Download the iStudy App for all syllabus and other updates.

For detailed syllabus of all the other subjects of Production 6th Sem, 2021 curriculum do visit Production 6th Sem subject syllabuses for 2021 regulation. For Production Engineering 6th Sem semesters scheme and subjects, refer to Production 6th Sem 2021 regulation scheme. The scheme details of Professional Elective-VI for Production 6th Sem is as follows.

Don’t forget to download iStudy App for the latest syllabus, results, class timetable and many more features. In case of questions, don’t feel shy to leave a comment or leave feedback in the iStudy app for faster response.

For the results of Production Engineering 6th Sem, kindly visit Production 6th Sem direct results link.

For exam time table of Production Engineering (Production), kindly visit Anna University exam timetables.

For Production Engineering (Production) notices, kindly visit Anna University notices.

Download the iStudy App for all syllabus and other updates.

For updated syllabus of Production Engineering (Production) 2021, kindly visit Production updated syllabus.

Wishing you great luck ahead.

For Production Engineering 6th Sem scheme and its subjects, do visit Production 6th Sem 2021 regulation scheme. For Professional Elective-VI scheme and its subjects refer to Production Professional Elective-VI syllabus scheme. The detailed syllabus of machine design is as follows.

Course Objectives:

Download the iStudy App for all syllabus and other updates.

Unit I

INTRODUCTION 9 Fundamentals of Machine Design-Engineering Design, Phases of Design, Design Consideration -Standards and Codes – Selection of Materials -Design against Static and Dynamic Load -Modes of Failure, Factor of Safety, Principal Stresses, Theories of Failure-Stress Concentration, Stress Concentration Factors, Variable Stress, Fatigue Failure, Endurance Limit, Design for Finite and Infinite Life, Soderberg and Goodman Criteria.

Unit II

Download the iStudy App for all syllabus and other updates.

Unit III

SHAFTS AND COUPLING 9 Design of Shaft -For Static and Varying Loads, For Strength and Rigidity-Design of CouplingTypes, Flange, Muff and Flexible Rubber Bushed Coupling.

Unit IV

Download the iStudy App for all syllabus and other updates.

Unit V

SPRINGS AND BEARINGS 9 Design of Helical Spring-Types, Materials, Static and Variable Loads-Design of Leaf SpringDesign of Journal Bearing -Antifriction Bearing-Types, Life of Bearing, Reliability Consideration, Selection of Ball and Roller Bearings.
Note: (Use of PSG Design Data Book is permitted in the University examination)

Course Outcomes:

Download the iStudy App for all syllabus and other updates.

Text Books:

1. Jindal U. C., Machine Design, Pearson, 2010.
2. Joseph Edward Shigley, Charles R. Mischke Mechanical Engineering Design, McGraw Hill, International Edition, 1992.
3. Sharma. C.S. and Kamlesh Purohit, Design of Machine Elements, Prentice Hall of India Private Limited, 2003.

Reference Books:

1. Bhandari. V.B., Design of Machine Elements, Tata McGraw-Hill Publishing Company Limited,2003.
2. Robert L.Norton, Machin Design – An Integrated Approach, Prentice Hall International Edition,2000.

For detailed syllabus of all the other subjects of Production Engineering 6th Sem, visit Production 6th Sem subject syllabuses for 2021 regulation.

For all Production Engineering results, visit Anna University Production all semester results direct link.

For Production Engineering 6th Sem scheme and its subjects, do visit Production 6th Sem 2021 regulation scheme. For Professional Elective-VI scheme and its subjects refer to Production Professional Elective-VI syllabus scheme. The detailed syllabus of cnc machining technology is as follows.

Course Objectives:

Download the iStudy App for all syllabus and other updates.

Unit I

FUNDAMENTALS OF COMPUTER GRAPHICS 9 Product cycle- Design process- sequential and concurrent engineering- Computer aided design CAD system architecture- Computer graphics co-ordinate systems- 2D and 3D transformations homogeneous coordinates – Line drawing -Clipping- viewing transformation

Unit II

Download the iStudy App for all syllabus and other updates.

Unit III

CNC MACHINES 9 NC, CNC & DNC – types of CNC – constructional features – drives and control systems -feedback devices – Interchangeable tooling system – preset & qualified tools – ISO specification – Machining center – Turning center – CNC EDM- CNC wire cut EDM.

Unit IV

Download the iStudy App for all syllabus and other updates.

Unit V

FUNDAMENTALS OF CAM 9 Brief introduction to CAM – Manufacturing Planning, Manufacturing control- Concurrent Engineering-CIM concepts – Computerized elements of CIM system -Types of production -Basic Elements of an Automated system – Levels of Automation – Lean Production and JustIn-Time Production

Course Outcomes:

Download the iStudy App for all syllabus and other updates.

Text Books:

1. Nagpal G.R., “Machine Tool Engineering”, Khanna Publishers, 2002
2. Ibrahim Zeid Mastering CAD CAM Tata McGraw-Hill Publishing Co.2007

Reference Books:

1. Groover.M.P., “Automation, production systems and computer integrated manufacturing”, Prentice Hall, 2008
2. Mike Mattson., CNC Programming Principles and Applications, 2nd Edition, Delmar Cengage learning, United States, 2010, ISBN: 9781418060992.
3. Radhakrishnan P., Computer Numerical Control Machines and Computer Aided Manufacturing, New Age International Publishers., United States, 2018, ISBN-13: 9788122433975.
4. Rao P.N., CAD/CAM Principles and Applications, 3rd Edition, Tata McGraw, Hill Publishing Company Limited, New Delhi, 2010, ISBN-13: 978-0070681934.
5. Smid P., CNC Programming Hand book, 3rd Edition, Industrial Press Inc., United States, 2008, ISBN-13: 978-0831133474.

For detailed syllabus of all the other subjects of Production Engineering 6th Sem, visit Production 6th Sem subject syllabuses for 2021 regulation.

For all Production Engineering results, visit Anna University Production all semester results direct link.

For Production Engineering 6th Sem scheme and its subjects, do visit Production 6th Sem 2021 regulation scheme. For Professional Elective-VI scheme and its subjects refer to Production Professional Elective-VI syllabus scheme. The detailed syllabus of quality control and reliability engineering is as follows.

Course Objectives:

Download the iStudy App for all syllabus and other updates.

Unit I

STATISTICAL PROCESS CONTROL 9 Quality control – Definition – Quality Assurance Variation in process – Factors – control charts -variables XR and Xo, – Attributes P, C and U-Chart Establishing and interpreting control charts process capability – Quality rating – Short run SPC.

Unit II

Download the iStudy App for all syllabus and other updates.

Unit III

EXPERIMENTAL DESIGN AND TAGUCHI METHOD 9 Fundamentals – fractional, factorial experiments – random design, Latin square design – Taguchi method -Quality Loss function – experiments – S/N ratio and performance measure – Orthogonal array.

Unit IV

Download the iStudy App for all syllabus and other updates.

Unit V

FAILURE DATA ANALYSIS 9 Real time distribution, exponential, normal, log normal, gamma and Weibull – reliability data requirements – Graphical evaluation.

Course Outcomes:

Download the iStudy App for all syllabus and other updates.

Text Books:

1. Modares, Reliability and Risk Analysis, Marcel Decker Inc. 4th edition 2014.
2. Besterfield D.H., Quality Control, Prentice Hall, 3rd edition 2011.

Reference Books:

1. Amitava Mitra, Fundamentals of Quality Control and Improvement, Pearson Education Asia, Delhi 2002.
2. Manohar Mahajan, Statistical Quality Control, Dhanpat Rai and Sons, 2007.
3. Sharma S.C., Inspection Quality Control and Reliability, Khanna Publishers, 1998.

For detailed syllabus of all the other subjects of Production Engineering 6th Sem, visit Production 6th Sem subject syllabuses for 2021 regulation.

For all Production Engineering results, visit Anna University Production all semester results direct link.

For Production Engineering 6th Sem scheme and its subjects, do visit Production 6th Sem 2021 regulation scheme. For Professional Elective-VI scheme and its subjects refer to Production Professional Elective-VI syllabus scheme. The detailed syllabus of finite element analysis is as follows.

Course Objectives:

Download the iStudy App for all syllabus and other updates.

Unit I

INTRODUCTION 9 Engineering design analysis. Basic concepts of FEM. Steps in FEM. Advantages and limitations of FEM. Handling of simultaneous equations – Gaussian elimination method – Gaussian Jordan method. Numerical integration. Commercial FEM packages.

Unit II

Download the iStudy App for all syllabus and other updates.

Unit III

CONTINUUM ELEMENTS 9 Plane stress, Plane strain and axisymmetric problems, constant and linear strain, triangular elements, stiffness matrix, axisymmetric load vector. Computer codes for CST and LST elements.

Unit IV

Download the iStudy App for all syllabus and other updates.

Unit V

MODAL ANALYSIS 9 Equations of motion for vibration problems. Consistent and lumped mass matrices. Formulation of element mass matrices. Free vibration problem formulation. Case study – FEM in structural analysis, heat transfer and fluid flow problems with respect to Automotive industries.

Course Outcomes:

Download the iStudy App for all syllabus and other updates.

Text Books:

1. Daryl L Logan, “A First Course in the Finite Element Method”, 5th Edition, CL Engineering, 2010
2. David V Hutton, “Fundamentals of finite element analysis”, 1st Edition, McGraw Hill Education, 2004
3. Singiresu S. Rao, “The Finite Element Method in Engineering”, Fifth Edition, Butterworth Heinemann, 2010.

Reference Books:

1. Bathe, K.J. and Wilson, E.L., Numerical Methods in Finite Elements Analysis, Prentice Hall of India, 1985.
2. Krishnamurthy, C.S., Finite Element Analysis, Tata McGraw Hill, 2000.
3. Reddy J.N., An Introduction to Finite Element Method, Third edition, McGraw Hill, 2000.
4. Robert D. Cook, David S. Malkus, Michael E. Plesha, Robert J. Witt, “Concepts and Applications of Finite Element Analysis”, 4th Edition, John Wiley and Sons, Inc., 2001.
5. Tirupathi.R. Chandrapatha and Ashok D. Belegundu – Introduction to Finite Elements in Engineering – Printice Hall India, Third Edition, 2003.

For detailed syllabus of all the other subjects of Production Engineering 6th Sem, visit Production 6th Sem subject syllabuses for 2021 regulation.

For all Production Engineering results, visit Anna University Production all semester results direct link.

For Production Engineering 6th Sem scheme and its subjects, do visit Production 6th Sem 2021 regulation scheme. For Professional Elective-VI scheme and its subjects refer to Production Professional Elective-VI syllabus scheme. The detailed syllabus of processing of composites is as follows.

Course Objectives:

Download the iStudy App for all syllabus and other updates.

Unit I

COMPOSITES 9 Definition and fundamentals of composites- need for composites – enhancement of properties – Reinforcement, classification, general characteristics, rule of mixture – Theory of composites – Mechanical behavior – Stress strain relationships. Applications of various types of composites.

Unit II

Download the iStudy App for all syllabus and other updates.

Unit III

POLYMER MATRIX COMPOSITES 9 Open mould process, bag moulding, Hand layup and spray up techniques filament winding, compression and transfer moulding, BMC and SMC- pultrusion – centrifugal casting – injection moulding – structure, properties and application of PMCs – Carbon Matrix Composites -Interfaces.

Unit IV

Download the iStudy App for all syllabus and other updates.

Unit V

CERAMIC MATRIX COMPOSITES 9 Ceramic matrix materials – Processing – Hot pressing, liquid infiltration techniques lanxide process, Insitu, solgel, chemical reaction techniques – CVD, CVI process. Interface in CMCs. Thermal shock resistance. Applications.

Course Outcomes:

Download the iStudy App for all syllabus and other updates.

Text Books:

1. Krishan K Chawla, Composite materials: science and engineering, Fourth Edition, Springer, 2019.
2. Mallick. P.K., “Fiber-Reinforced Composites: Materials, Manufacturing, and Design”, Third Edition, CRC Press, Taylor & Francis group, 3rd edition, 2007.

Reference Books:

1. Kenneth,Budinski.G and Michael K. Budinski, Engineering Materials, Prentice Hall of India pvt ltd., 9th Indian reprint, 2009.
2. Mathews F.L. and Rawlings R.D., Composite materials, Engineering and Science, Chapman. Woodhead Publishing, 1999.
3. Strong. B, Fundamentals of composite manufacturing, SME, 2008
4. Sharma. S.C, Composite materials, Narosa publications, 2004 – reprint.
5. Weatherhead R.G. FRP technology (Fibre Reinforced Resin System), AppliedScience Publishers Limited, London, 2012

For detailed syllabus of all the other subjects of Production Engineering 6th Sem, visit Production 6th Sem subject syllabuses for 2021 regulation.

For all Production Engineering results, visit Anna University Production all semester results direct link.

For Production Engineering 6th Sem scheme and its subjects, do visit Production 6th Sem 2021 regulation scheme. For Professional Elective-VI scheme and its subjects refer to Production Professional Elective-VI syllabus scheme. The detailed syllabus of computer aided product design is as follows.

Course Objectives:

Download the iStudy App for all syllabus and other updates.

Unit I

INTRODUCTION TO COMPUTER AIDED DESIGN 9 Introduction to Engineering Design – Various phases of systematic design – sequential engineering and concurrent engineering – Computer hardware and Peripherals – software packages for design and drafting.

Unit II

Download the iStudy App for all syllabus and other updates.

Unit III

GEOMETRIC MODELING 9 Geometric Modeling – types – Wire frame surface and solid modeling – Boundary Representation, constructive solid geometry – Graphics standards – assembly modeling – use of software packages.

Unit IV

Download the iStudy App for all syllabus and other updates.

Unit V

PRODUCT DATA MANAGEMENT 9 Product Data Management – concepts – Collaborative product design and commerce -Information Acquisition – Sourcing factor – manufacturing planning factor – Customization factor -Product life cycle management.

Course Outcomes:

Download the iStudy App for all syllabus and other updates.

Text Books:

1. Kevin Otto, Kristin Wood, Product Design, Pearson Education, 7th Reprint , 2011.
2. Ibrahim Zeid, CAD/CAM theory and Practice, Tata McGraw Hill, 2nd edition, 2008.

Reference Books:

1. Biren Prasad, Concurrent Engineering Fundamentals Vol.II, Prentice Hall, 1st edition,2007.
2. James G.Bralla, Handbook of Product Design for Manufacturing, McGraw Hill, 2nd edition,2004
3. David F.Rogers.J, Alan Adams, Mathematical Elements for Computer Graphics, McGraw Hill, 2nd edition, 2009.

For detailed syllabus of all the other subjects of Production Engineering 6th Sem, visit Production 6th Sem subject syllabuses for 2021 regulation.

For all Production Engineering results, visit Anna University Production all semester results direct link.

For Production Engineering 6th Sem scheme and its subjects, do visit Production 6th Sem 2021 regulation scheme. For Professional Elective-VI scheme and its subjects refer to Production Professional Elective-VI syllabus scheme. The detailed syllabus of surface modifications and analytical techniques is as follows.

Course Objectives:

Download the iStudy App for all syllabus and other updates.

Unit I

CORROSION AND ITS CONTROL 9 Introduction- chemical and electrochemical corrosions- mechanism of electrochemical and galvanic corrosions- concentration cell corrosion- passivity- soil, pitting, inter-granular, water line, stress and microbiological corrosions- galvanic series- factors influencing corrosion -measurement of corrosion rate. Corrosion control – material selection and design -electrochemical protection – sacrificial anodic protection and impressed current cathodic protection.

Unit II

Download the iStudy App for all syllabus and other updates.

Unit III

METALLIC COATINGS 9 Definition – methods of metallic coating, hot dipping – galvanizing, tinning, metal cladding, electroplating, electroless plating. Various other metallic coatings – displacement plating-Kanigen process – metal spraying or metallised coating – cementation or diffusion coatings.

Unit IV

Download the iStudy App for all syllabus and other updates.

Unit V

SURFACE CHARACTERIZATION 9 Surface-Interface-Bulk-Definition, – Principle- instrumentation- block diagram-data analysis and applications of Scanning Electron Microscopy (SEM) and Transmission electron microscopy (TEM)- Atomic Force Microscopy (AFM), Surface Analysis by Brunauer-Emmett-Teller (BET) Method -X-Ray Photoelectron Spectroscopy, Surface coating thickness measurements (thin and thick -Profilometry).

Course Outcomes:

Download the iStudy App for all syllabus and other updates.

Text Books:

1. Kannan P., Ravikrishnan A., Engineering Chemistry, Sri Krishna Hitech Publishing Company Pvt. Ltd. Chennai, 2014.
2. Jain P.C. & Monica Jain., Engineering Chemistry, Dhanpat Rai Publishing Company (P) Ltd, New Delhi, 2014.

Reference Books:

1. Dara S.S, Umare S.S. Engineering Chemistry, S. Chand & Company Ltd., New Delhi, 2014.

For detailed syllabus of all the other subjects of Production Engineering 6th Sem, visit Production 6th Sem subject syllabuses for 2021 regulation.

For all Production Engineering results, visit Anna University Production all semester results direct link.

Download the iStudy App for all syllabus and other updates.

For detailed syllabus of all the other subjects of Production 6th Sem, 2021 curriculum do visit Production 6th Sem subject syllabuses for 2021 regulation. For Production Engineering 6th Sem semesters scheme and subjects, refer to Production 6th Sem 2021 regulation scheme. The scheme details of Professional Elective-V for Production 6th Sem is as follows.

Don’t forget to download iStudy App for the latest syllabus, results, class timetable and many more features. In case of questions, don’t feel shy to leave a comment or leave feedback in the iStudy app for faster response.

For the results of Production Engineering 6th Sem, kindly visit Production 6th Sem direct results link.

For exam time table of Production Engineering (Production), kindly visit Anna University exam timetables.

For Production Engineering (Production) notices, kindly visit Anna University notices.

Download the iStudy App for all syllabus and other updates.

For updated syllabus of Production Engineering (Production) 2021, kindly visit Production updated syllabus.

Wishing you great luck ahead.

For Production Engineering 6th Sem scheme and its subjects, do visit Production 6th Sem 2021 regulation scheme. For Professional Elective-V scheme and its subjects refer to Production Professional Elective-V syllabus scheme. The detailed syllabus of instrumentation and control is as follows.

Course Objectives:

Download the iStudy App for all syllabus and other updates.

Unit I

INTRODUCTION 9 Static and dynamic characteristics of measurement systems, standards and calibration, error and uncertainty analysis, statistical analysis of data, and curve fitting.

Unit II

Download the iStudy App for all syllabus and other updates.

Unit III

DATA DISPLAY AND RECORDING DEVICES 9 Data display-CRO, LED, LCD, magnetic tape recorders, x-y recorders, UV recorders, Oscilloscope recorders, digital printers and data loggers.

Unit IV

Download the iStudy App for all syllabus and other updates.

Unit V

STABILITY ANALYSIS 9 Stability criteria bode plots, routh and Nyquist criteria.

Course Outcomes:

Download the iStudy App for all syllabus and other updates.

Text Books:

1. D. Patranabis, Instrumentation and Control, PHI Learning Pvt. Ltd., 2011.
2. B.C.Nakra, K.K. Choudry, Instrumentation, Measurement and analysis, Tata McGraw Hill 2003.
3. Nagrath. J.J. and Gopal, control system engineering, New age international (p) ltd., 2000.

Reference Books:

1. Rangan. C.S., Sarma. G.R., Mani. VSV, Instrumentation Devices and Systems, Tata McGrawHill, 2000.
2. Sowhney. A.K., Electrical and Electronic Measurement and Instrumentation, Dhanpat rai & Cu,2003.
3. Benjamin C.Kuo, Automatic Control System, prentice hall of India pvt ltd., 2002.
4. Ernest O.Doeblin, Measurement systems applications and design, McGraw Hill International editions, 1990.
5. Renganathan. S., Transducer engineering, Allied publishers, 1990.

For detailed syllabus of all the other subjects of Production Engineering 6th Sem, visit Production 6th Sem subject syllabuses for 2021 regulation.

For all Production Engineering results, visit Anna University Production all semester results direct link.