Engineering Metrology detailed syllabus for Tool & Die Engineering (Tool & Die) for the 2015 revision curriculum has been taken from the SITTTRs official website and presented to the Tool & Die students. For course code, course name, number of credits for a course, and other scheme-related information visit the full semester subjects post below.
For the Tool & Die Engineering 3rd Sem scheme and its subjects, visit the Tool & Die 3rd Sem 2015 revision scheme. The detailed syllabus of engineering metrology is as follows.
Course Outcomes:
For the complete syllabus, results, class timetable, and many other features, kindly download the iStudy App
It is lightweight and easy to use, with no images and no PDFS platform to make students’s lives easier.
SPECIFIC OUTCOMES
MODULE- I
- Understand the Importance and aim of Metrology and Measurement Techniques
- Describe basic principles of measurement
- Define measurement
- Identify methods of measurements
- Distinguish between direct comparison and indirect comparison
- Define range, sensitivity, true value, indicate value, error, correction, accuracy, precision.
- Know Linear measurement methods
- Identify non-precision measurement
- Describe various parts and methods of measuring with, surface plate, tool maker’s flats, high precision surface plate, glass surface plate and angle plate
- Describe various parts and methods of measuring with V block, straight edge, spirit level, combination set, universal surface gauge, and feeler gauge.
- List the characteristics of precision measuring instruments.
- Illustrate the methods of reading with vernier caliper, vernier height gauge and vernier depth gauge
- Explain the methods of reading with outside micrometer and depth micrometer.
- Describe the computation of least count of precision measuring instruments.
- List the classification of slip gauge.
- Describe the working of Vernier height master
MODULE-II
- Understand the application of Angular Measurement.
- List the various instruments for angular measurements.
- Describe the parts and working of vernier bevel protractor.
- Illustrate the parts and methods of reading with universal bevel protractor.
- Explain the use of sine bar .
- Describe the use of clinometers.
- Explain the working of auto collimeter
- Understand Miscellaneous Measurements
- Explain the method to check small taper in a recess
- Describe the measurement of internal taper in a blind hole
- Illustrate the measurement of angle of a V groove
- Explain the procedure of measuring the diameter of large holes.
- Describe the measurement of external dovetail slide.
- Describe the measurement of internal dovetail slide
MODULE-III
- Understand the gauges and comparators
- Know the use of dial gauge, limit gauge, go and no go gauge, plug gauge, snap gauge and ring gauge.
- List the advantages and disadvantages of limit gauges.
- Describe the working of profile projector.
- Discuss the function of comparators
- Identify mechanical comparator – Reed type and Zigma type
- Identify electrical and electronic comparator
- Describe the working of optical comparator – zeis optotest comparator
- Describe the pneumatic comparator – solex type
- Compute Surface Finish
- Describe the importance of surface finish
- Define surface roughness
- Discuss the various elements of surface roughness
- Describe working of Tomlinson’s surface meter
- Describe the various methods of measuring surface finish
- Describe the principle and working of Michelsons interferometer and optical flats type A and B
- Discuss the applications of the instruments specified in 3.2.6
- Describe flatness test
- Describe parallelism test
- Compute CLA and RMS values
MODULE-IV
- Understand the working of measuring machines
- Explain the working of Tool maker’s microscope
- Discuss the use of vertical optimeter
- Explain the working of co-ordinate measuring machine
- Explain the working of length bar measuring machine
- Explain the working of universal measuring machine
- Understand Computer Aided Metrology
- Describe laser metrology
- Explain the use of computers in metrology
MODULE-I
For the complete syllabus, results, class timetable, and many other features, kindly download the iStudy App
It is lightweight and easy to use, with no images and no PDFS platform to make students’s lives easier.
MODULE-II
Angular Measurement Instruments used for angular measurements, Vernier bevel protractor, Universal bevel protractor, Sine bar – use of sine bar. Clinometer Miscellaneous Measurement Checking the angle of a tapered recess whose angle of taper is very small Measurement of internal taper in a blind hole Measurement of diameter of large hole, Measurement of angle of a V groove, Measurement of external and internal dovetail slide.
MODULE- III
For the complete syllabus, results, class timetable, and many other features, kindly download the iStudy App
It is lightweight and easy to use, with no images and no pdfs platform to make students’s lives easier.
MODULE – IV
Measuring machines Toolmaker’s microscope – uses – working principle – method of measurement Vertical optimeter – uses – working principle – method of measurement Co-ordinate measuring machine – uses – method of measurement Length bar – uses – method of measurement – Universal measuring machines. Computer Aided Metrology – laser metrology – use of computers – machine vision technology microprocessors in metrology –
Reference Books:
For the complete syllabus, results, class timetable, and many other features, kindly download the iStudy App
It is lightweight and easy to use, with no images and no pdfs platform to make students’s lives easier.
For a detailed syllabus of all other subjects of Tool & Die Engineering, 2015 revision curriculum, do visit Tool & Die 3rd Sem subject syllabuses for 2015 revision.
To see the syllabus of all other branches of the diploma 2015 revision curriculum, visit all branches of SITTTR diploma 2015 revision.