TNDTE Syllabus Robotics Diploma M Scheme

TNDTE Robotics 1st Sem Syllabus

TNDTE Robotics 2nd Sem Syllabus

TNDTE Robotics 3rd Sem Syllabus

TNDTE Robotics 4th Sem Syllabus

TNDTE Robotics 5th Sem Syllabus

TNDTE Robotics 6th Sem Syllabus

For all other details and updates about TNDTE Robotics diploma related Academic Schedule, results, time table and latest syllabus will be updated here time to time.

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App It is a lightweight, easy to use, no images, and no pdfs platform to make students’ lives easier.
.

Wish you good luck!!!

For all other subjects of the semester you can visit Robotics 6th Sem Syllabus for Diploma M Scheme TNDTE. The robotics 6th sem syllabus for diploma m scheme tndte is as follows.

Dont forget to download iStudy for latest syllabus and results, class timetable and more. Incase of questions dont hesitate to leave a comment or leave a feedback in iStudy app for faster response.

Wish you a great luck ahead.

For all other robotics 6th sem syllabus for diploma m scheme tndte you can visit Robotics 6th Sem Syllabus for Diploma M Scheme TNDTE Subjects. The detail syllabus for seminar is as follows.

Seminar

For seminar the total seminar 15 hours(15 weeks x 1hour) should be distributed equally to total theory subject per semester (i.e 15 hours divided by 3/4 subject).

A topic from subject or current scenario is given to students.

During the seminar hour students have to present the paper and submit seminar material to the respective staff member, who is handling the subject.

It should be preserved for 2 Semesters and produced to the flying squad and the inspection team at the time of inspection/verification.

For detail syllabus of all other subjects of BE Robotics, M scheme do visit Robotics 6th Sem syllabus for M scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.

For all other robotics 6th sem syllabus for diploma m scheme tndte you can visit Robotics 6th Sem Syllabus for Diploma M Scheme TNDTE Subjects. The detail syllabus for project work is as follows.

Rationale:

Minimum Marks for Pass is 50 out of which minimum 35 marks should be obtained out of 75 marks in the board Examination alone.

Project Work aims at developing innovative skills in the students whereby they apply the knowledge and skills gained through the course by undertaking a project. The individual students have different aptitudes and strengths. Project work, therefore, should match the strengths of students.

The primary emphasis of the project work is to understand and gain the knowledge of the principles of software engineering practices, so as to participate and manage a large software engineering projects in future.

Objectives:

• Implement the theoretical and practical knowledge gained through the curriculum into an application suitable for a real practical working environment preferably in an industrial environment
• Develop software packages or applications to implement the actual needs of the community.
• Get exposure on industrial environment and its work ethics.
• Understand what is entrepreneurship and how to become an entrepreneur.
• Learn and understand the gap between the technological knowledge acquired through curriculum and the actual industrial need and to compensate it by acquiring additional knowledge as required.
• Carry out cooperative learning through synchronous guided discussions within the class in key dates, asynchronous document sharing and discussions, as well as to prepare collaborative edition of the final project report.
• Expose students to the field of computing and to gain experience in software design.
• Understand and gain knowledge about disaster management.

Guidelines For Project Formulation

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

Type Of Project

As majority of the students are expected to work out a real life project in some industry/research and development laboratories/educational institutions/software companies, it is suggested that the project is to be chosen which should have some direct relevance in day-to-day activities of the candidates in his/her institution. Students are encouraged to work in the areas listed at the end. However, it is not mandatory for a student to work on a real life project. The student can formulate a project problem with the help of Guide.

Project Proposal (Synopsis)

The project proposal should be prepared in consultation with your guide during fifth semester. The project proposal should clearly state the project objectives and the environment of the proposed project to be undertaken. The project work should compulsorily include the software development. The project proposal should contain complete details in the following form:

1. Title of the Project.
2. Introduction and Objectives of the Project.
3. Project Category (DBMS/OOPS/Networking/Multimedia/Artificial Intelligence / Expert Systems etc.).
4. Tools / Platform, Hardware and Software Requirement specifications.
5. Analysis (DFDs at least up to second level , ER Diagrams/ Class Diagrams/ Database Design etc. as per the project requirements).
6. A complete structure which includes:
• Number of modules and their description to provide an estimation of the student’s effort on the project.
• Data Structures as per the project requirements for all the modules.
• Process logic of each module.
• Testing process to be used.
• Reports generation (Mention tentative content of report).
7. Are you doing this project for any Industry/Client? Mention Yes/No. If Yes, Mention the Name and Address of the Industry or Client.
8. Future scope and further enhancement of the project. Also mention limitation of the project.

Project Proposal Submission And Approval

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

Suggestive Areas Of Projectwork:

• Database Management Systems
• Software Engineering and Software Development
• Web page Designing
• Digital Image Processing
• Computer Graphics and Animation
• Multimedia Systems
• Computer Networks
• Artificial Intelligence
• Internet and e-commerce
• Computer Security and Cryptography
• Computer hardware and embedded systems
• Improving existing systems / equipments.
• Any other related area found worth.

Entrepreneurship, Environmental & Disaster Management

1. Environmental Management

Introduction – Environmental Ethics – Assessment of Socio Economic Impact -Environmental Audit – Mitigation of adverse impact on Environment – Importance of Pollution Control – Types of Industries and Industrial Pollution.

Solid waste management – Characteristics of Industrial wastes – Methods of Collection, transfer and disposal of solid wastes – Converting waste to energy – Hazardous waste management Treatment technologies.

Waste water management – Characteristics of Industrial effluents – Treatment and disposal methods – Pollution of water sources and effects on human health.

Air pollution management – Sources and effects – Dispersion of air pollutants – Air pollution control methods – Air quality management.

Noise pollution management – Effects of noise on people – Noise control methods.

2. Disaster Management

Introduction – Disasters due to natural calamities such as Earthquake, Rain, Flood, Hurricane, Cyclones etc – Man made Disasters – Crisis due to fires, accidents, strikes etc – Loss of property and life..

Disaster Mitigation measures – Causes for major disasters – Risk Identification – Hazard Zones – Selection of sites for Industries and residential buildings – Minimum distances from Sea – Orientation of Buildings – Stability of Structures – Fire escapes in buildings -Cyclone shelters – Warning systems.

Disaster Management – Preparedness, Response, Recovery – Arrangements to be made in the industries / factories and buildings – Mobilization of Emergency Services -Search and Rescue operations – First Aids – Transportation of affected people – Hospital facilities – Fire fighting arrangements – Communication systems – Restoration of Power supply – Getting assistance of neighbors / Other organizations in Recovery and Rebuilding works – Financial commitments – Compensations to be paid – Insurances -Rehabilitation.

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

List of Questions:

1. Environmentral Management

1. What is the responsibility of an Engineer-in-charge of an Industry with respect to Public Health?
2. Define Environmental Ethic.
3. How Industries play their role in polluting the environment?
4. What is the necessity of pollution control? What are all the different organizations you know, which deal with pollution control?
5. List out the different types of pollutions caused by a Chemical / Textile / Leather / Automobile / Cement factory.
6. What is meant by Hazardous waste?
7. Define Industrial waste management.
8. Differentiate between garbage, rubbish, refuse and trash based on their composition and source.
9. Explain briefly how the quantity of solid waste generated in an industry could be reduced.
10. What are the objectives of treatments of solid wastes before disposal?
11. What are the different methods of disposal of solid wastes?
12. Explain how the principle of recycling could be applied in the process of waste minimization.
13. Define the term Environmental Waste Audit’.
14. List and discuss the factors pertinent to the selection of landfill site.
15. Explain the purpose of daily cover in a sanitary landfill and state the minimum desirable depth of daily cover.
16. Describe any two methods of converting waste into energy.
17. What actions, a local body such as a municipality could take when the agency appointed for collecting and disposing the solid wastes fails to do the work continuously for number of days?
18. Write a note on Characteristics of hazardous waste.
19. What is the difference between municipal and industrial effluent ?
20. List few of the undesirable parameters / pollutants anticipated in the effluents from oil refinery industry / thermal power plants / textile industries / woolen mills / dye industries / electroplating industries / cement plants / leather industries (any two may be asked)
21. Explain briefly the process of Equalization and Neutralization of waste water of varying characteristics discharged from an Industry.
22. Explain briefly the Physical treatments Sedimentation and Floatation processes in the waste water treatment.
23. Explain briefly when and how chemical / biological treatments are given to the waste water.
24. List the four common advanced waste water treatment processes and the pollutants they remove.
25. Describe refractory organics and the method used to remove them from the effluent.
26. Explain biological nitrification and de-nitrification.
27. Describe the basic approaches to land treatment of Industrial Effluent.
28. Describe the locations for the ultimate disposal of sludge and the treatment steps needed prior to ultimate disposal.
29. List any five Industries, which act as the major sources for Hazardous Air Pollutants.
30. List out the names of any three hazardous air pollutants and their effects on human health.
31. Explain the influence of moisture, temperature and sunlight on the severity of air pollution effects on materials.
32. Differentiate between acute and chronic health effects from Air pollution.
33. Define the term Acid rain and explain how it occurs.
34. Discuss briefly the causes for global warming and its consequences
35. Suggest suitable Air pollution control devices for a few pollutants and sources.
36. Explain how evaporative emissions and exhaust emissions are commonly controlled.
37. What are the harmful elements present in the automobile smokes? How their presence could be controlled?
38. What is the Advantage of Ozone layer in the atmosphere? State few reasons for its destruction.
39. Explain the mechanism by which hearing damage occurs.
40. List any five effects of noise other than hearing damage.
41. Explain why impulsive noise is more dangerous than steady state noise.
42. Explain briefly the Source – Path – Receiver concept of Noise control.
43. Where silencers or mufflers are used ? Explain how they reduce the noise.
44. Describe two techniques to protect the receiver from hearing loss when design / redress for noise control fail.
45. What are the problems faced by the people residing along the side of a railway track and near to an Airport? What provisions could be made in their houses to reduce the problem?

2. Disaster Management

1. What is meant by Disaster Management? What are the different stages of Disaster management?
2. Differentiate Natural Disasters and Man made Disasters with examples.
3. Describe the necessity of Risk identification and Assessment Surveys while planning a project.
4. What is Disasters recovery and what does it mean to an Industry?
5. What are the factors to be considered while planning the rebuilding works after a major disaster due to flood / cyclone / earthquake? (Any one may be asked)
6. List out the public emergency services available in the state, which could be approached for help during a natural disaster.
7. Specify the role played by an Engineer in the process of Disaster management.
8. What is the cause for Earthquakes? How they are measured? Which parts of India are more vulnerable for frequent earthquakes?
9. What was the cause for the Tsunami 2004 which inflicted heavy loss to life and property along the coast of Tamilnadu ? Specify its epicenter and magnitude.
10. Specify the Earthquake Hazard Zones in which the following towns of Tamilnadue:
1. Chennai
2. Nagapattinam
3. Coimbatore
4. Madurai
5. Salem.
11. Which parts of India are experiencing frequent natural calamities such as
1. heavy rain fall
2. huge losses due to floods
3. severe cyclones
12. Define basic wind speed. What will be the peak wind speed in
1. Very high damage risk zone – A,
2. High damage risk zone,
3. Low damage risk zone.
13. Specify the minimum distance from the Sea shore and minimum height above the mean sea level, desirable for the location of buildings.
14. Explain how the topography of the site plays a role in the disasters caused by floods and cyclones.
15. Explain how the shape and orientation of buildings could reduce the damages due to cyclones.
16. What is a cyclone shelter ? When and where it is provided? What are its requirements ?
17. What Precautionary measures have to be taken by the authorities before opening a dam for discharging the excess water into a canal/river ?
18. What are the causes for fire accidents ? Specify the remedial measures to be taken in buildings to avoid fire accidents.
19. What is a fire escape in multistoried buildings ? What are its requirements ?
20. How the imamates of a multistory building are to be evacuted in the event of a fire/Chemical spill/Toxic Air Situation/ Terrorist attack, (any one may be asked).
21. Describe different fire fighting arrangements to be provided in an Industry.
22. Explain the necessity of disaster warning systems in Industries.
23. Explain how rescue operations have to be carried out in the case of collapse of buildings due to earthquake / blast / Cyclone / flood.
24. What are the necessary steps to be taken to avoid dangerous epidemics after a flood disaster?
25. What relief works that have to be carried out to save the lives of workers when the factory area is suddenly affected by a dangerous gas leak / sudden flooding?
26. What are the difficulties faced by an Industry when there is a sudden power failure? How such a situation could be managed?
27. What are the difficulties faced by the Management when there is a group clash between the workers? How such a situation could be managed?
28. What will be the problems faced by the management of an Industry when a worker dies because of the failure of a mechanical device due to poor maintenance? How to manage such a situation ?
29. What precautionary measures have to be taken to avoid accidents to labourers in the Industry in a workshop / during handling of dangerous Chemicals / during construction of buildings / during the building maintenance works.
30. Explain the necessity of medical care facilities in an Industry / Project site.
31. Explain the necessity of proper training to the employees of Industries dealing with hazardous products, to act during disasters.
32. What type of disaster is expected in coal mines, cotton mills, Oil refineries, ship yards and gas plants?
33. What is meant by Emergency Plan Rehearsal? What are the advantages of such Rehearsals?
34. What action you will take when your employees could not reach the factory site because of continuous strike by Public Transport workers?
35. What immediate actions you will initiate when the quarters of your factory workers are suddenly flooded due to the breach in a nearly lake / dam, during heavy rain?
36. What steps you will take to avoid a break down when the workers union of your Industry have given a strike notice?
37. List out few possible crisis in an organization caused by its workers? What could be the part of the middle level officials in managing such crisis?
38. What types of warning systems are available to alert the people in the case of predicted disasters, such as floods, cyclone etc.
39. Explain the necessity of Team work in the crisis management in an Industry / Local body.
40. What factors are to be considered while fixing compensation to the workers in the case of severe accidents causing disability / death to them?
41. Explain the legal / financial problems the management has to face if safely measures taken by them are found to be in adequate.
42. Describe the importance of insurance to men and machinery of an Industry dealing with dangerous jobs.
43. What precautions have to be taken while storing explosives in a match/ fire crackers factory?
44. What are the arrangements required for emergency rescue works in the case of Atomic Power Plants?
45. Why residential quarters are not constructed nearer to Atomic Power Plants?

For detail syllabus of all other subjects of BE Robotics, M scheme do visit Robotics 6th Sem syllabus for M scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.

For all other robotics 6th sem syllabus for diploma m scheme tndte you can visit Robotics 6th Sem Syllabus for Diploma M Scheme TNDTE Subjects. The detail syllabus for cad practical is as follows.

Rationale:

Objectives:

• Understand the types of sections and sectional views
• Understand limits, fits and Tolerances
• Explain the use of threaded fasteners and the types of threads
• Select different types of fits and tolerances for various mating parts
• Draw assembled drawings of various joints and couplings using CAD
• Draw assembled drawings of various types of machine elements using CAD.

Cad Practical

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

Equipment Requirements

1. Computer 30 Nos
2. Software: Cad Software

Question paper pattern:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

For detail syllabus of all other subjects of BE Robotics, M scheme do visit Robotics 6th Sem syllabus for M scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.

For all other robotics 6th sem syllabus for diploma m scheme tndte you can visit Robotics 6th Sem Syllabus for Diploma M Scheme TNDTE Subjects. The detail syllabus for robotics practical is as follows.

Rationale:

Objectives:

• Identify different part of robot
• Record positions using Cartesian co ordinate and joint co ordinates
• Write programmers for pick and place
• Operate and control robot through teach pendant
• Operate and control robot through programming
• Study and use vision system in robot application

List Of Exercises:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

Equipment Requirements

1. Robot Off Line Simulation Software 10 Users
2. Six Axis Robot 1
3. Computers 10
4. Transducers/Photo Sensor 2

Question paper pattern:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

For detail syllabus of all other subjects of BE Robotics, M scheme do visit Robotics 6th Sem syllabus for M scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.

For all other robotics 6th sem syllabus for diploma m scheme tndte you can visit Robotics 6th Sem Syllabus for Diploma M Scheme TNDTE Subjects. The detail syllabus for process control practical is as follows.

Rationale:

Objectives:

• Study the basic concepts of instrumentation
• Categories the different types of sensors and transducer.
• Explain the signal conditioning.
• Explain the working of recorder
• Explain the measurement technique of strain,force,Torque and power.
• Explain the measurement technique of pressure ,temperature and flow.

List of Experiments:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

Equipment Requirements

1. On-Off Level Process 2
2. On-Off Pressure Process 2
3. Temperature Process 2
4. Lvdt Trainer Modul 2
5. Rtd Trainer Modul 2
6. Pid Controller 2
7. Thermister Trainer Modul 2
8. Control Valve Trainer Kit 2
9. Thermocuple 2

Question paper pattern:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

For detail syllabus of all other subjects of BE Robotics, M scheme do visit Robotics 6th Sem syllabus for M scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.

For all other robotics 6th sem syllabus for diploma m scheme tndte you can visit Robotics 6th Sem Syllabus for Diploma M Scheme TNDTE Subjects. The detail syllabus for robotics is as follows.

Rationale:

In Recent days robots are used in automation industries. Knowledge & Familiarization of robots will be considered as an added advantage in the field of Automation.

Objectives:

• Explain different components of robot
• compare various types of Robot
• Study the working of various robot controller.
• Differentiate various robot controller.
• Explain the kinematics of robot.
• Explain the working of vision system
• Appreciate the application of robot s in various industries.
• Compare the uses of various sensors & warning system

Unit 1

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

Unit 2

Robot Controller, Servo Systems

Robot controller – level of controller – open loop and closed loop controller -servo systems — robot path control – point to point – continuous path control – sensor based path control – controller programming – actuators -dc servo motors – stepper motors – hydraulic and pneumatic drives -feedback devices – potentiometers – optical encoders – dc tachometers.

Unit 3

Robot Motion Analysis and Vision System

Robot motion analysis – robot kinematics – robot dynamics – end effectors -grippers and tools – gripper design – mechanical gripper – vacuum gripper -magnetic grippers – sensors – transducers – tactile sensors -proximity sensors and range sensors – force and moment sensors and its applications and problems photoelectric sensors – vision system – image processing and analysis -robotic applications – robot operation aids – teach pendent – MDI and computer control 14

Unit 4

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

Unit 5

Robot Application in Manufacturing

Robot application in manufacturing – material handling -assembly finishing -adopting robots to work station – requisite and non – requisite robot characteristics -stages in selecting robot for individual application -precaution for robot -future of robotics. Economics analysis for robotics – cost data required for the analysis -methods of economic analysis – pay back method – equivalent uniform annual cost method – return on investment method. 14

Text Books:

1. Mikkel P.Groover, Mite chell weiss, Rogern Negal and Nicholes G.Odress, Industrial Robotics Technology- Programming and Applications
2. R.K.Mittal, I.J.Nagrath, Robotics and controls, Tata Mcgraw Hill Education Pvt.

Reference Books:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

For detail syllabus of all other subjects of BE Robotics, M scheme do visit Robotics 6th Sem syllabus for M scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.

For all other robotics 6th sem syllabus for diploma m scheme tndte you can visit Robotics 6th Sem Syllabus for Diploma M Scheme TNDTE Subjects. The detail syllabus for process control is as follows.

Rationale:

In process industries, controllers are used in controlling temperature, pressure, flow, liquid level, and other process variables. This is provided to get necessary knowledge that may help the students getting employed in process industries.

Objectives:

• Study the basic concepts of instrumentation.
• Compare the different types of sensors and transducers
• Explain the signal conditioning.
• Explain the working of digital display unit.
• Explain the functioning of recorders.
• Explain the measurement technique of strain, force torque and power.
• Explain the measurement technique of pressure, temperature and flow

Unit 1

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

Unit 2

Controller Principles

Controller – Block diagram, Types, General properties – Reverse and Direct action, Controller modes – Discontinuous – On – Off Control with differential gap, without differential gap – Neutral zone-Continuous – Proportional controller – Proportional band (PB) – Effect of PB on a controller output – Offset -Integral control – PI – PD – PID – Definition, salient features, applications and limitations of the above controllers -Selection of control action – Electronic controllers – Error detector -Two position controller – P,I,D,PI,PD, PID controllers -reverse action -pneumatic controllers – Flapper – Nozzle mechanism, Pneumatic relay. 14

Unit 3

Tuning Of Controllers

Concept of tuning – Criteria for controller tuning – Quarter decay ratio, IAE, ISE,ITAE – Methods of tuning – Open loop response method -Process reaction curve -Closed loop response method – Ultimate cycle method, Damped oscillation method. 14

Unit 4

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

Unit 5

Complex Control Systems

Cascade control system, Ratio control systems, feed forward control system, Comparison of feedback control system and feed forward control system. (One specific application for each of the above systems) – Introduction DCS and SCADA Block Diagram of Fuzzy logic controller – block diagram – typical application-washing machine 14

Text Books:

1. Donald P Eckman, Process control,Wiely Eastern limited,1991
2. Peter Hariot, Process control,TataMcgraw Hill.
3. B. SankaraGomathi, Process control (Principles and applications), J J Publications, 1981.

Reference Books:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

For detail syllabus of all other subjects of BE Robotics, M scheme do visit Robotics 6th Sem syllabus for M scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.

For all other robotics 6th sem syllabus for diploma m scheme tndte you can visit Robotics 6th Sem Syllabus for Diploma M Scheme TNDTE Subjects. The detail syllabus for industrial engineering and management is as follows.

Rationale:

In the Indian Economy ,Industries and enterprises always find prominent place . After globalization , the government of India has announced liberalization policy of starting enterprises . Student must be trained not only in manufacturing process but also in managing activities of industries. Student must be trained to work as a good Manager. The knowledge about plant, safety, work study techniques, personnel Management and financial management will definitely mould the students as managers to the industries.

Objectives:

• To study the different types of Layout.
• To study the safety aspects and its impacts on an organization
• To study different work measurement techniques.
• To study production planning and control and its functions.
• To study basic and modern management techniques.
• To study the staff selection procedure and training of them.
• To study capital and resources of capital.
• To study inventory control system.
• To study about organization and its behavior.

Unit 1

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

Unit 2

Work Study, Method Study And Work Measurement

Work Study: Productivity – Standard of living – method of improving productivity – Objectives – Importance of good working conditions. Method Study: Definition – Objectives – Selection of a job for method study – Basic procedure for conduct of method study – Tools used -Operation process chart, Flow process chart, two handed process chart, Man machine chart, String diagram and flow diagram. Work Measurement: Definition – Basic procedure in making a time study – Employees rating factor – Application of time allowances – Rest, Personal, Process , Special and Policy allowances – Calculation of standard time – Problems – Basic concept of production study -Techniques of work measurement. Ratio Delay study ,Synthesis from standard data , Analytical estimating and Pre determined Motion Time System(PMTS. 16

Unit 3

Production Planning And Quality Control

Production Planning and Control: Introduction – Major functions of production planning and control – Pre planning – Methods of fore casting – Routing and scheduling – Dispatching and controlling -Concept of Critical path method (CPM) – Description only. Production – types -Mass Production, batch Production and job order production – Characteristics – Economic Batch Quantity (EBQ) – Principles of product and process planning – make or buy decision. Quality Control: Definition – Objectives – Types of inspection – First piece, Floor and centralized inspection – Advantages and disadvantages. Quality control – Statistical quality control – Types of measurements -Method of variables – Method of attributes – Uses of X, R, p, and c Charts – Operating Characteristics curve (O.C curve) – Sampling inspection – Single and double sampling plan – Concept of ISO:9001:2008 Quality Management System Registration Certification Procedure – Benefits of ISO to the Organization. 16

Unit 4

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

Unit 5

Financial Management, Material Management

Financial Management: Fixed and working capital – Resources of capital – Shares preference and equity shares – debentures – Type of debentures – Public deposits, Factory costing – Direct cost – Indirect cost – Factory overhead – Selling price of a product – Profit – Problems. Depreciation – Causes – Methods – Straight line, Sinking fund and percentage on diminishing value method – Problems. Material Management: Objectives of good stock control system – ABC analysis of inventory – Procurement and consumption cycle – Minimum stock, Lead time, Reorder Level – Economic order quantity problems -Supply chain management – Introduction – Purchasing procedure -Store keeping – Bin card. 16

Text Books:

1. Industrial Engineering and Management, O.P Khanna Revised Edition Publications (P) Ltd., -2004 67/4 Madras House, Daryaganj, New delhi 110002.
2. Engineering Economics and Management, T. R. Banga & S. C. Sharma, McGraw Hill Edition -2 2001, New Delhi.
3. Herald Koontz and Heina weihrich, Essentials of Mangement, Mcgraw hill Publishing company, Singapore International Edition Latest

Reference Books:

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

For detail syllabus of all other subjects of BE Robotics, M scheme do visit Robotics 6th Sem syllabus for M scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.