Plastic Analysis & Design Detailed Syllabus for Structural Engineering M.Tech first year first sem is covered here. This gives the details about credits, number of hours and other details along with reference books for the course.<\/p>\n
The detailed syllabus for Plastic Analysis & Design M.Tech 2017-2018 (R17) first year first sem is as follows.<\/p>\n
M.Tech. I Year I Sem.<\/p>\n
Course Objectives:<\/strong> To impart knowledge on the analysis of steel structures like continuous beams, steel frames and connection, using Plastic Analysis.<\/p>\n Course Outcomes:<\/strong> The learner will be able to design continuous beams and steel frames<\/p>\n UNIT \u2013 I : Analysis of Structures for Ultimate Load:<\/strong> Fundamental Principles \u2013 statical method of Analysis \u2013 Mechanism method of analysis \u2013 Method of analysis, Moment check \u2013 Carry over factor \u2013 Moment Balancing Method.<\/p>\n UNIT \u2013 II : Design of Continuous Beams:<\/strong> Continuous Beams of uniform section throughout \u2013 Continuous Beams with different cross-sections.<\/p>\n UNIT \u2013 III : Secondary Design Problems:<\/strong> Introduction \u2013 Influence of Axial force on the plastic moment \u2013 influence of shear force \u2013 local buckling of flanges and webs \u2013 lateral buckling \u2013 column stability.<\/p>\n UNIT \u2013 IV : Design of Connections:<\/strong> Introduction \u2013 requirement for connections \u2013 straight corner connections \u2013 Haunched connection \u2013 Interior Beam-Column connections.<\/p>\n UNIT \u2013 V : Design of Steel Frames:<\/strong> Introduction \u2013 Single bay, single storey frames \u2013 simplified procedures for Single span frames \u2013 Design of Gable frames with Haunched Connection. Ultimate Deflections: Introduction \u2013 Deflection at ultimate load \u2013 Deflection at working load \u2013 Deflections of Beams and Single span frames.<\/p>\n REFERENCES:<\/strong><\/p>\n