MN304PC: Mine Surveying MN Syllabus for B.Tech 2nd Year 1st Sem R18 Regulation JNTUH

Mine Surveying detailed syllabus for Mining Engineering (MN), 2nd Year 1st Sem R18 regulation has been taken from the JNTUH official website and presented for the B.Tech students affiliated to JNTUH course structure. For Course Code, Subject Names, Theory Lectures, Tutorial, Practical/Drawing, Credits, and other information do visit full semester subjects post given below. We make sure the result links and syllabus uploaded here is latest and up to date, also the syllabus PDF files can also be downloaded from the universities official website.

For Mining Engineering (MN) 2nd Year 1st Sem R18 Regulation Scheme, do visit MN 2nd Year 1st Sem R18 Scheme. The detailed syllabus for mine surveying is as follows.

Mine Surveying Subject Syllabus for MN 2nd Year 1st Sem R18 Regulation

Pre Requisites:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdf platform to make students’s lives easier.
.

Course Objectives:

To introduce various technologies of surveying on the surface and underground mining situations including distance measurements, leveling, contouring, traversing etc along with descriptions of associated instruments.

Course Outcomes:

Students will get the benefit of fundamentals of surveying knowledge being used for preparation of mine plans. This course gives an opportunity to understand all the techniques of surveying. Students can also get sufficient knowledge on conducting mine surveys using latest instruments and this also provides elementary excursuses using total station, GPS, GIS, data generation, preparation of mine plans in the mining industry.

UNIT – I

UNIT – II

Levelling: Different types leveling instruments and description of parts; Temporary and Permanent adjustments; methods of levelling – fly levelling, differential levelling, and reciprocal levelling. Problems on leveling. Permissible error and distribution of error.
Contouring: Characteristics and uses of contour; contour interval; methods of establishing contours.

UNIT – III

Theodolite – description of parts; Temporary and Permanent Adjustments, Measurement of horizontal and vertical angles, Principles of Electronic Theodolite, Trigonometric levelling. Tacheometry Traversing with Theodolite: Principles of traversing, open traverse and closed traverse using theodolite; Latitude and Departure : consecutive co-ordinates/ dependent co-ordinates and independent co-ordinates/ total coordinates; closing error and correction in closed traversing by different methods- Bowditch method, transit method. Triangulation: Principles and methods of triangulation: classification of triangulation system, signals and towers; base line measurement; calculations of length of base- tape corrections. Astronomical surveying. Center line and gradient control of inclines. Center line of sinking and raising Shafts. Surveying and preparation of slope planes etc. Duties and responsibilities of surveyors. Errors in mine plans and their corrections. Calculation of volumes. Introduction to surveying softwares.

UNIT – IV

UNIT – V

Mine Surveys: Verticality of shaft, measurement of depth of shaft. Correlation Survey: classification and purposes of correlation survey; different methods- single shaft (co-plantation method, weissbach triangle method) and two shaft (Weiss quadrilateral method)
Miscellaneous: EDM and modern instruments, open pit surveys, mine plans and sections, Statutory requirements.

TEXT BOOKS:

Surveying (Vol-1, 2 and 3) by B.C. Punmia, Ashok Kumar Jain and Arun Kumar Jain- Laxmi Publications (P) Ltd., New Delhi.
Surveying (Vol 1 and 2) – Kanitkar

REFERENCE BOOKS:

For detailed syllabus of all the other subjects of B.Tech 2nd Year Mining Engineering (MN), visit Mining Engineering (MN) 2nd Year Syllabus Subjects.

For results of Mining Engineering (MN) 2nd Year 1st Sem R18 Regulation, visit MN 2nd Year 1st Sem R18 Regulation results direct link.

InI JNTUH