TNDTE Syllabus Polymer Technology Diploma M Scheme

TNDTE Polymer Technology 1st Sem Syllabus

TNDTE Polymer Technology 2nd Sem Syllabus

TNDTE Polymer Technology 3rd Sem Syllabus

TNDTE Polymer Technology 4th Sem Syllabus

TNDTE Polymer Technology 5th Sem Syllabus

TNDTE Polymer Technology 6th Sem Syllabus

TNDTE Polymer Technology 7th Sem Syllabus

For all other details and updates about TNDTE Polymer Technology diploma related Academic Schedule, results, time table and latest syllabus will be updated here time to time.

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App It is a lightweight, easy to use, no images, and no pdfs platform to make students’ lives easier.
.

Wish you good luck!!!

For all other subjects of the semester you can visit Polymer 6th Sem syllabus & notices. For all other Polymer 6th Sem Syllabus for Diploma M Scheme TNDTE subjects do refer to Polymer 6th Sem Syllabus for Diploma M Scheme TNDTE. The detail syllabus for elective-ii polymer 6th sem syllabus for diploma tndte m scheme is as follows.

Dont forget to download iStudy for latest syllabus and results, class timetable and more. Incase of questions dont hesitate to leave a comment or leave a feedback in iStudy app for faster response.

Wish you a great luck ahead.

For all other subjects of the semester you can visit Polymer 5th Sem syllabus & notices. For all other Polymer 5th Sem Syllabus for Diploma M Scheme TNDTE subjects do refer to Polymer 5th Sem Syllabus for Diploma M Scheme TNDTE. The detail syllabus for elective- i polymer 5th sem syllabus for diploma tndte m scheme is as follows.

Dont forget to download iStudy for latest syllabus and results, class timetable and more. Incase of questions dont hesitate to leave a comment or leave a feedback in iStudy app for faster response.

Wish you a great luck ahead.

For all other polymer 6th sem syllabus for diploma m scheme tndte you can visit Polymer 6th Sem Syllabus for Diploma M Scheme TNDTE Subjects. For all other Elective-II subjects do refer to Elective-II. The detail syllabus for packaging technology is as follows.

Rationale:

On completion of the units of syllabus contents the students must be able to know about

1. Scope and functions of packaging
2. Advantages of plastics packaging over conventional packaging materials
3. Major forms of plastics materials used in packaging.
4. Packaging regulations and legislation.
5. Selection criteria of polymeric packages
6. Conversion processes like
   1. Compression and Transfer moulding
   2. Injection moulding
   3. Blow moulding and extrusion
   4. Rotational moulding and thermoforming etc.,
7. Comparison between the rigid packaging, semi rigid packaging and flexible packaging.
8. Design of moulded cushioning systems.
9. Applications of expanded polystyrene in packaging.
10. Advantages and disadvantages of moulded foams.
11. Testing of important properties like, barrier properties, migration properties, and compatibility properties.
12. Printing, labeling, pigmenting and sterilization systems of plastics packages.

Unit 1

Packaging Scope And Materials

Introduction to Plastics packaging – scope and functions of packaging – advantages of plastics packaging over conventional packaging materials – Major forms of plastics materials used in packaging: LDPE, LLDPE, HDPE, PP, PS, PVC, Nylon, Polyesters, EVOH, PVDC and Poly Vinyl Alcohol – distribution hazards – special requirements of food and medical packaging – packaging regulations and legislation. Selection criteria of suitable polymeric packages for oils, fats and allied products, soaps and detergents, cosmetics, food, dairy products, beverages, medicines, chemicals, paints, household and industrial goods.

Unit 2

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Unit 3

Flexible Packaging

Flexible Packaging: Extrusion film – cast film – cast sheet – blown film – multi layer film and sheet: coating, laminations and coextrusion -stretch and shrink wrap – pouches: pillow pouches, three side seal pouches, four side seal pouches, stand up pouches, forming pouches – bulk and heavy duty bags – heat sealing: bar or thermal sealing, impulse sealing, band sealing, hot wire or hot knife sealing, ultrasonic sealing and friction sealing, radiant sealing, dielectric, magnetic and induction sealing – advantages of flexible packaging .

Unit 4

Rigid And Semi Rigid Packaging

Rigid and semi rigid Packaging: Thermoformed packages -thermoforming moulds -form/fill/seal thermoforming operations – wrap forming – blister packaging -skin packaging – moulded packages -Expanded polystyrene and other foam systems – Design of moulded cushioning systems – applications of expanded polystyrene in packaging – Advantages and disadvantages of moulded foams -Comparison between flexible packaging and rigid packaging.

Unit 5

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Text Books:

1. E.M.Susan-Understanding Plastic packaging technology-Hanser Publishers(1995)

Reference Books:

1. A.S.Athalye -Plastics in packaging – Tata McGraw-Hill Co. Ltd.,New Delhi (1992)
2. R.L.Butzko – Plastics sheet forming – Hanser Publishers (1995)
3. John D. Beadle – Plastics forming – Ilifee, London (1982)
4. E.C.Bernhardt – Processing of Thermoplastic Materials -. Hanser Publishers (1995)

For detail syllabus of all other subjects of BE Polymer, M scheme do visit Polymer 6 syllabus for M Scheme.

Dont forget to download iStudy for latest syllabus and results, class timetable and more.

For all other polymer 6th sem syllabus for diploma m scheme tndte you can visit Polymer 6th Sem Syllabus for Diploma M Scheme TNDTE Subjects. For all other Elective-II subjects do refer to Elective-II. The detail syllabus for polymer mould engineering is as follows.

Rationale:

With the rapid expansion of Industries such as Paper, Sugar, Pharmaceutical, dyeing and food industries the demand for all these, technologists also increases. This specialized subject makes students aware about manufacturing process, quality control and packaging techniques.

Objectives:

On completion of the units of syllabus contents the students must be able to know about

• Mould materials their properties and applications
• Design of moulds and product to meet processing requirements.
• Important product design concepts like of ribs, bosses and undercuts etc.,
• Types of threads and its significance.
• Functions of inserts and their importance.
• Basic terminology and mould construction.
• Parting line construction.
• Design of gate system.
• Design of Ejection system.
• Hot runner mould.
• Compression and Transfer Mould Design their types, advantages, limitations and applications.
• Blow mould materials and constructions.
• Extrusion Die materials and construction.
• Designing of pipe, blown film and sheet dies.

Unit 1

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Unit 2

Mould Design Fundamentals, Feed, Ejection & Cooling System

Basic terminology and mould construction – Cavity and core (integer, insert) – Bolster – Sprue bush – Register ring – Guide pillar – Guide bush – Parting line construction – Stepped parting line – Irregular parting surface – Local stepped and profile parting line. Feed system – sprue – runners – runner cross section – Balancing of runner. Types of gating system – Winkle gate – Diaphragm gate – Sprue gate – Edge gate – Fan gate – Ring gate – Submarine gate – Pin point gate – Tab gate – Selection of gate and application – Types of ejection -Pin, stepped pin, D pin, blade, sleeve, stripper, air, double ejection -Sprue pullers – Sprue bush. Cavity cooling techniques – Core cooling techniques – Bolster cooling techniques – Sprue cooling – Ejection cooling.

Unit 3

Injection Mould Design

Types of injection moulds – General arrangement of 2 plate, 3 plate mould – Single, multi impression moulds – Single daylight, multi daylight moulds – Split mould – Actuation techniques – Cam actuation, finger cam, dog leg – Actuation of side core and side cavity -Empirical formula for determination of number of cavities – Elementary cost estimating procedure for mould. Hot runner mould – Elementary knowledge about hot runner mould.

Unit 4

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Unit 5

Blow Mould & Extrusion Die Design

Die and mandrel design – Die head – Side feed – Spider or axial flow head – Accumulator head – – Parison programming – Parting line -Pinch off design – Neck pinch off – Base pinch off – Flash pockets -Venting and mould surface finish – Cooling. Extrusion Die geometry – Designing of pipe die – Production line -Torpedo, mandrel, land – length, approach section – Inline type – offset type – Design of blown film – Side feed die, bottom feed die – Design of sheet die – Production line – Coat hanger type – Design of profile die ( one type only ) – Elementary idea about monofilament die.

Text Books:

1. Ronald D. Beck – Product Design – Van Nostrand-Reinhold Co. (1970)
2. R.G.W.Pye – Injection mould design -4th Ed- Longman scientific & Technical (2000)
3. R.H.Bebb – Plastic Mould Design – (Compression & Transfer mould)
4. Rosato – Blow Mould Design – Hanser Publications (1972)
5. M.V. Joshi – Extrusion Die Design -Macmillan India ltd (1992)

Reference Books:

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

For detail syllabus of all other subjects of BE Polymer, M scheme do visit Polymer 6 syllabus for M Scheme.

Dont forget to download iStudy for latest syllabus and results, class timetable and more.

For all other polymer 5th sem syllabus for diploma m scheme tndte you can visit Polymer 5th Sem Syllabus for Diploma M Scheme TNDTE Subjects. For all other Elective- I subjects do refer to Elective- I. The detail syllabus for tyre technology is as follows.

Rationale:

The subject aims at providing students the knowledge of various types of tyres and their manufacturing technique. The knowledge of Tyre reinforcement materials – Tyre mould design , curing and post curing methods and measurement of tyre properties will also be imparted.

Objectives:

On completion of the units of syllabus contents the students must be able to know about

• Introduction and development of tyres.
• Tyre sizing and Marking on the tyres.
• Different types of tyres and different components of tyres
• Manufacturing techniques of various tyres.
• Tyre reinforcement materials.
• Tyre mould design and methods of building green tyres
• Tyre curing methods, post cure inflation, quality control tests,
• Measurement of tyre properties, dimension
• Tyre construction analysis,
• Rolling resistance and non uniformity dimensional variations
• Type balance, mileage, evaluations, tyre flaws and separations, X-ray holography.BIS standards for tyres.

Unit 1

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Unit 2

Tyre Reinforcement And Tyre Performance

Cord- rubber composites and its properties and failure mechanism of cord reinforced rubber. Tyre forces on dry and wet road surface. Traction forces on dry, wet, ice, snow and irregular pavements, Breaking and traction of tyres. Tyre wear, rubber friction and sliding mechanism, various factors affecting friction and sliding. Tyre stresses and deformation, tyre noise, mechanism of noise generation, effect of tread pattern, vehicle speed etc.

Unit 3

Tyre Manufacturing

Manufacturing techniques of various tyres like two wheeler and car tyres, truck tyres, OTR,. formulations for various rubber components. Tyre reinforcement materials (Textile, steel, glass etc.). Criteria of selection, different styles and construction, textile treatment.

Unit 4

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Unit 5

Tyre Testing

Measurement of tyre properties, dimension, Tyre construction analysis, Endurance test wheel and plunger tests, traction, noise measurements. cornering coefficient aligning torque coefficient, load sensitivity and load transfer sensitivity, Rolling resistance, non uniformity dimensional variations, concentricity and ply steer. Type balance, mileage, evaluations, tyre flaws and separations, X-ray holography.BIS standards for tyres.

Text Books:

1. Samuel K. Clark, Mechanics of pneumatic Tires, National Bureau of standards, Monograph, US Govt. printing office, 1971.
2. Tom French, Tyre Technology, Adam Hilger, New York, 1989

Reference Books:

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

For detail syllabus of all other subjects of BE Polymer, M scheme do visit Polymer 5 syllabus for M Scheme.

Dont forget to download iStudy for latest syllabus and results, class timetable and more.

For all other polymer 5th sem syllabus for diploma m scheme tndte you can visit Polymer 5th Sem Syllabus for Diploma M Scheme TNDTE Subjects. For all other Elective- I subjects do refer to Elective- I. The detail syllabus for polymer composites is as follows.

Rationale:

This course helps the students to understand the various processing methods involved in the preparation of fiber reinforced plastics. Resins, reinforcing materials and other additives used in FRP manufacture and also basic design concept and fabrication of moulds.

Objectives:

On completion of the units of syllabus contents the students must be able to know about

• Basic concept of fiber reinforced plastics
• History and development of fiber reinforced plastics.
• Properties of composites and comparison of FRP and metals.
• Resins, reinforcing materials and other additives used in FRP manufacture.
• Basic design concept and fabrication of moulds.
• Various processing methods of FRP like Hand lay up, Spray up, Vacuum bag,etc.,
• Post processing methods like Cutting, Trimming, Machining, Joining, etc.,
• Moulding defects and their remedies.
• Applications of FRP like Household , Building and Construction etc.,

Unit 1

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Unit 2

Design And Fabrication Of Moulds

Basic design concept and fabrication of moulds for fiber reinforced plastics – Selection of mould materials – Type of moulds used – Cost economics – Fabrication of moulds -Preparation of prepregs – SMC -DMC compounds – Their properties.

Unit 3

Processing Methods

Processing method of fiber reinforced plastics – Hand lay up – Spray up – Vacuum bag – Pressure bag – Compression moulding – Injection moulding – Auto clave moulding – Centrifugal casting – Filament winding – Pultrusion -Matched die moulding and resin transfer moulding.

Unit 4

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Unit 5

Applications Of Frp

Applications of FRP – Household applications: Cladding and Decorative Sheeting – Building and Construction applications – Land transportation applications: Cars, Commercial vehicles, Containers and other applications – Rail transport applications: Coach structure, tank wagons – Marine applications: Boat hulls, Ship lifeboats, Open rowing boats, fast motor boats, slow motor boat and larger sail boat hulls – Air craft applications – Aero space applications: Radomes, Di-electric panels, Ducting and Secondary structures – Electrical applications -Agricultural applications – Industrial applications: Chemical plant.

Text Books:

L.Holloway – Composite materials – Elsevier, Amsterdam, 1966

Reference Books:

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

For detail syllabus of all other subjects of BE Polymer, M scheme do visit Polymer 5 syllabus for M Scheme.

Dont forget to download iStudy for latest syllabus and results, class timetable and more.

For all other subjects of the semester you can visit Polymer 7th Sem Syllabus for Diploma M Scheme TNDTE. The polymer 7th sem syllabus for diploma m scheme tndte is as follows.

Dont forget to download iStudy for latest syllabus and results, class timetable and more. Incase of questions dont hesitate to leave a comment or leave a feedback in iStudy app for faster response.

Wish you a great luck ahead.

For all other polymer 7th sem syllabus for diploma m scheme tndte you can visit Polymer 7th Sem Syllabus for Diploma M Scheme TNDTE Subjects. The detail syllabus for industrial training report and viva voce is as follows.

Rationale:

1. Introduction

The main objective of the sandwich Diploma course is to mould a well rounded technician acclimated with industrial environment while being a student in the institution.

The Sandwich Diploma Course study is pursued by students, in 7 Semesters of 3 % years duration, the subjects of 3years-Full Time Diploma Course being regrouped for academic convenience.

While in the 4th semester students under Industrial Training for 6 months(December through May) They also do course work in the institution for one day in a week, While in the 7th semester they undergo another spell of 6 months (June through November) Industrial training.

The Apprenticeship (Amendment) Act 1973 is followed in regulating the Industrial training procedure for Sandwich Course.

2. Attendance Certification

For complete syllabus and results, class timetable and more pls download iStudy Syllabus App. It’s a lightweight, easy to use, no images, no pdfs platform to make students life easier.

3. Training Reports

The students have to prepare two types of reports:

• Weekly report in the form of diary to be submitted to the concerned staff in-charge of the institution. This will be reviewed while awarding Internal Assessment marks.
• Comprehensive report at the end of each spell which will be used for Board Examination.

1. Industrial Training Diary

Students are required to maintain the record of day-to-day work done. Such record is called Industrial training Diary. Students have to write this report regularly. All days for the week should be accounted for clearly giving attendance particulars (Presence, absence, Leave, Holidays etc) The concern Industrial supervisor is to check periodically these progress reports.

2. Comprehensive Training Report

In addition to the diary, students are required to submit a comprehensive report on training with details of the organisation where the training was undergone after attestation by the supervisors. The comprehensive report should be incorporating study of plant/product/process/construction along with intensive in-depth study on any one of the topics such as processes, methods, tooling, construction and equipment, highlighting aspects of quality, productivity and system. The comprehensive report should be completed in the last week of Industrial training. Any data, drawings etc should be incorporated with the consent of the Organisation.

4. Scheme of the Evaluation

1. Sessional Marks

1. First review (during 3rd month. : 10marks
2. Second review (during 5th month. : 10marks
3. Attendance : 5 marks

(Awarded same as in Theory)
Total : 25 marks

2. Board Examinatiom Marks

1. Presentation about Industrial Training : 20marks
2. Comprehensive Training Report : 30marks
3. Viva- voce : 25marks

Total : 75 marks

For detail syllabus of all other subjects of BE Polymer, M scheme do visit Polymer 7th Sem syllabus for M scheme.

Dont forget to download iStudy Syllabus App for latest syllabus and results, class timetable and more.

For all other subjects of the semester you can visit Polymer 6th Sem Syllabus for Diploma M Scheme TNDTE. The polymer 6th sem syllabus for diploma m scheme tndte is as follows.

Dont forget to download iStudy for latest syllabus and results, class timetable and more. Incase of questions dont hesitate to leave a comment or leave a feedback in iStudy app for faster response.

Wish you a great luck ahead.