{"id":25241,"date":"2020-02-24T19:03:08","date_gmt":"2020-02-24T19:03:08","guid":{"rendered":"https:\/\/www.inspirenignite.com\/anna-university\/36041-basic-engineering-textile-tech-4th-sem-syllabus-for-diploma-tndte-m-scheme\/"},"modified":"2020-02-24T19:03:08","modified_gmt":"2020-02-24T19:03:08","slug":"36041-basic-engineering-textile-tech-4th-sem-syllabus-for-diploma-tndte-m-scheme","status":"publish","type":"post","link":"https:\/\/www.inspirenignite.com\/anna-university\/36041-basic-engineering-textile-tech-4th-sem-syllabus-for-diploma-tndte-m-scheme\/","title":{"rendered":"36041: Basic Engineering Textile Tech 4th Sem Syllabus for Diploma TNDTE M Scheme"},"content":{"rendered":"

Basic Engineering detail TNDTE Diploma syllabus for Textile Technology (TX), M scheme is extracted from TNDTE<\/a> official website and presented for diploma students. The course code (36041), and for exam duration, Teaching Hr\/week, Practical Hr\/week, Total Marks, internal marks, theory marks, duration and credits do visit complete sem subjects post given below. The syllabus PDFs can be downloaded from official website.<\/p>\n

For all other textile tech 4th sem syllabus for diploma m scheme tndte you can visit Textile Tech 4th Sem Syllabus for Diploma M Scheme TNDTE Subjects<\/a>. The detail syllabus for basic engineering is as follows.<\/p>\n

Rationale:<\/h4>\n

The basic fundamental idea about the Fuels, Suction and pump, Air compressors and Humidification, Air conditioning, Clutches and brakes, Transmission of motion and power, A C motors Semiconductors and different types of meter will be taught to the students. To enhance the basics of Mechanical Engineering, Electrical Engineering and Electronics Engineering\n<\/p>\n

Objectives:<\/h4>\n
    \n
  1. To have knowledge of fuel, steam, pumps, air compressor, air conditioning and bearings.<\/li>\n
  2. To know about lubrication, clutches, brakes, belts, chains, gears, lathe and welding<\/li>\n
  3. To have knowledge of fundamentals of electrical engineering, A.C motors and transformers.<\/li>\n
  4. To understand the fundamental of electronics engineering and transducers.<\/li>\n
  5. To know about measuring instruments, sensors, earthing and static electricity.<\/li>\n<\/ol>\n

    \n
    \nDetailed Content:<\/strong>\n<\/ol>\n<\/p>\n

    Unit I<\/h4>\n

    For complete syllabus and results, class timetable and more pls download iStudy Syllabus App<\/a>.<\/b> It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.<\/p>\n

    Unit II<\/h4>\n

    Basics of Mechanical Engineering -II<\/strong><\/p>\n

    \nBearings<\/strong>
    \n
    \n-Functions- Need and Importance of Bearings-Types of Bearings – Factors for Selection of Bearings – Brief study of the Construction of Ball, Roller and Needle Bearings with simple sketches.<\/p>\n

    Lubrication<\/strong>
    \n
    \n-Definition-Purpose of Lubrication- Desirable Qualities of a good Lubricant – Brief study of Continuous Lubrication Systems -Lubrication
    \nSystems like Gravity Feed Lubrication System, Pressure Feed Lubrication System and Oil bath Lubrication System –
    \nBrief study of the Lubrication Systems available in Modern Textile Machines.<\/p>\n

    Transmission of Motion and Power<\/strong>
    \n
    \n-Different types of Belt drives-Brief study of Flat belt, V belt and Gear belt drives -Merits and Demerits of the different belt drives-Application
    \nof the Belt drives in Textile Machines-Brief study of Bush Roller Chain drive and its advantages and disadvantages-Brief study
    \nof Spur, Helical, Double Helical, Bevel, Worm and Worm gear drives, Pawl and Ratchet drives – their Advantages and Disadvantages-
    \nBrief study of Cams and followers-different types of Cams and Followers – Applications of the above drives in Textile Machines.<\/p>\n

    Variable Speed drives<\/strong>
    \n
    \n-Need for Variable Speed drives in
    \nTextile machines – Study of the working of Stepless Cone Pulleys and PIV drives for changing speed.<\/p>\n

    Clutches and Brakes<\/strong>
    \n
    \n– Function of a Clutch- Principle of working of a friction clutch- Study of the Construction and working of Single plate Friction Clutch with a
    \nsimple figureFunction of a Brake-Study of working of Hydraulic brake with a simple sketch-Study of working of Pneumatic brake with a
    \nsimple sketch-Difference between a clutch and a brake.<\/p>\n

    Workshop machines<\/strong>
    \n<\/p>\n

      \n
    1. Lathe<\/B> – Study of description and functions of the parts of a Lathe with a simple line sketch-Brief study of Simple<\/li>\n

      Lathe operations – Facing, Plain turning, taper turning and drilling operations.<\/p>\n

    2. Metal joining operations<\/B>-Brief Study of Brazing – advantages of brazing -Welding – Types of Welding-Study of Oxyacetylene Gas welding – process and equipments used with a simple line sketch-Study of Electric Arc welding – process and equipments used.\t14<\/li>\n<\/ol>\n

      Unit III<\/h4>\n

      Basics of Electrical Engineering<\/strong><\/p>\n

      \nBasic Ideas<\/B> – Creation of a magnetic field around a current carrying conductor (statement only, No derivations or calculations involved) – Right Hand thumb rule -Electromagnetic Induction – Faraday’s laws of Electromagnetic Induction (statement only,
      \nNo derivations or calculations\tinvolved) – Fleming’s RH rule-Force on a current carrying conductor placed in a magnetic field (statement only, No derivations or calculations involved) – Fleming’s LH rule.<\/p>\n

      Definition of Electrical Quantities:<\/strong>
      \n
      \nVoltage, current, resistance, power and energy – Units of these quantities.<\/p>\n

      Fundamentals of Alternating Current :<\/strong>
      \n
      \n(No derivations or calculations involved) Representation of Alternating Quantities as Sinusoidal wave form-Definition of AC terms based on t
      \nhe wave form: Instantaneous and Maximum values, RMS value, Cycle, Frequency and Time Period-Idea of Phase Difference and Phase
      \nAngle- Power Factor in an AC Circuit-True Power, Apparent Power and Reactive Power- Disadvantages of low Power Factor,
      \nMethods to improve Power Factor-Three Phase AC Connections-Advantages of Three Phase Supply over Single Phase Supply-Star and
      \nDelta Connections-Properties of Star and Delta Connections-Comparison of Star and Delta Connections.<\/p>\n

      Fundamentals of Electrical Machines<\/strong>
      \n
      \n-Brief study (No derivations or calculations involved)<\/p>\n

      Induction Motors –<\/strong>
      \n
      \nPrinciple of working of 3 Phase Induction Motors – Types of InductionMotors – Necessity of Starters for starting<\/p>\n

      Induction Motors. Servo motor – Definition – uses.<\/p>\n

      Transformers-<\/strong>
      \n
      \nPrinciple of Mutual Induction-Study of the parts of a Single Phase Transformer with a simple sketch- Working principle of a Transformer (Basic idea only, no calculations) -Transformation Ratio, Step up and Step down transformers.\n<\/p>\n

      Unit IV<\/h4>\n

      For complete syllabus and results, class timetable and more pls download iStudy Syllabus App<\/a>.<\/b> It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.<\/p>\n

      Unit V<\/h4>\n

      Measuring Instruments and Sensors<\/strong>
      \n
      \n(Brief study only – No Derivations or Calculations involved)<\/p>\n

      Sensors: Brief study – Functions of Sensors – Types of Sensors-Application – Construction and Working of Temperature, Pressure, Level, Flow, Force and Humidity sensors<\/p>\n

      Earthing: Importance of Earthing – Methods of Earthing -Definition of Static charges – methods and equipments used to eliminate \/ reduce the static charges.<\/p>\n

      Measuring Instruments: Instruments used to measure Voltage, current, Power and energy- Construction and working of Voltmeter, Ammeter (moving coil and moving iron), Watt meter (dynamo meter type), Energy meter (Induction type.).\n<\/p>\n

      Text Books:<\/h4>\n
        \n
      1. Thermal Engineering\tR.Rudramoorthy\tTata Megraw Hills Educational pvt Ltd. New delhi\t2010<\/li>\n
      2. A Text Book on Hydraulics,Fluid Mechanics and Hydraulic machines\tR.S.Khurmi\tS.Chand & Co, Ram nager New Delhi- 110055\t1981<\/li>\n<\/ol>\n

        Reference Books:<\/h4>\n

        For complete syllabus and results, class timetable and more pls download iStudy Syllabus App<\/a>.<\/b> It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.<\/p>\n

        For detail syllabus of all other subjects of BE Textile Tech, M scheme do visit Textile Tech 4th Sem syllabus for M scheme<\/a>.<\/p>\n

        Dont forget to download iStudy Syllabus App<\/a> for latest syllabus and results, class timetable and more.<\/p>\n","protected":false},"excerpt":{"rendered":"

        Basic Engineering detail TNDTE Diploma syllabus for Textile Technology (TX), M scheme is extracted from TNDTE official website and presented for diploma students. The course code (36041), and for exam […]<\/p>\n","protected":false},"author":2297,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_topic_count_hidden":0,"_bbp_reply_count_hidden":0,"_bbp_forum_subforum_count":0,"footnotes":""},"categories":[47,129],"tags":[],"class_list":["post-25241","post","type-post","status-publish","format-standard","hentry","category-4th-sem","category-textile-tech-diploma"],"_links":{"self":[{"href":"https:\/\/www.inspirenignite.com\/anna-university\/wp-json\/wp\/v2\/posts\/25241","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.inspirenignite.com\/anna-university\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.inspirenignite.com\/anna-university\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.inspirenignite.com\/anna-university\/wp-json\/wp\/v2\/users\/2297"}],"replies":[{"embeddable":true,"href":"https:\/\/www.inspirenignite.com\/anna-university\/wp-json\/wp\/v2\/comments?post=25241"}],"version-history":[{"count":0,"href":"https:\/\/www.inspirenignite.com\/anna-university\/wp-json\/wp\/v2\/posts\/25241\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.inspirenignite.com\/anna-university\/wp-json\/wp\/v2\/media?parent=25241"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.inspirenignite.com\/anna-university\/wp-json\/wp\/v2\/categories?post=25241"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.inspirenignite.com\/anna-university\/wp-json\/wp\/v2\/tags?post=25241"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}