For detailed syllabus of all other subjects of Diploma in Civil Engineering 5th Sem, C20 curriculum do visit DCE 5th Sem subject syllabuses for C20 regulation.

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.

In case of questions, don’t feel shy to leave a comment or leave feedback in the iStudy app for faster response.

For exam time table of Diploma in Civil Engineering (DCE), kindly visit APSBTET exam timetables.

Wishing you great luck ahead.

For Diploma in Civil Engineering 5th Sem scheme and its subjects, do visit DCE 5th Sem C20 regulation scheme. The detailed syllabus of field practices is as follows.

Chapter/Unit

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.

Course Objectives:

Upon completion of the syllabus, the student shall be able to

1. Learn the marking for earthwork, footings, basement and walls/columns of simple buildings.
2. Familiarise with the process of plastering, concreting and fixing of traps
3. Gain knowledge on the placement of reinforcement for different components of a building.

COURSE CONTENT

1. Marking for the earth work of a pillar. Marking for the earth work for the junction of two walls.
2. Marking the centre line of a one roomed building
3. Marking for the earth work of a simple two roomed building.
4. Marking for the centre line of a one room in a residential building with reference to the given point using Total Station.
5. Preparation of cement mortar with specified mix proportion by manual mixing and volumetric proportioning.
6. Construction of 230mm thick brick wall in English Bond at the corner of a Wall and check for horizontality and verticality.
7. Supervisory skills of Plastering of a wall.
8. Supervisory skills for construction of Cement Concrete Flooring. Supervisory skills of fixing of floor trap, gully trap and their connections to drain.
9. Placement of reinforcement in an Isolated Column Footing with proper cover. Positioning of shuttering to the column reinforcement.
10. Placement of reinforcement for sun shade (with specific attention of location).
11. Placement of reinforcement for stairs spanning longitudinal case (with specific attention at the junction of waist and landing slabs).
12. Placement of reinforcement for slab (with specific attention of chairs). Placement of reinforcement for a Beam column junction (with specific attention to Earth quake resistance design).

Reference Books:

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.

For detailed syllabus of all other subjects of Diploma in Civil Engineering, C20 regulation curriculum do visit DCE 5th Sem subject syllabuses for C20 regulation.

For all Diploma in Civil Engineering exam timetable, visit APSBTET DCE all semester exam timetable direct link.

For Diploma in Civil Engineering 5th Sem scheme and its subjects, do visit DCE 5th Sem C20 regulation scheme. The detailed syllabus of cad practice-ii is as follows.

Major Topics

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.

Course Objectives:

Upon completion of the Course, the student shall be able to

1. Gain the skills in drawing of different Engineering Structures using CAD software
2. Prepare the estimates for quantities of building components using MS Excel.

Culverts and Bridge Drawings

Preparation of Plan, cross sectional elevation and longitudinal sectional elevation of a. Pipe Culvert (Single Pipe)

1. R.C.C. slab culvert with square returns
2. Two-span R.C.C. T-beam bridge with square walls.

Public Health Engineering Drawings

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.

Irrigation Engineering Drawings

Preparation of Plan, cross sectional elevation and longitudinal sectional elevation of

1. Earthen bunds –

• Homogeneous
• Non Homogeneous (Zoned embankment)
1. Tank surplus weir with splayed wing walls
2. Canal drop (notch type)
3. Tank sluice with tower head.
4. Canal regulator.

tructural Engineering Drawings

1. Draw the sectional plan, elevation and cross section of built up beam showing the details of curtailment of plates and connection details.
2. Draw the details of built up column with lacing and batten system showing the details of connections by welding (plan, elevation with three systems of lacing/batten systems)
3. Draw the details of steel column base with details of gusset plate. Plan, section parallel to web, section parallel to flange showing the connections with welded joints

Ms Excel Applications in Building Estimates

Prepare the detailed estimates for various buildings from the given drawings, specifications and site conditions:

1. Compound wall and Steps
2. Single Room with Verandah (Load bearing structure)
3. Single storied Residential building with one bed room (1 BHK) (Load bearing structure)
4. Single storied Residential building with two bed rooms (2 BHK) (Load bearing structure)
5. Two storied residential building (Framed structure)
6. Reporting using MS-Word.

For detailed syllabus of all other subjects of Diploma in Civil Engineering, C20 regulation curriculum do visit DCE 5th Sem subject syllabuses for C20 regulation.

For all Diploma in Civil Engineering exam timetable, visit APSBTET DCE all semester exam timetable direct link.

For Diploma in Civil Engineering 5th Sem scheme and its subjects, do visit DCE 5th Sem C20 regulation scheme. The detailed syllabus of life skills is as follows.

Unit Title

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.

Course Objectives:

• To understand the importance of Life skills for acceptable, sustainable and ethical behaviour in academic, professional and social settings
• To exhibit language competence appropriate to acceptable social and professional behaviour.
• To demonstrate time management, stress management, team skills, problem solving ability to manage oneself in academic, professional and social settings.

For detailed syllabus of all other subjects of Diploma in Civil Engineering, C20 regulation curriculum do visit DCE 5th Sem subject syllabuses for C20 regulation.

For all Diploma in Civil Engineering exam timetable, visit APSBTET DCE all semester exam timetable direct link.

For Diploma in Civil Engineering 5th Sem scheme and its subjects, do visit DCE 5th Sem C20 regulation scheme. The detailed syllabus of structural engineering drawing is as follows.

Major Topics

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.

Course Objectives:

Upon completion of the course the student shall be able to

1. Prepare the working drawings for steel reinforcement in different RCC members and able to read and understand the given drawings.
2. Calculate Steel quantity required from the given drawings.
3. Gain knowledge on how to draw and read the different structural steel members.

Structural Planning and Marking of Frame Components

Draw the position of columns, beams, slabs, stairs and footing in a given line diagram of building – Prepare member reference scheme of Column reference scheme as per IS:696 code of practice for general engineering drawing and Grid reference scheme as per IS:5525 – recommended for detailing of reinforced concrete works and SP-34

R.C.C Drawings

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.

Reading and Interpretation of Structural Drawings

Understand the details of reinforcement from the given drawings – Fill in the details of reinforcement in a drawing.

Reference Books:

1. Designing and detailing hand book SP-34

For detailed syllabus of all other subjects of Diploma in Civil Engineering, C20 regulation curriculum do visit DCE 5th Sem subject syllabuses for C20 regulation.

For all Diploma in Civil Engineering exam timetable, visit APSBTET DCE all semester exam timetable direct link.

For Diploma in Civil Engineering 5th Sem scheme and its subjects, do visit DCE 5th Sem C20 regulation scheme. The detailed syllabus of construction management & entrepreneurship is as follows.

Major Topics

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.

Course Objectives:

Upon completion of the course the student shall be able to

1. Familiarize with the Preliminary Planning & Organizational aspects, constructional planning, contracts and tender systems.
2. Gainadequate knowledge in managing different resources in construction field and human relations and professional ethics.

1. Introduction

Definition and concept of management – need for scientific management of projects -need for attitudinal change – Scope and characteristics of construction Industry.

2. Organizational Aspects

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.

3. Management Tools

Different Management Tools – Gantt Bar chart, modified Gantt bar chart – Limitations of bar charts – Introduction CPM and PERT – advantages of CPM and PERT – terms used in CPM -formation of network – Basic rules – Problems on determination of critical path – limitations of CPM – comparison of CPM and PERT.

4. Contracts, Tenders and Arbitration

Contracts – Legality of contracts – contract document – types of contracts – piece work contracts – item rate contracts – Lump sum contracts – percentage contracts – negotiated rates – departmental execution of works – merits and limitations of each contract system -conditions of contract for civil engineering works-Tenders – Necessity of tenders – Sealed tenders – tender notice – tender documents – Earnest Money and Security Deposits -Opening of tenders – comparative statement – acceptance of tenders – work order -contract agreement – conditions of contract-Arbitration – Disputes – disputes in construction industry – arbitration – need for arbitration – arbitrator – qualifications of arbitrator – advantages of arbitration.

5. Management of Resources in Construction Industry

Materials management – Scope – Classification of common building materials based on the procurement – procedural formalities for acquisition – stages of materials managementPlant and Equipment – Need for mechanization – Optimum utilization of plant and equipment – Financial impact of mechanization – Preventive maintenance -Overhauling and replacement – Cantering, shuttering and scaffolding requirements-Financial Management -Finance as Resource – Purpose of cost control – stages of cost control – pre contract stage and post contract stage – Financial control at head office level and site level.

6. Entrepreneurship

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.

7. Human Relations and Professional Ethics

Human relations and performance in organization – Understand self and others for effective behaviour – Interpersonal relationship for effective work culture – Need for professional ethics.

Reference Books:

1. Management in construction Industry ,P.Dharwadker,Oxford& IBH Publishing Co. Pvt., Ltd.
2. Construction Management And Accounts , V.N.Vazirani& S.P. Chandola, Khanna Publishers.
3. Construction Planning and Management ,U.K. Shrivastava,Galgotia Publications Pvt. Ltd., New Delhi.
4. Construction Management and Planning ,B. Sengupta & H. Guna , Tata Mc. Graw Hill Publishing Company Ltd .
5. Construction Management and Accounts ,Harpal Singh,Tata Mc. Graw Hill Publishing Company Ltd.

For detailed syllabus of all other subjects of Diploma in Civil Engineering, C20 regulation curriculum do visit DCE 5th Sem subject syllabuses for C20 regulation.

For all Diploma in Civil Engineering exam timetable, visit APSBTET DCE all semester exam timetable direct link.

For Diploma in Civil Engineering 5th Sem scheme and its subjects, do visit DCE 5th Sem C20 regulation scheme. The detailed syllabus of quality control and safety in construction is as follows.

Major Topics

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.

Course Objectives:

Upon completion of the course, the student shall be able to

1. Understand the fundamentals of quality control in construction
2. Familiarize with the fundamentals of safety aspects and preventive measures of accidents in construction

Specifications and Standards

Specification for buildings – functional aspects of residential, commercial and industrial structures – Detailed Specifications for various items of work – preparation of detailed specification from general description – Modular Coordination – relevant IS codes -Preferred size for building components – Performance standards – Standards for industrial buildings-Management aspects of quality control – advisory organization management functions – Statutory regulations – State PWD & CPWD guide lines for field officers.

Quality Control, Statistical Analysis and Tolerance

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.

Introduction to Safety in Construction Activities

Introduction – safety against fire hazards – Fire & fire fighting – Fire rating of building materials – fire prevention standards – safety in use of construction machinery – lifting machinery, earth moving machinery and conveyors, demolition of buildings – Loading standards for buildings – The safety programme – Accident due to fall – preventive methods.

Causes of Accidents and Safety Measures

Causes of accidents – Classification of construction accidents – Cost of accidents – loss control approach in the cost of accidents – measurement of accidents – Salient features of ‘A safety programme – General safety programmes for construction – Accident report-Safety Measure for storage & handling of building materials – Safety Measure in construction of elements of building – Safety in excavation & pile driving -foundations – form work -scaffolding – roofing – safety on fragile roof – other items of work – Safety Measure in demolition of buildings – Safety Measure for hot bituminous works – Safety Measure for scaffolding, Ladders, formwork and other equipment – erection of prefabricated components and transportation – erection of steel structures – Safety measures for excavation.

Preventive Measures for Accidents

Planning for accident prevention – Evaluation of risk and loss potential in the work. Vis-a-vis cost control measures – loss control approach through accident prevention and other risk management measures for controlling losses due to personnel, legal, liability losses -property losses.

Reference Books:

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.

For detailed syllabus of all other subjects of Diploma in Civil Engineering, C20 regulation curriculum do visit DCE 5th Sem subject syllabuses for C20 regulation.

For all Diploma in Civil Engineering exam timetable, visit APSBTET DCE all semester exam timetable direct link.

For Diploma in Civil Engineering 5th Sem scheme and its subjects, do visit DCE 5th Sem C20 regulation scheme. The detailed syllabus of construction failures, repairs & maintenance is as follows.

Major Topics

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.

Course Objectives:

Upon completion of the course the student shall be able to

1. Understand the methods of identifying failures and their causes in various types of construction.
2. Learn the necessary repairs for various failures observed in construction.
3. Learn the maintenance procedures of a construction to keep it safe and durable.

1. Introduction

Definition of error, defect, and failure – Causes of failures.

2. Sub-Surface Construction Failures and Repairs

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.

3. Surface Construction Failures and Repairs

Earthen bunds – failures – slope failures and sliding – subsidence – measures to be taken to prevent surface construction failures – measures to be taken – retaining walls and abutments – geo-membranes – Revetment and pitching- Case Studies.

4. Masonry and Concrete Failures, Repairs

Wall failures – Construction error – Aging – Joints and cracks – Water tightness – Masonry cladding – Partitions – Ornamental screens – Plastering failures – repairs-Concrete failures -Improper mix design, curing, placement of reinforcement and handling of pre cast elements – shrinkage failures – expansion and plastic changes – surface disintegration due to fire -spalling of concrete – repairs- Case Studies

5. Man-Made and Natural Failures, Rehabilitation

Demolition – Deterioration – Overload – Alteration collapses – Fire – Explosion and Vibration – Collision – wind damages of towers and masts – Storm at sea – Storm on Land – Lighting damage – rain-ponding – effects – rehabilitation measures- Case Studies

6. Maintenance Problems and Their Solutions

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.

Reference Books:

1. Construction Failure ,by Jacob Feld , Kenneth L. Carper, John Wiley & Sons Publications
2. Failures & Repairs of Concrete Structures, S. Champion, John Wiley & Sons Publications
3. Engineering Structural Failures,RoltHammond,Odham Press, London
4. Learning from Failures: Deficiencies in Design, Construction and Service,R.N.Naika,R &D Centre, Structwel Designers & Consultants
5. Building Failures Diagnosis and Avoidance,W.H.Ransom,Routledge Publications
6. Maintenance Engineering for Civil Engineers,NayakB.S.,Khanna Publishers
7. Repair and Rehabilitation Of Concrete Structures,Modi I Poonam,Chirag N Patil, PHI Learning Pvt Ltd
8. Maintenance, Repair & Rehabilitation & Minor Works of Buildings,P.C.Varhese, Prentice Hall India Learning Private Limited
9. SP: 25-1987 : Causes and prevention of cracks in buildings,BIS, New Delhi

For detailed syllabus of all other subjects of Diploma in Civil Engineering, C20 regulation curriculum do visit DCE 5th Sem subject syllabuses for C20 regulation.

For all Diploma in Civil Engineering exam timetable, visit APSBTET DCE all semester exam timetable direct link.

For Diploma in Civil Engineering 5th Sem scheme and its subjects, do visit DCE 5th Sem C20 regulation scheme. The detailed syllabus of quantity surveying-ii is as follows.

Major Topics

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.

Course Objectives:

Upon completion of the course, the student shall be able to

1. Familiarize with the preparation of detailed estimate of various R.C.C. elements and calculation of quantity of steel in R.C.C. elements
2. Prepare detailed estimates of roads and culverts, irrigation and public health engineering works.
3. Learn the methods of valuation of properties and methods of rent fixation and solve simple problems.

Detailed Estimate of R.C.C. Elements:

Various components and detailed estimate of Dog legged staircase

Estimation of Quantities of Steel in R.C.C. Elements:

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.

Detailed Estimates of Roads and Culverts:

Gravel Road – Water bound macadam road – Surface dressing with bitumen – Cement concrete road – Pipe culvert – R.C.C. slab culvert with i) straight returns and ii) splayed wing walls – Different items in abstract estimate (Labour charges, Traffic diversion etc.)

Detailed Estimates of Irrigation and Public Health Engineering Works:

Open well with masonry staining – R.C.C. Rectangular/square overhead tank – Sanitary block -Tank sluice with tower head – Different items to be included in the abstract estimates of the above

Valuation of Buildings

Definition – Value, Cost and Price, Scrap value, Salvage value, Market value, Book value, sinking fund and its meaning – purpose of valuation – factors governing valuation -Depreciation – Sinking fund – Annuity – Capitalized value – Methods of valuation – Land & building method, Development method, Depreciation method, Rental method, Capitalization method, Profit method, Simple problems on each of the above method – Valuation of Apartments- Ownership concept-factors contributing the value of flat – methods of valuation of flat -comparable sale insurance method, land & building method, Investment method, Rent capitalization method – Valuation of properties of wealth tax, valuation for the purpose of capital gains tax – examples for each of these – Valuation for purpose of cost of construction -valuation for mortgage – valuation for fire insurance – Valuation by use of valuation tables

Rent Fixation

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.

Reference Books:

1. Estimating and Costing in Civil Engineering, B N Dutta, CBS Publications
2. Estimating,Costing,Specification & Valuation In Civil Engineering, by M Chakraborti, Chakraborti publishers
3. Estimating, Costing and Valuation, Rangwala, Charotar Publications
4. Civil Estimating & Costing: Including Quality Surveying, Tendering and Valuation,A.K. Upadhyay, S K Kataria and Sons Publications

For detailed syllabus of all other subjects of Diploma in Civil Engineering, C20 regulation curriculum do visit DCE 5th Sem subject syllabuses for C20 regulation.

For all Diploma in Civil Engineering exam timetable, visit APSBTET DCE all semester exam timetable direct link.

For Diploma in Civil Engineering 5th Sem scheme and its subjects, do visit DCE 5th Sem C20 regulation scheme. The detailed syllabus of steel structures is as follows.

Major Topics

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.

Course Objectives:

Upon completion of the course the student shall be able to

1. Understand the fundamentals of Limit state design of steel structures and design aspects of fillet welded joint.
2. Design tension members, compression members and flexural members by following IS Codal provisions.

Introduction and Fundamentals of Limit State Design of Steel Structures

Merits and demerits of steel structures – Loads considered in the design of steel structures as per I.S:875 -1987 – Introduction to I.S. 800-2007 – Mechanical properties of structural steel – yield stress (fy), ultimate tensile stress (fu) and maximum percent elongation (table -1 of IS:800-2007) – Standard structural sections – Classification of cross sections – class 1(plastic) class2(compact) class3(semi compact) and class4(slender) – types of elements -internal elements, outstands and tapered elements – Concept of Limit State Design – limit state of strength – limit state of serviceability – classification of actions – strength – partial safety factors for loads and materials – deflection limits.

Design of Fillet Welded Joints

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.

Design of Tension Members

Introduction – different forms of tension members – Behaviour of tension members -Different modes of failures – gross section yielding, net Section rupture and block shear failure – Maximum values of effective slenderness ratios as per code – Calculation of net effective sectional area of single angle with welded connection only – Calculation of the design strength due to yielding of gross section, rupture of critical section and block shear -problems on single angle with welded connection only – Design procedure of tension members – Problems on design of tension members single angle with welded connection only.

Analysis and Design of Compression Members, Columns and Column Basis

Introduction – different forms of compression members – Behaviour of compression members – classification of cross sections – class 1 (plastic), class2 (compact), class3 (semi compact) and class4 (slender) – Effective lengths to be used for different end conditions -table 11 of I.S:800 – Buckling class of cross section – imperfection factor and stress reduction factor for different buckling classes – column buckling curves – Maximum values of effective slenderness ratios as per code – design compressive stress for different column buckling classes – Calculation of design strength of compression members – problems – Design procedure of compression members – problems on simple sections only (no built-up sections) – Design details – effective sectional area – codal provisions for angle struts -single angle and double angle – discontinuous and continuous struts -Codal provisions of single / double lacing and battening for built-up columns (no problems) – Design of slab base along with a cement concrete pedestal, design of welded connection of base plate and column – problems.

Analysis and Design of Steel Beams

Concept of limit state design of beams – shape factor and plastic properties of beams -Problems on shape factor – Behaviour of steel beams – design strength in bending (flexure) -Factors affecting lateral stability – influence of type of loading – web buckling and web crippling – Beams failure by flexural yielding – Laterally supported beam – holes in tension zone – shear lag effects – design bending strength – lateral torsional buckling of beams -(theoretical concept only – no problems) – Effective length of compression flanges -Concept of shear in beams – resistance to shear buckling – Shear buckling design methods -simple post critical method – tension field method – Design of laterally supported simple beams with solid webs – Component parts of plate girders with sketches – brief description of different types of stiffeners – Design of laterally supported simply supported beam considering all codal requirements.

Design of Roof Trusses

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.

Reference Books:

1. IS 800-2007 -Indian Standard General construction in steel – code of practice
2. Design of Steel Structure by N Subramanian, Oxford University Press, New Delhi.
3. Limit state design of steel structures by S K Duggal, Tata McGraw Hill Education, New Delhi
4. Fundamentals of structural steel design M L Gambhir, Tata McGraw Hill Education Private Limited, New Delhi
5. Steel Structures: Design and Practice by N Subramanian,Oxford Publishers, New Delhi
6. Design of steel structure by Limit State Method as per IS 800- 2007 by Bhavikatti S S, I.K. International Publishing House, New Delhi
7. Limit state design of Steel Structure by Ramchandra & Gehlot, Scientific Publishers, Pune.
8. Teaching Resource Material : http://www.steel-insdag.org

For detailed syllabus of all other subjects of Diploma in Civil Engineering, C20 regulation curriculum do visit DCE 5th Sem subject syllabuses for C20 regulation.

For all Diploma in Civil Engineering exam timetable, visit APSBTET DCE all semester exam timetable direct link.