Equipment Design for Thermal Systems Detailed Syllabus for Heating Ventilation and Air Conditioning M.Tech first year first sem is covered here. This gives the details about credits, number of hours and other details along with reference books for the course.
The detailed syllabus for Equipment Design for Thermal Systems M.Tech 2017-2018 (R17) first year first sem is as follows.
M.Tech. I Year I Sem.
UNIT -I: Classification Of Heat Exchangers: Introduction, Recuperation & regeneration, Tabular heat exchangers, Double pipe, shell & tube heat exchanger, Plate heat Exchangers, Gasketed plate heat exchanger. Spiral plate heat exchanger, Lamella heat exchanger, Extended surface heat exchanger, Plate fin and Tabular fin. Basic Design Methods of Heat Exchanger: Introduction, Basic equations in design, Overall heat transfer coefficient, LMTD method for heat exchanger analysis, Parallel flow, Counter flow. Multipass, cross flow heat exchanger design calculations:
UNIT-II: Double Pipe Heat Exchanger: Film coefficient for fluids in annulus, fouling factors, Calorific temperature, Average fluid temperature, The calculation of double pipe exchanger, Double pipe exchangers in series parallel arrangements. Shell & Tube Heat Exchangers: Tube layouts for exchangers, Baffle heat exchangers, Calculation of shell and tube heat exchangers, Shell side film coefficients, Shell side equivalent diameter, The true temperature difference in a 1-2 heat exchanger. Influence of approach temperature on correction factor. Shell side pressure drop, Tube side pressure drop, Analysis of performance of 1-2 heat exchanger and design of shell & tube heat exchangers, Flow arrangements for increased heat recovery, the calculation of 2-4 exchangers.
UNIT-III: Condensation of Single Vapours: Calculation of horizontal condenser, Vertical condenser, DeSuper heater condenser, Vertical condenser-sub-Cooler, Horizontal Condenser-Sub cooler, Vertical reflux type condenser. Condensation of steam.
UNIT-IV: Vaporizers, Evaporators and Reboilers: Vaporizing processes, Forced circulation vaporizing exchanger, Natural circulation vaporizing exchangers, Calculations of a reboiler. Extended Surfaces: Longitudinal fins. Weighted fin efficiency curve, Calculation of a Double pipe fin efficiency curve. Calculation of a double pipe finned exchanger, Calculation of a longitudinal fin shell and tube exchanger.
UNIT-V: Direct Contact Heat Exchanger: Cooling towers, relation between wet bulb & dew point temperatures, The Lewis number and Classification of cooling towers, Cooling tower internals and the roll of fill, Heat Balance. Heat Transfer by simultaneous diffusion and convection, Analysis of cooling tower requirements, Deign of cooling towers, Determination of the number of diffusion units, Calculation of cooling tower performance.
REFERENCES:
- Process Heat Transfer/D.Q.Kern/ TMH
- Heat Exchanger Design/ A.P.Fraas and M N. Ozisicj/ John Wiley & sons, New York.
- Cooling Towers / J.D. Gurney
For all other M.Tech 1st Year 1st Sem syllabus go to JNTUH M.Tech Heating Ventilation and Air Conditioning 1st Year 1st Sem Course Structure for (R17) Batch.
All details and yearly new syllabus will be updated here time to time. Subscribe, like us on facebook and follow us on google plus for all updates.
Do share with friends and in case of questions please feel free drop a comment.