Power System Analysis Syllabus for B.Tech 5th sem is covered here. This gives the details about credits, number of hours and other details along with reference books for the course.<\/p>\n
The detailed syllabus for Power System Analysis B.Tech (R13) fifthsem is as follows<\/p>\n
OBJECTIVES:<\/strong><\/p>\n UNIT I : INTRODUCTION<\/strong> \u00a0 \u00a0 \u00a0 \u00a0 \u00a0[9 hours] UNIT II : POWER FLOW ANALYSIS<\/strong> \u00a0 \u00a0 \u00a0\u00a0[9 hours] UNIT III : FAULT ANALYSIS \u2013 BALANCED FAULTS \u00a0<\/strong> \u00a0 \u00a0\u00a0[9 hours]\n
\nNeed for system planning and operational studies \u2013 basic components of a power system.-Introduction\u00a0to restructuring – Single line diagram \u2013 per phase and per unit analysis \u2013 Generator – transformer \u2013\u00a0transmission line and load representation for different power system studies.- Primitive network –\u00a0construction of Y-bus using inspection and singular transformation methods \u2013 z-bus.<\/p>\n
\nImportance of power flow analysis in planning and operation of power systems – statement of power\u00a0flow problem – classification of buses – development of power flow model in complex variables form –\u00a0iterative solution using Gauss-Seidel method – Q-limit check for voltage controlled buses \u2013 power flow\u00a0model in polar form – iterative solution using Newton-Raphson method .<\/p>\n
\nImportance of short circuit analysis – assumptions in fault analysis – analysis using Thevenin\u2019s theorem\u00a0– Z-bus building algorithm – fault analysis using Z-bus \u2013 computations of short circuit capacity, post\u00a0fault voltage and currents.<\/p>\n