18A-403C: Strength of Materials and Fluid Mechanics Syllabus for Automobile Engineering 4th Sem C18 Curriculum TSSBTET

Strength of Materials and Fluid Mechanics detailed Syllabus for Automobile Engineering (DAE), C18 curriculum has been taken from the TSSBTET official website and presented for the diploma students. For Course Code, Course Name, Lectures, Tutorial, Practical/Drawing, Internal Marks, Max Marks, Total Marks, Min Marks and other information, do visit full semester subjects post given below.

For all other Diploma in Automobile Engineering (DAE) Syllabus for 4th Sem C18 Curriculum TSSBTET, do visit Diploma in Automobile Engineering (DAE) Syllabus for 4th Sem C18 Curriculum TSSBTET Subjects. The detailed Syllabus for strength of materials and fluid mechanics is as follows.

Prerequisites:

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Course Outcomes:

At the end of course student should be able to

CO : Calculate the stress and strain acting on the given material under different axial load conditions and to understand the elastic behavior of metals.
CO : Understand the concepts of fluid pressure and other properties.
CO : Assess the geometrical properties like C.G and M.I of symmetrical and non symmetrical laminas.
CO : Comprehend the basic types of fluid flows and energy possessed in a fluid flow.
CO : Draw the shear force and bending moment diagrams for the simple load system on Cantilever, Simply supported and Over hanging beams.
CO : Detail about the governing functions of hydraulic operated machines.

UNIT-1: Simple stresses and strains Periods 10 (L: 70 -T: 30)

Introduction-Load- Force – Difference between load and force- Types of loads – Mechanical properties: Strength, Stiffness, Elasticity, Plasticity, Ductility, Malleability, Toughness, Hardness, Brittleness, Creep and Fatigue – Stress, Strain – Various types of Stresses and Strains: Tensile, Compressive, Shear, Bending – Hookes law-Modulus of elasticity- Stress v/s Strain diagram- Problems on total elongation, Stress induced, Strain in bars of varying cross sections- Ultimate stress – Factor of Safety- Design or Allowable stress -Youngs modulus,- Rigidity Modulus – Bulk Modulus – Poisons ratio – Relation among three elastic constants- Problems related to three elastic constants-Thermal stresses and strains-Related problems.

UNIT-2: Properties of fluids Periods 10 (L: 70 – T: 30)

UNIT-3: Geometrical properties of sections Periods 10 (L: 60 – T: 40)

Centre of gravity of regular laminas: Square, Rectangle, Triangle and Circle – Centroid -Neutral axis-Inertia -Types of Moment of Inertias: Mass moment of Inertia, Area moment of Inertia and Polar Moment of Inertia – Application of these Moment of Inertias and formulae Definition of area Moment of Inertia or 2nd Moment of Inertia – Radius of gyration -Section modulus of Square, Rectangle, Triangle and Circle – Parallel and perpendicular axis theorems – Calculation of moment of inertia of L, I and T- sections.

UNIT-4: Flow of Fluids Periods 10(L: 60- T: 40)

Types of fluid flows: Steady and Unsteady, Uniform and Non-uniform, Laminar and Turbulent flows – Concept of Reynolds number -Continuity Equation -Assumptions made for Bernoullis theorem – Statement of Bernoullis theorem, Equation and its Practical applications – Problems on Bernoullis equation – Flow of fluid through pipes and orifice -Hydraulic coefficients – Loss of head in pipes due to friction: Darcys and Chezys formula (without proof) – Hydraulic gradient – Total energy line – Power transmitted through pipes, efficiency and condition for maximum power transmission (without derivation)- Simple problems.

UNIT-5: Shear Force and Bending Moment Periods 10(L: 60- T: 40)

UNIT-6: Hydraulics and Hydraulic Machinery Periods 10 (L: 68 – T: 32)

Basic components of hydraulic control circuit, Symbols used: Reservoir, Filter, Pump or Power source, Control elements and Actuator – Function of each basic component – Types of Filters: Edge, Surface and Depth filters- Arrangement of Filters – Types of oil pumps and their constructional details: Gear Pumps, Vane Pump – Hydraulic control valves: Direction, Pressure and flow control valves Constructional details and working principle of Hydraulic Press, Jack, Ram, Crane and Press.

Reference Books:

Strength of Materials -by R.S.Khurmi
Solid Mechanics -by Pakirappa
Strength of Materials -by Ramamrutham
Hydraulics – by R.S. Khurmi
Hydraulics &Hydraulics Machines Vol- I&II – by Jagadish Lal
Hydraulics – by Reya and Rao
Fluid Power Pneumatics -by ALAN H. JOHN
Fluid Power & Pneumatics -by AUDEL

Suggested Student Activities:

Suggested E-Learning Resources:

Simple Stresses and Strains: https://www.toppr.com/guides/physics/mechanical-properties-of-solids/stress-and-strain/
Fundamental Concepts of Fluid mechanics https://nptel.ac.in/courses/112105171/1
Fundamental Concepts of Fluid mechanics https://nptel.ac.in/courses/112105171/2
Fundamental Concepts of Fluid mechanics https://nptel.ac.in/courses/112105171/3
Geometrical Properties of sections https://nptel.ac.in/courses/112103108/15
Flow of Fluids https://nptel.ac.in/courses/112105171/1# https://nptel.ac.in/courses/112105171/2# https://nptel.ac.in/courses/112105171/3#
Shear Force and Bending Moment Diagrams https://nptel.ac.in/courses/105106172/53 https://nptel.ac.in/courses/105106172/77
Hydraulic Machinery https://www.youtube.com/watch?v=kEqPV4YUSfg
Hydraulic Press https://www.youtube.com/watch?v=AtQ1oh09Uyo
Hydraulic Ram https://www. youtube.com/watch? v=GsglThL38Mc
Hydraulic Jack https://www.youtube.com/watch?v=iXXt2oGXvmo
www.nptel.ac.in
www.wikipedia.org

For detail Syllabus of all other subjects of Automobile Engineering, C18 curriculum do visit Diploma In Automobile Engineering 4th Sem Syllabus for C18 curriculum.

For all Automobile Engineering results, visit TSSBTET DAE all semester results direct links.

InI JNTUH