18C-404C: Quantity Surveying Syllabus for Civil Engineering 4th Sem C18 Curriculum TSSBTET

Quantity Surveying detailed Syllabus for Civil Engineering (DCE), C18 curriculum has been taken from the TSSBTET official website and presented for the diploma students. For Course Code, Course Name, Lectures, Tutorial, Practical/Drawing, Internal Marks, Max Marks, Total Marks, Min Marks and other information, do visit full semester subjects post given below.

For all other Diploma in Civil Engineering (DCE) Syllabus for 4th Sem C18 Curriculum TSSBTET, do visit Diploma in Civil Engineering (DCE) Syllabus for 4th Sem C18 Curriculum TSSBTET Subjects. The detailed Syllabus for quantity surveying is as follows.

Pre requisites

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Course Outcomes:

Up on completion of the Course, the student will be able to

CO Identify different items of works and their units and specifications.
CO Prepare approximate and detailed estimates, estimate of quantities of different items of works.
CO Prepare data sheets for different items of works and abstract estimate.
CO Prepare leads statement, and determine the quantity of earth work by various methods.
CO Prepare detailed estimates of Roads and Culverts.
CO Prepare detailed estimate for irrigation works.

UNIT 1: Introduction, Unit of measurements and Specifications Duration: 8 Periods(L:60 – T:20)

Quantity surveying – Definition of estimate – Need for estimation – Types of estimates -Approximate estimate – Detailed estimate – Abstract estimate – Duties of Quantity Surveyor – Elements of a structure – Item of Work – Materials of construction – Line diagram for preparation of abstract estimate
Units of measurements for various items of Civil engineering works as per IS :1200
Degree of accuracy in measurement – Deductions for openings in masonry, RCC and Plastering – Painting coefficients
Specifications – Necessity – Types of specifications – General specifications of:
1. Earth works
2. Brick / Stone Masonry with C.M
3. Reinforced Cement Concrete
4. Plastering with C.M
5. Floor finishes with ceramic tiles and marbles
6. White washing / Colour washing
Types of estimates – Preliminary or Approximate Estimate – Detailed EstimateAbstract Estimate – Definitions – Formats for detailed and abstract estimates.
Preliminary or Approximate Estimate – Plinth area method – Cubic rate method – Service Unit method
Problems in Preliminary estimate

UNIT 2: Estimates of Buildings Duration: 12 Periods(L:90 – T:30)

UNIT 3: Analysis of Rates and Abstract Estimates Duration: 12 Periods(L:90 – T:30)

Analysis of Rates-Definition and Purpose
Standard Data Book, SSR, Standard data sheet
Cost of materials at source and at site
Standard Schedule of Rates of different materials in buildings works
Types of labour – Wages as per S S R
Lead and Lift – Preparation of Lead Statement
Data Sheets – Standard data for materials and labour components for different items of work
Preparation of unit rates for finished items of works using Standard data and S S R
Methods of calculating quantities of ingredients of various proportions of cement mortar and cement concrete.
Provisions for different building services and other overhead charges
Prepare abstract estimate for:
1. Single bedroom building (1 BHK)
2. Two bedroom building with veranda (2 BHK)

UNIT 4: Earth Work Calculations Duration: 8 Periods(L:60 – T:20)

Lead and Lift – Initial and subsequent values-Standard values
Mid- sectional Area Method – Mean Sectional Area Method – Trapezoidal Rule -Prismoidal Rule for computing volumes in level sections for roads and Canals and their limitations
Taking out quantities from Longitudinal Section and Cross Section in cutting and embankment of level sections -Calculation of Areas
Capacity of Reservoir from the table of areas and contours

UNIT 5: Detailed Estimates of Roads and Culverts Duration: 10 Periods(L:75 – T:25)

UNIT 6: Detailed Estimates of Public Health Engineering works Duration: 10 Periods(L:75 – T:25)

Open well with masonry staining
R C Over head tank
Septic tank and soak pit

Reference Books:

Estimating and Costing – B.N. Dutta
Estimating and Costing – S. C. Rangawala

Suggested E-learning references

Suggested Student Activities

The topic should be related to the course in order to enhance his knowledge, practical skill & and lifelong learning, communication, modern tool usage.
Prepare Check list for different items of following type of Civil Engineering works.
1. Load Bearing Building Structure.
2. Framed structure type of building
3. W.B.M.Road
4. Septic Tank
5. Community well
Writing the rules of deduction of openings for below mentioned items of work as per IS1200.
1. Brick / Stone masonry
2. Plastering / Pointing
Preparing detailed estimate of a RCC single & two storied existing residential building for all items of work.
Prepare the lead statement for earth work excavation for a Road.
Prepare the lead and lift statement for a building.
Collect the market data for cost of construction materials and implement in rate analysisand compare it with the SR book.
Rate analysis to be done for construction activities by using alternate materials like M-sand for River sand and analyse the difference of rates.
Rate analysis for works under Lump sum (LS) head to be studied in detail and comparedwith present SR.
Reconciliation of materials for a particular item need to done for an ongoing project.
Detailed estimate for any two or more residential buildings to be compared and rate per unit area to be find out which will help in present market survey.

For detail Syllabus of all other subjects of Civil Engineering, C18 curriculum do visit Diploma In Civil Engineering 4th Sem Syllabus for C18 curriculum.

For all Civil Engineering results, visit TSSBTET DCE all semester results direct links.

InI JNTUH