JNTUH Released Exam Time Table for UG/PG Courses Regular/Supplementary September 2020. JNTUH Released B.Tech 4-2 Sem R16 Regular/Supply Exam Time Table Sep 2020 with (Re-Scheduled Date) for All Branch is Given Below in Detail.
JNTUH released B.Tech, B.Pharm, MBA & MCA for all semesters R17, R15, R16 & R13 regular/supplementary exam time table Sep 2020
We publish all the latest JNTUH Timetables of Regular / Supplementary Examination as soon as these data sheets are announced by the university on their official notification portal.
Apart from the date sheet, you may also get the latest updates and results right on our website as well. You will get all the latest information and activities of JNTUH
You can check JNTUH B.Tech 4-2 Sem R16 regular/supplementary exam time table exam timings, exam dates, the gap in each exam given below. Students are advised to check the timetable in detail and prepare well for exams to get better results.
JNTUH B.Tech 4-2 Sem R16 All Branch Regular/Supplementary Examination September 2020 Timing follow below
TIME – AN: 2.30 PM to 4.30 PM
FN: 10.30 AM TO 12:30 PM
JNTUH B.Tech 4-2 Sem R16 Regular/Supply Exam Time Table 2020 (Re-Scheduled Date)
| BRANCH | TIMINGS | 16-09-2020 WEDNESDAY | 18-09-2020 FRIDAY | 20-09-2020 SUNDAY | 27-09-2020 SUNDAY | 25-09-2020 FRIDAY |
|---|---|---|---|---|---|---|
| CIVIL ENGINEERING (01-CE) | FN: 10.30 AM TO 12:30 PM | ES | E6 | OE3 | E5 | E6 |
| FN: 10.30 AM TO 12:30 PM | Waste Management. | Industrial Waste Water Treatment | Air Transportation Systems | Elements of Earthquake Engineering. Common to (CE,CEE) | Geoenvironmental Engineering Common to (CE,CEE) | |
| FN: 10.30 AM TO 12:30 PM | Pavement Design | ——— | Basics of Thermodynamics | ——— | Finite Element Methods for Common to (CE,CEE) | |
| FN: 10.30 AM TO 12:30 PM | Water Resources Systems Analysis. | ——— | Characterization of Nanomaterials | ——— | Design and Drawing of Irrigation Structures. | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Concepts of Nano Science And Technology | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Data Analytics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Design and Selection of Engineering Materials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Disaster Management | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Electromagnetic Interference and Compatibility | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Electronic Measuring Instruments | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Entrepreneur Resource Planning | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Fundamentals of Liquefied Natural Gas | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Health & Safety in Mines | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Health, Safety and Environment in Petroleum Industry | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Industrial Safety, Health, and Environmental Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Introduction to Mechatronics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Linux Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Management Information Systems | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Microprocessors and Microcontrollers | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Organizational Behaviour | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | PC Based Instrumentation | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | PHP Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Production Planning and Control | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | R Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Reliability Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Remote Sensing and GIS | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Renewable Energy Sources | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Rockets and Missiles | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Sensors and Transducers, | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Solid Fuel Technology | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Synthesis of Nanomaterials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Telemetry and Telecontrol | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Total Quality Management | ——— | ——— | |
| MECHANICAL ENGINEERING (03-ME) | FN: 10.30 AM TO 12:30 PM | E5 | E6 | OE3 | E6 | E5 |
| FN: 10.30 AM TO 12:30 PM | Fluid Power System | Advanced Mechanics of Solids | Air Transportation Systems | Automobile Engineering (ME,MSNT | Automation in Manufacturing ( Common ME, MECT, MSNT ) | |
| FN: 10.30 AM TO 12:30 PM | Renewable Energy Sources | Unconventional Machining Processes | Characterization of Nanomaterials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | Production Planning and Control | Advanced Materials Technology | Concepts of Nano Science And Technology | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Data Analytics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Design and Selection of Engineering Materials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Disaster Management | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Electromagnetic Inte1ference and Compatibility | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Electronic Measuring Instrnments | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Entrepreneur Resource Planning | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Entrepreneurship and Small Business Enterprises | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Environmental Impact Assessment | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Fundamentals of Liquefied Natural Gas | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Health & Safety in Mines | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Health , Safety and Environment in Petroleum Industry | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Introduction to Mechatronics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Linux Programming; | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Management Information Systems | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Microprocessors and Microcontrollers | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Optimization Techniques in Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Organizational Behaviour | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | PC Based Instrnmentation | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | PHP Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Production Planning and Control | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | R Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Remote Sensing and GIS | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Renewable Energy Sources | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Rockets and Missiles | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Sensors and Transducers, | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Solid Fuel Technology | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Synthesis of Nanomaterials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Telemetry and Telecontrol | ——— | ——— | |
| ELECTRONICS AND COMMUNICAT ION ENGINEERING (04-ECE) | FN: 10.30 AM TO 12:30 PM | ES | E6 | OE3 | E5 | E5 |
| FN: 10.30 AM TO 12:30 PM | Network Security and Cryptography | Actuators and Robot Systems | Air Transportation Systems | Optical Communications ( Common TO ECE,ETM) | Machine Learning (Common ECE, EIE, BME) | |
| FN: 10.30 AM TO 12:30 PM | System Design Using FPGAs | Analog CMOS IC Design | Organizational Behaviour | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | Global Positioning System | Basics of Thermodynamics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | Computer Vision | Management Information Systems | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Characterization of Nanomaterials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Entrepreneur Resource Planning | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Concepts of Nano Science And Technology | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Data Analytics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Design and Selection of Engineering Materials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Disaster Management | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Electromagnetic Interference and Compatibility | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Entrepreneurship and Small Business Enterprises | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Environmental Impact Assessment | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Fundamentals of Liquefied Natural Gas | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Health & Safety in Mines | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Health, Safety and Environment in Petroleum Industry | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Industrial Safety, Health, and Environmental Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Introduction to Mechatronics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Linux Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Microprocessors and Microcontrollers | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Optimization Techniques in Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | PC Based Instrumentation | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | PUP Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Production Planning and Control | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | R Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Reliability Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Remote Sensing and GIS | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Renewable Energy Sources | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Rockets and Missiles | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Sensors and Transducers, | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Solid Fuel Technology | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Synthesis of Nanomaterials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Telemetry and Telecontrol | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Total Quality Management | ——— | ——— | |
| ELECTRONICS AND INSTRUMENT ATION ENGINEERING (10-EIE) | FN: 10.30 AM TO 12:30 PM | E5 | ——— | OE3 | E6 | E6 |
| FN: 10.30 AM TO 12:30 PM | Neural Networks and Fuzzy Logic | MEMS and Applications | Air Transportation Systems | Internet of Things Common EIE,BME, E.Comp.E | Machine Learning _(Common ECE,EIE, BME) | |
| FN: 10.30 AM TO 12:30 PM | Computer Networks | ——— | Basics of Thermodynamics | Reliability Engineering (Common EIE, AME) | DSP Processors and Architectures (Common To EIE, BME) | |
| FN: 10.30 AM TO 12:30 PM | Industrial Data Communications | ——— | Characterization of Nanomaterials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Concepts of Nano Science And Technology | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Data Analytics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Design and Selection of Engineering Materials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Disaster Management | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Electromagnetic Interference and Compatibility | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Electronic Measuring Instruments | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Entrepreneur Resource Planning | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Entrepreneurship and Small Business Enterprises | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Environmental Impact Assessment | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Fundamentals of Liquefied Natural Gas | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Health & Safety in Mines | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Health, Safety and Environment in Petroleum Industry | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Industrial Safety, Health, and Environmental Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Introduction to Mechatronics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Linux Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Management Information Systems | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Microprocessors and Microcontrollers | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Optimization Techniques in Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Organizational Behaviour | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | PHP Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Production Planning and Control | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | R Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Reliability Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Remote Sensing and GIS | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Renewable Energy Sources | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Rockets and Missiles | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Solid Fuel Technology | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Synthesis of Nanomaterials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Telemetry and Telecontrol | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Total Quality Management | ——— | ——— | |
| BIO-MEDICAL ENGINEERING (11-BME) | FN: 10.30 AM TO 12:30 PM | E6 | E5 | OE3 | ES | E6 |
| FN: 10.30 AM TO 12:30 PM | Bio MEMS | Medical Info1matics | Air Transportation Systems | Internet of Things- (Common EIE,BME, E.Comp.E) | Machine Learning (Common ECE, EIE, BME) | |
| FN: 10.30 AM TO 12:30 PM | ——— | Physiological Systems Management | Basics of Thermodynamics | ——— | Biometric Systems | |
| FN: 10.30 AM TO 12:30 PM | ——— | Embedded System Design | Linux Programming | ——— | DSP Processors and Architectures (Common To EIE, BME) | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Characterization of Nanomaterials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Concepts of Nano Science And Technology | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Data Analytics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Design and Selection of Engineering Materials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Disaster Management | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Electronic Measuring Instmments | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Entrepreneur Resource Planning | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Entrepreneurship and Small Business Enterprises | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Environmental Impact Assessment | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Fundamentals of Liquefied Natural Gas | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Health & Safety in Mines | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Health , Safety and Environment in Petroleum Industry | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Industrial Safety, Health , and Environmental Engineering; | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Introduction to Mechatronics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Management Information Systems | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Microprocessors and Microcontrollers | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Optimization Techniques in Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Organizational Behaviour | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | PC Based Instmmentation | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | PHP Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Production Planning and Control | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | R Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Reliability Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Remote Sensing and GIS | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Renewable Energy Sources | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Rockets and Missiles | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Sensors and Transducers | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Solid Fuel Technology | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Synthesis of Nanomaterials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Total Quality Management | ——— | ——— | |
| MECHANICAL ENGINEERING (MECHATRONICS) (14-MECT) | FN: 10.30 AM TO 12:30 PM | E6 | ES | OE3 | E6 | E5 |
| FN: 10.30 AM TO 12:30 PM | Automotive Pollution and Control | Product Design and Assembly Automation | Air Transportation Systems | MEMS Design | Automation in Manufacturing ( Common Common ME, MECT MSNT ) | |
| FN: 10.30 AM TO 12:30 PM | Power Plant Engineering | MATLAB Applications | Basics of Thermod ynamics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | Computational Fluid Dynamics | Mechanical Vibrations | Characterization of Nanomaterials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Telemetry and Telecontrol | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Total Quality Management | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Concepts of Nano Science And Technology | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Data Analytics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Design and Selection of Engineering Materials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Disaster Management | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Electromagnetic Interference and Compatibility | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Electronic Measuring Instruments | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Entrepreneur Resource Planning | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Environmental Impact Assessment | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Fundamentals of Liquefied Natural Gas | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Health & Safety in Mines | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Health, Safety and Environment in Petroleum Industry | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Industrial Safety, Health, and Environmental Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Introduction to Mechatronics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Linux Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Management Information Systems | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Microprocessors and Microcontrollers | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Optimization Techniques in Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Organizational Behaviour | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | PC Based Instrumentation | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | PUP Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | R Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Reliability Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Remote Sensing and GIS | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Rockets and Missiles | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Sensors and Transducers, | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Synthesis of Nanomaterials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Solid Fuel Technology | ——— | ——— | |
| EIECTRONICS AND TELEMATICS ENGINEERING (17-ETM) | FN: 10.30 AM TO 12:30 PM | E6 | E6 | OE3 | ES | ——— |
| FN: 10.30 AM TO 12:30 PM | Radar System | Satellite Communications | Air Transportation Systems | Optical Communications Common To ECE,ETM) | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | Cloud computing | Basics of Thermodynamics | Advanced Telecommunication Technologies | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | Wireless and Mobile Adhoc Networks | Telemetry and Telecontrol | Database Management Systems | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Characterization of Nanomaterials | Wireless Communications and Networks | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Total Quality Management | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Concepts of Nano Science And Technology | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Data Analytics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Design and Selection of Engineering Materials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Disaster Management | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Electromagnetic Interference and Compatibility | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Entrepreneur Resource Planning | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Entrepreneurship and Small Business Enterprises | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Environmental Impact Assessment | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Fundamentals of Liquefied Natural Gas | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Health & Safety in Mines | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Health, Safety and Environment in Petroleum Industry | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Industrial Safety, Health, and Environmental Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Introduction to Mechatronics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Linux Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Management Information Systems | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Microprocessors and Microcontrollers | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Optimization Techniques in Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Organizational Behaviour | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | PC Based Instrumentation | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | PHP Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Production Planning and Control | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | R Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Reliability Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Remote Sensing and GIS | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Renewable Energy Sources | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Rockets and Missiles | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Sensors and Transducers , | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Solid Fuel Technology | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Synthesis of Nanomaterials | ——— | ——— | |
| ELECTRONICS AND COMPUTER ENGINEERING (19-E.COMP.E) | FN: 10.30 AM TO 12:30 PM | E5 | E5 | OE3 | E6 | E6 |
| FN: 10.30 AM TO 12:30 PM | Computer Graphics | VLSI Design (Common to EEE, E.Comp.E) | Air Transportation Systems | Internet of Things (Common EIE, BME, E.Comp.E) | Advanced Computer Architecture | |
| FN: 10.30 AM TO 12:30 PM | Data Warehousing and Data Mining | ——— | Basics of Thermodynamics | ——— | Data Communications | |
| FN: 10.30 AM TO 12:30 PM | Real Time Operating Systems | ——— | Characterization of Nanomaterials | ——— | Multimedia and Rich Internet Applications | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Synthesis of Nanomaterials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Concepts of Nano Science And Technology | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Solid Fuel Technology | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Design and Selection of Engineering Materials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Disaster Management | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Electromagnetic Interference and Compatibility | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Electronic Measuring Instruments | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Entrepreneur Resource Planning | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Entrepreneurship and Small Business Enterprises | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Environmental Impact Assessment | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Fundamentals of Liquefied Natural Gas | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Health & Safety in Mines | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Health, Safety and Environment in Petroleum Industry | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Industrial Safety, Health, and Environmental Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Introduction to Mechatronics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Linux Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Management Information Systems | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Microprocessors and Microcontrollers | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Optimization Techniques in Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Organizational Behaviour | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | PC Based Instrumentation | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | PHP Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Production Planning and Control | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | R Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Reliability Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Remote Sensing and GIS | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Renewable Energy Sources | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Rockets and Missiles | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Sensors and Transducers | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Telemetry and Telecontrol | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Total Quality Management | ——— | ——— | |
| AERONAUTICAL ENGINEERING (21-AE) | FN: 10.30 AM TO 12:30 PM | E6 | ES | (OE3) | E6 | E6 |
| FN: 10.30 AM TO 12:30 PM | Ground Vehicle Aerodynamics | Helicopter Engineering | Basics of Thermodynamics | Wind Engineering and Industrial Aerodynamics | Heat Transfer | |
| FN: 10.30 AM TO 12:30 PM | Aeroelasticity | Fabrication and Machining of Composite Strnctures | Telemetry and Telecontrol | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | Airlines Planning, Scheduling and Operations | Total Quality Management | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | Hypersonic aerodynamics | Characterization of Nanomaterials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Concepts of Nano Science And Technology | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Data Analytics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Design and Selection of Engineering Materials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Disaster Management | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Electromagnetic Interference and Compatibility | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Electronic Measuring Instruments | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Entrepreneur Resource Planning | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Entrepreneurship and Small Business Enterprises | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Environmental Impact Assessment | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Fundamentals of Liquefied Natural Gas | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Health & Safety in Mines | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Health, Safety and Environment in Petroleum Industry | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Industrial Safety, Health, and Environmental Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Introduction to Mechatronics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Linux Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Management Information Systems | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Microprocessors and Microcontrollers | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Optimization Techniques in Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Organizational Behaviour | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | PC Based Instrumentation | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | PHP Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Production Planning and Control | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | R Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Reliability Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Remote Sensing and GIS | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Renewable Energy Sources | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Sensors and Transducers, | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Solid Fuel Technology | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Synthesis of Nanomaterials | ——— | ——— | |
| AUTOMOBILE ENGINEERING (24-AME) | FN: 10.30 AM TO 12:30 PM | E5 | E6 | OE3 | E5 | E5 |
| FN: 10.30 AM TO 12:30 PM | Finite Element Methods | Maintenance and Safety Engineering | Air Transportation Systems | Reliability Engineering (Common EIE,AME ) | Plant Layout and Material Handling | |
| FN: 10.30 AM TO 12:30 PM | ——— | Green Engineering Systems | Total Quality Management | Vehicle Transpo1t Management | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | Off-road Vehicles | Basics of Thermod ynamics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | Vehicle Condition Monitoring | Characterization of Nanomaterials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Synthesis of Nanomaterials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Concepts of Nano Science And Technology | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Data Analytics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Design and Selection of Engineering Materials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Disaster Management | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Electromagnetic Interference and Compatibility | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Electronic Measuring Instruments | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Entrepreneur Resource Planning | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Entrepreneurship and Small Business Enterprises | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Environmental Impact Assessment | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Fundamentals of Liquefied Natural Gas | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Health & Safety in Mines | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Health, Safety and Environment in Petroleum Industry | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Industrial Safety, Health, and Environmental Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Linux Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Management Information Systems | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Optimization Techniques in Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Organizational Behaviour | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | PC Based Instrumentation | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | PHP Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Production Planning and Control | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | R Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Reliability Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Remote Sensing and GIS | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Renewable Energy Sources | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Rockets and Missiles | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Sensors and Transducers, | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Telemetry and Telecontrol | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Solid Fuel Technology | ——— | ——— | |
| MINING ENGINEERI NG (25 – MNE) | FN: 10.30 AM TO 12:30 PM | E5 | E6 | OE3 | E5 | ——— |
| FN: 10.30 AM TO 12:30 PM | Environmental Management in Mines | Mine Ventilation | Air Transportation Systems | Planning of Underground Metal Mining Project | ——— | |
| FN: 10.30 AM TO 12:30 PM | Coal Gasification, Coal Bed Methane & Shale Gas | Advanced Environmental Engineering | Synthesis of Nanomaterials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | Computer Applications in Mining | Basics of Thermodynamics | ——— | ——— | ||
| FN: 10.30 AM TO 12:30 PM | ——— | Advanced Underground Coal Mining Technology | Telemetry and Telecontrol | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | Tunnel Engineering | Characterization of Nanomaterials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Concepts of Nano Science And Technology | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Data Analytics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Design and Selection of Engineering Materials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Disaster Management | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Electromagnetic Interference and Compatibility | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Electronic Measuring Instruments | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Entrepreneur Resource Planning | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Entrepreneurship and Small Business Enterprises | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Environmental Impact Assessment | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Fundamentals of Liquefied Natural Gas | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Total Quality Management | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Health, Safety and Environment in Petroleum Industry | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Industrial Safety, Health, and Environmental Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Introduction to Mechatronics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Linux Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Management Information Systems | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Microprocessors and Microcontrollers | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Optimization Techniques in Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Organizational Behaviour | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | PC Based Instrumentation | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | PHP Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Production Planning and Control | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | R Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Reliability Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Remote Sensing and GIS | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Renewable Energy Sources | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Rockets and Missiles | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Sensors and Transducers, | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Renewable Energy Sources | ——— | ——— | |
| PETROLEUM ENGINEERING (27 – PTME) | FN: 10.30 AM TO 12:30 PM | E5 | E6 | OE3 | E5 | ——— |
| FN: 10.30 AM TO 12:30 PM | Subsea Engineering | Enhanced Oil Recovery Techniques | Air Transportation Systems | Membrane Technology | ——— | |
| FN: 10.30 AM TO 12:30 PM | Natural Gas Hydrates and Coal Bed Methane | Multi-phase Flow in Porous Media | Basics of Thermodynamics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | Petroleum Management, Marketing and Finance | Characterization of Nanomaterials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Concepts of Nano Science And Technology | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Data Analytics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Design and Selection of Engineering Materials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Electromagnetic Interference and Compatibility | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Electronic Measuring Instruments | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Entrepreneur Resource Planning | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Entrepreneurship and Small Business Enterprises | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Environmental Impact Assessment | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Health & Safety in Mines | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Industrial Safety, Health, and Environmental Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Introduction to Mechatronics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Linux Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Management Information Systems | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Microprocessors and Microcontrollers | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Optimization Techniques in Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Organizational Behaviour | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | PC Based Instrumentation | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | PHP Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Production Planning and Control | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | R Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Reliability Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Remote Sensing and GIS | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Renewable Energy Sources | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Rockets and Missiles | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Sensors and Transducers, | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Solid Fuel Technology | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Synthesis of Nanomaterials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Telemetry and Telecontrol | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Total Quality Management | ——— | ——— | |
| CIVIL & ENVIRONMENT AL ENGINEERING (28-C E E) | FN: 10.30 AM TO 12:30 PM | E5 | E6 | OE3 | E6 | E5 |
| FN: 10.30 AM TO 12:30 PM | Estimation and Costing | Stochastic Hydrology | Air Transportation Systems | Elements of Earthquake Engineering. (Common TO CE,CEE) | Geo environmental Engineering (Common to CE,CEE) | |
| FN: 10.30 AM TO 12:30 PM | Foundation Engineering | Traffic Engineering | Basics of Thermodynamics | ——— | Finite Element Methods for Civil Engineering (Common to CE,CEE) | |
| FN: 10.30 AM TO 12:30 PM | ——— | Ground Improvement Techniques | Characterization of Nanomaterials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Concepts of Nano Science And Technology | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Data Analytics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Design and Selection of Engineering Materials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Disaster Management | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Electromagnetic Interference and Compatibility | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Electronic Measuring Instruments | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Entrepreneur Resource Planning | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Environmental Impact Assessment | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Fundamentals of Liquefied Natural Gas | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Health & Safety in Mines | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Health, Safety and Environment in Petroleum Industry | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Industrial Safety, Health, and Environmental Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Introduction to Mechatronics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Linux Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Management Information Systems | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Microprocessors and Microcontrollers | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Optimization Techniques in Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Organizational Behaviour | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | PC Based Instrumentation | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | PHP Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Production Planning and Control | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | R Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Reliability Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Rockets and Missiles | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Telemetry and Telecontrol | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Total Quality Management | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Sensors and Transducers, | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Synthesis of Nanomaterials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Solid Fuel Technology | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Renewable Energy Sources | ——— | ——— | |
| MECHANICAL ENGINEERING (MATERIAL SCIENCE & NANO TECHNOLOGY) (29 – MSNT) | FN: 10.30 AM TO 12:30 PM | E6 | ES | OE3 | ES | ES |
| FN: 10.30 AM TO 12:30 PM | Nano Composites | Tribology | Air Transpo1tation Systems | Automobile Engineering ( Common ME, MSNT) | Automation in Manufacturing (Common ME, MECT, MSNT) | |
| FN: 10.30 AM TO 12:30 PM | Carbon Nano Materials and Applications | Mechanics of Composite Materials | Total Quality Management | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | MEMS – NEMS Design and Applications | ——— | Basics of Thermodynamics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | Nano Sensors and Actuators | ——— | Renewable Energy Sources | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Rockets and Missiles | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Telemetry and Telecontrol | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Remote Sensing; and GIS | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Sensors and Transducers, | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Data Analytics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Design and Selection of Engineering Materials | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Disaster Management | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Electromagnetic Interference and Compatibility | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Electronic Measuring Instrnments | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Entrepreneur Resource Planning Entrepreneurship and Small Business Enterprises | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Environmental Impact Assessment | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Fundamentals of Liquefied Natural Gas | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Health & Safety in Mines | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Health, Safety and Environment in Petroleum Industry | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Industrial Safety, Health , and Environmental Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Introduction to Mechatronics | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Linux Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Management Information Systems | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Microprocessors and Microcontrollers | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Optimization Techniques in Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Organizational Behaviour | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | PC Based Instrnmentation | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | PHP Programming | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Production Planning and Control | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | R Programming; | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Reliability Engineering | ——— | ——— | |
| FN: 10.30 AM TO 12:30 PM | ——— | ——— | Solid Fuel Technology | ——— | ——— | |
| ELECTRICAL AND ELECTRONICS ENGINEERING (02-EEE) | AN: 2.30 PM to 4.30 PM | E5 | E6 | OE3 | ——— | ——— |
| AN: 2.30 PM to 4.30 PM | Artificial Neural Networks and Fuzzy Systems | Smart Electric Grid | Air Transportation Systems | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | Electrical Distribution Systems | Utilization of Electric Power | Basics of Thermodynamics | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | Wind, Solar and Hybrid Energy Systems | Electric and Hybrid Vehicles | Characterization of Nanomaterials | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | High Voltage Engineering | VLSI DESIGN | Concepts of Nano Science And Technology | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Data Analytics | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Design and Selection of Engineering Materials | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Disaster Management | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Electromagnetic Interference and Compatibility | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Electronic Measuring Instruments | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Entrepreneurship and Small Business Enterprises | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Environmental Impact Assessment | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Fundamentals of Liquefied Natural Gas | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Health & Safety in Mines | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Health, Safety and Environment in Petroleum Industry | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Industrial Safety, Health, and Environmental Engineering | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Introduction to Mechatronics | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Linux Programming | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Microprocessors and Microcontrollers | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Optimization Techniques in Engineering | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | PC Based Instrumentation | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | PHP Programming | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Production Planning and Control | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | R Programming | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Reliability Engineering | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Remote Sensing and GIS | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Renewable Energy Sources | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Rockets and Missiles | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Sensors and Transducers, | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Solid Fuel Technology | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Synthesis of Nanomaterials | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Telemetry and Telecontrol | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Total Quality Management | ——— | ——— | |
| COMPUTER SCIENCE AND ENGINEERING (05-CSE) | AN: 2.30 PM to 4.30 PM | E5 | E6 | OE3 | ——— | ——— |
| AN: 2.30 PM to 4.30 PM | Information Theory & Coding | Advanced Algorithms | Air Transportation Systems | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | Real-Time Systems (Common to CSE. IT) | Web Services and Service Oriented Architecture | Basics of Thermodynamics | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | Data Analytics ( Common to CSE, IT) | Computer Forensics | Characterization of Nanomaterials | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | Modem Software Engineering (Common To CSE, IT) | Neural Networks and Deep Learning (Common to CSE. IT) | Concepts of Nano Science And Technology | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Data Analytics | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Design and Selection of Engineering Materials | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Disaster Management | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Electromagnetic Interference and Compatibility | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Electronic Measuring Instruments | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Entrepreneur Resource Planning | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Entrepreneurship and Small Business Enterprises | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Environmental Impact Assessment | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Fundamentals of Liquefied Natural Gas | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Health & Safety in Mines | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Health, Safety and Environment in Petroleum Industry | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Industrial Safety, Health, and Environmental Engineering | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Introduction to Mechatronics | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Management Information Systems | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Microprocessors and Microcontrollers | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Optimization Techniques in Engineering | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Organizational Behaviour | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | PC Based Instrumentation | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Production Planning and Control | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Reliability Engineering | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Renewable Energy Sources | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Rockets and Missiles | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Sensors and Transducers, | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Solid Fuel Technology | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Synthesis of Nanomaterials | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Telemetry and Telecontrol | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Total Quality Management | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Remote Sensing and GIS | ——— | ——— | |
| INFORMATION TECHNOLOGY (12- I T) | AN: 2.30 PM to 4.30 PM | E5 | E6 | OE3 | ——— | ——— |
| AN: 2.30 PM to 4.30 PM | Steganography and Watermarking | Intrnsion Detection System | Air Transportation Systems | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | Real-Time Systems (Common to CSE. IT) | ADHOC and Sensor Networks | Basics of Thermodynamics | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | Data Analytics Common to CSE, IT) | Human Computer Interaction | Telemetry and Telecontrol | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | Modem Software Engineering (Common To CSE, IT) | Neural Networks and Deep Leaming (Common To CSE, IT) | Characterization of Nanomaterials | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Total Quality Management | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Concepts of Nano Science And Technology | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Data Analytics | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Design and Selection of Engineering Materials | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Disaster Management | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Electromagnetic Inte1ference and Compatibility | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Electronic Measuring Instrnments | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Entrepreneur Resource Planning | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Entrepreneurship and Small Business Enterprises | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Environmental Impact Assessment | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Fundamentals of Liquefied Natural Gas | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Health & Safety in Mines | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Health , Safety and Environment in Petroleum Industry | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Industrial Safety, Health, and Environmental Engineering | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Introduction to Mechatronics | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Management Information Systems | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Microprocessors and Microcontrollers | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Optimization Techniques in Engineering | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Organizational Behaviour | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | PC Based Instrnmentation | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Production Planning and Control | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Reliability Engineering | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Remote Sensing and GIS | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Renewable Energy Sources | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Rockets and Missiles | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Sensors and Transducers, | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Solid Fuel Technology | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Synthesis of Nanomaterials | ——— | ——— | |
| AN: 2.30 PM to 4.30 PM | ——— | ——— | Rockets and Missiles | ——— | ——— |
All other notification and new updates keep visiting InI All About JNTUH Subscribe, like us on facebook and don’t forget to download our app iStudy
Do share with friends and in case of questions please feel free to drop a comment.
Wish you All Good Luck !!