Tool Engineering Lab detailed syllabus for Tool & Die Engineering (TD) for 2021 revision curriculum has been taken from the SITTTRs official website and presented for the Tool & Die Engineering students. For course code, course name, number of credits for a course and other scheme related information, do visit full semester subjects post given below.
For Tool & Die Engineering 3rd Sem scheme and its subjects, do visit Tool & Die Engineering (TD) 3rd Sem 2021 revision scheme. The detailed syllabus of tool engineering lab is as follows.
Course Objectives:
- To introduce basic engineering processes for manufacturing and assembly.
- To familiarize students with the identification, selection & use of various marking, measuring, holding, striking, and cutting tools and equipment’s.
- To provide knowledge to interpret job drawings, produce jobs, and inspect the job for specified dimensions.
- To impart skill to operate and control different machines by adopting safety practices.
Course Outcomes:
On completion of the course, the student will be able to:
- Produce skills in basic bench working practice to identify, select and use various marking, measuring, holding, striking and cutting tools, equipment’s & machines.
- Demonstrate drilling and reaming operation.
- Demonstrate the operation of tap & Die set.
- Practice various operations on tool room lathe and pedestal grinding machine.
Module 1:
- Practice Filing of flat surfaces and right angles with try square accuracy.
- Practice filing of flat and parallel surfaces within +/- 0.5mm accuracy along with marking, punching, hack sawing and chamfering at 450
- Practice filing & finishing of angles within +/- 10 and checking angles using bevel gauges.
- Practice filing of external radius and marking with radius gauge.
Module 2:
- Illustrate drilling machine, drilling through holes, chain drilling and parting off, drilling blind holes.
- Demonstrate radial drilling machine operations.
- Perform counter boring and counter sinking operation.
- Practice reaming with hand reamers
Module 3:
M3.01. Explain the tap hole size calculation
M3.02. Perform tap and die operation on different Metric threads.
Module 4:
- Identify various operations on tool room lathe and pedestal grinding machine.
- Practice grinding of single point cutting tools to required angle using pedestal grinding machine.
- Practice various turning Exercises (i) Facing, Step Turning & Chamfering (ii) Step Turning & Taper Turning (iii) Step Turning & Groove Cutting (iv) Step Turning && Knurling (v) Step Turning & Thread Cutting (vi) Turning and Drilling. 1
Text Books:
- Mechanical Workshop Practice by K. C Jon, PHI Learning Private Limited
Reference Books:
- Mechanical Workshop & Laboratory Manual by K. C. John
- Workshop Technology Vol. I by S K HajraChoudhary
- Workshop Technology Vol. II by S K HajraChoudhary
Online Resources
- http://ecoursesonline.iasri.res.in/mod/page/view.php?id=98833
- https://www.profitfromtraining.org.uk/material__fabrication tools_and_measurin g_workbook.pdf
- http://www.survivorlibrary.com/library/machine_tools_and_workshop_practice_19 05.pdf
- https://www.engineeringbookspdf.com/mechanical-engineering/workshop-practice/
- https://www.agrimoon.com/wp-content/uploads/WORKSHOP-PRACTICE.pdf
For detailed syllabus of all other subjects of Tool & Die Engineering (TD), 2021 revision curriculum do visit Tool & Die Engineering 3rd Sem subject syllabuses for 2021 revision.
To see the syllabus of all other branches of diploma 2021 revision curriculum do visit SITTTR diploma all branches syllabus..
To see the results of Tool & Die Engineering (TD) of diploma 2021 revision curriculum do visit SITTTR diploma Tool & Die Engineering (TD) results..
For all Tool & Die Engineering academic calendars, visit Tool & Die Engineering all semesters academic calendar direct link.