JNTUK B.Tech Instrumentation & Process Control Lab for R13 Batch.

JNTUK B.Tech Instrumentation & Process Control Lab gives you detail information of Instrumentation & Process Control Lab R13 syllabus It will be help full to understand you complete curriculum of the year.

Learning Objectives

• To calibrate and determine the time lag of various first and second order instruments.
• To determine the response in single and two capacity systems with and with-out interaction.
• To understand the advanced control methods used for complex processes in the industries. Different experiments like Flow, level and cascade control can be configured and studied.
• To study the open loop (Manual control) and the on/off controller, Proportional controller, PI controller, PD controller, PID controller, Tuning of controller (Open loop and close loop methods), and to study the stability of the system (Bode plot).
• To understand the control valve operation and its flow characteristics.
• To determine the damping coefficient and response of U-tube manometer.

Experiments

1. Calibration and determination of time lag of various first and second order instruments. Major equipment – First order instrument like Mercury-in-Glass thermometer and overall second order instrument like Mercury-in-Glass thermometer in a thermal well.
2. Experiments with single and two capacity systems with and without interaction. Major equipment- Single tank system, Two-tank systems (Interacting and Non- Interacting).
3. Level control trainer
   Major equipment – Level control trainer set up with computer.
4. Temperature control trainer
   Major equipment -Temperature control trainer with computer.
5. Cascade control
   Major equipment -Cascade control apparatus with computer.
6. Experiments on proportional, reset, rate mode of control etc.
   Major equipment – PID control apparatus
7. Control valve characteristics
   Major equipment – Control valve set up.
8. Estimation of damping coefficient for U-tube manometer
   Major equipment – U-tube manometer.

Outcomes
The student will be able to

• Estimate the dynamic characteristics of first and second order systems.
• Apply the advanced control methods used for complex processes in the industries.
• Screen and suggest controllers like On/off, P, PI, PD and PID for process systems.
• Identify the stability of the system.
• Screen and suggest the types of control valves.

For more information about all JNTU updates please stay connected to us on FB and don’t hesitate to ask any questions in the comment.