculum do visit SITTTR diploma all branches syllabus..
To see the results of Robotics Process Automation (RP) of diploma 2021 revision curriculum do visit SITTTR diploma Robotics Process Automation (RP) results..
For all Robotics Process Automation academic calendars, visit Robotics Process Automation all semesters academic calendar direct link.