JNTUK B.Tech Instrumentation and Bio Process Control gives you detail information of Instrumentation and Bio Process Control R13 syllabus It will be help full to understand you complete curriculum of the year.
UNIT I: PROCESS DYNAMICS
Process variables, Load variables, Dynamics of simple processes. Flow level, Process Dynamics of temperature, pressure and Measurement. Introduction to Second Order process Dynamics
LO: To understand the various process control variables.
LA: Assessment by ability to optimize various process control variables.
UNIT II: INTERACTING AND NON INTERACTING SYSTEMS
Continuous & batch process, Self-Regulator & Servo regulator operation problems.
LO: To understand the self and servo regulator operation.
LA: Assessment by ability to solve problems in self and servo regulator operations.
UNIT III: CONTROL ACTIONS AND CONTROLLERS
Basic control actions-characteristics of two position, three position, proportional, single speed floating. Integral and derivative control modes- P+I. P+D and P+I+D control modes. Problems on pneumatic, hydraulic and electronic controllers to realize various control actions.
LO: To understand the concepts of P, PI, PID controllers.
LA: Assessment by ability to understand the problems in pneumatic, hydraulic and electronic controllers.
UNIT IV: OPTIMUM CONTROLLER SETTINGS
Evaluation criteria, 1/4th decay ratio, IAE. ISE, ITAE- determination of optimum settings for mathematically described process using time response and frequency response. Tuning process reaction curve method-continuous, oscillation method- damped oscillation method-problems.
LO: To understand evaluation criteria using different optimum settings.
LA: Assessment by ability to demonstrate the optimum controller settings for a process.
UNIT V: FINAL CONTROL ELEMENT
I/P Converter-pneumatic, electric and hydraulic actuators- valve positioner- control valves-characteristics of control valves-valve body- Globe, butterfly, diaphragm; Ball valves- Control valve sizing- Cavitation, flashing problem.
LO: To demonstrate the different control valve and problems associated with it.
LA: Assessment by ability to apply different control valve based on process.
UNIT VI: MULTI LOOP CONTROL SYSTEM
Feed forward control-Ratio control-Cascade control-Split range-
Multivariable control and examples from distillation column & Boiler system.
LO: To study the Feed forward control-Ratio control-Cascade control-Split range theories.
LA: Assessment by application of control strategies to distillation and boiler systems.
TEXT BOOKS
- Pollard A, Process control, Heinemann Educational Books London, 1971.
- Harriott P, Process control, 1st edition Reprint, Tata McGraw publishing Co New Delhi, 1991.
- J.R. Leigh, Modeling and Control of fermentation Processes, Revised edition, Peter Peregrinus London, 2000.
- Donald R. Coughanowr, Process Systems Analysis and Control, 3rd edition, McGraw-Hill, 2011.
REFERENCES
- Eckman D. P, Automatic process control, 1st edition, Wiley Eastern Ltd New Delhi, 1993.
- Stephanoupoulis G, Chemical Process Control, 3rd edition, Prentice Hall New Delhi, 1984.
For more information about all JNTU updates please stay connected to us on FB and don’t hesitate to ask any questions in the comment.