Anna University B.E Plastic Tech Syllabus 2017 Regulation

Anna University PLASTIC 1st Sem Syllabus

Anna University PLASTIC 2nd Sem Syllabus

Anna University PLASTIC 3rd Sem Syllabus

Anna University PLASTIC 4th Sem Syllabus

Anna University PLASTIC 5th Sem Syllabus

Anna University PLASTIC 6th Sem Syllabus

Anna University PLASTIC 7th Sem Syllabus

Anna University PLASTIC 8th Sem Syllabus

For all other details and updates about Anna University related Academic Schedule, updated syllabus, TNEA cutoff and college predictor, results, time table will be updated here time to time.

For the complete Syllabus, results, class timetable, and many other features kindly download the iStudy App It is a lightweight, easy to use, no images, and no pdfs platform to make students’ lives easier.
.

Wish you good luck!!!

For all other subjects of the semester you can visit Plastic Tech 7th Sem syllabus & notices. For all other Plastic Tech 7th Sem syllabus for B.Tech 2017 regulation Anna Univ subjects do refer to Plastic Tech 7th Sem syllabus for B.Tech 2017 regulation Anna Univ. The detail syllabus for electronics materials is as follows.

Dont forget to download iStudy for latest syllabus and results, class timetable and more. Incase of questions dont hesitate to leave a comment or leave a feedback in iStudy app for faster response.

Wish you a great luck ahead.

For all other plastic tech 7th sem syllabus for b.tech 2017 regulation anna univ you can visit Plastic Tech 7th Sem syllabus for B.Tech 2017 regulation Anna Univ Subjects. For all other Open Elective II subjects do refer to Open Elective II. The detail syllabus for design of experiments is as follows.

Course Objective:

• To impart knowledge on various types of experimental designs conduct of experiments and data analysis techniques.

Unit I

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Unit II

Single Factor Experiments

Completely Randomized Design- effect of coding the observations- model adequacy checkingestimation of model parameters, residuals analysis- treatment comparison methods-Duncans multiple range test, Newman-Keuels test, Fishers LSD test, Tukeys test- testing using contrasts- Randomized Block Design – Latin Square Design- Graeco Latin Square Design -Applications.

Unit III

Factorial Designs

Main and Interaction effects – Two and three factor full factorial designs- Fixed effects and random effects model – Rule for sum of squares and Expected Mean Squares- 2K Design with two and three factors- Yates Algorithm- fitting regression model- Randomized Block Factorial Design – Practical applications.

Unit IV

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Unit V

Taguchi Methods

Design of experiments using Orthogonal Arrays, Data analysis from Orthogonal experiments-Response Graph Method, ANOVA- attribute data analysis- Robust design- noise factors, Signal to noise ratios, Inner/outer OA design.

Course Outcome:

Able to apply experimental techniques to practical problems to improve quality of processes / products by optimizing the process / product parameters.

Text Books:

1. Krishnaiah K, and Shahabudeen P, Applied Design of Experiments and Taguchi Methods, PHI, India, 2011.

References:

1. Douglas C. Montgomery, Design and Analysis of Experiments, John Wiley and sons, 2005
2. Phillip J. Ross, Taguchi Techniques for Quality Engineering, Tata McGraw-Hill, India, 2005.

For detail syllabus of all other subjects of B.Tech Plastic Tech, 2017 regulation do visit Plastic Tech 7th Sem syllabus for 2017 Regulation.

Dont forget to download iStudy for latest syllabus and results, class timetable and more.

For all other plastic tech 7th sem syllabus for b.tech 2017 regulation anna univ you can visit Plastic Tech 7th Sem syllabus for B.Tech 2017 regulation Anna Univ Subjects. For all other Open Elective II subjects do refer to Open Elective II. The detail syllabus for electronics materials is as follows.

Course Objective:

Understanding the various materials and its properties contribution towards electrical and electronics field. This course covers the properties of materials behind the electronic applications.

Unit I

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Unit II

Conducting Materials

Introduction, factors affecting the conductivity of materials, classification based on conductivity of materials, temperature dependence of resistivity, Low resistivity materials (graphite, Al, Cu and steel) and its applications, high resistivity materials (manganin, constantin, nichrome, tungsten) and their applications. Superconductors: Meissner effect, classification and applications.

Unit III

Semiconducting and Magnetic Materials

Semiconductors: Introduction, types of semiconductors, temperature dependence of semiconductors, compound semiconductors, basic ideas of amorphous and organic semiconductors. Magnetic Materials: classification of magnetic materials, ferromagnetism-B-H curve (Qualitative), hard and soft magnetic materials, magneto materials applications.

Unit IV

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Unit V

Optoelectronic Andnano Electronic Materials

Optoelectronic materials. Introduction, properties, factor affecting optical properties, role of optoelectronic materials in LEDs, LASERs, photodetectors, solar cells. Nano electronic Materials: Introduction, advantage of nanoelectronic devices, materials, fabrication, challenges in Nano electronic materials.

Course Outcome:

With the basis, students will be able to have clear concepts on electronic behaviors of materials

Text Books:

1. S.O. Kasap Principles of Electronic Materials and Devices, 3rd edition, McGraw-Hill Education (India) Pvt. Ltd., 2007.
2. W D Callister, Materials Science and Engineering – An Introduction, Jr., John Willey and Sons, Inc, New York, 7th edition, 2007.

References:

1. B.G. Streetman and S. Banerjee, Solid State Electronic Devices, 6th edition, PHI Learning, 2009.
2. Eugene A. Irene, Electronic Materials Science, Wiley, 2005
3. Wei Gao, Zhengwei Li, Nigel Sammes, An Introduction to Electronic Materials for Engineers, 2nd Edition, World Scientific Publishing Co. Pvt. Ltd., 2011

For detail syllabus of all other subjects of B.Tech Plastic Tech, 2017 regulation do visit Plastic Tech 7th Sem syllabus for 2017 Regulation.

Dont forget to download iStudy for latest syllabus and results, class timetable and more.

For all other plastic tech 7th sem syllabus for b.tech 2017 regulation anna univ you can visit Plastic Tech 7th Sem syllabus for B.Tech 2017 regulation Anna Univ Subjects. For all other Open Elective II subjects do refer to Open Elective II. The detail syllabus for supply chain management is as follows.

Course Objective:

• To provide an insight on the fundamentals of supply chain networks, tools and techniques.

Unit I

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Unit II

Supply Chain Network Design

Role of Distribution in Supply Chain – Factors influencing Distribution network design – Design options for Distribution Network Distribution Network in Practice-Role of network Design in Supply Chain-Framework for network Decisions.

Unit III

Logistics in Supply Chain

Role of transportation in supply chain – factors affecting transportations decision – Design option for transportation network -Tailored transportation – Routing and scheduling in transportation.

Unit IV

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Unit V

Supply Chain and Information Technology

The role IT in supply chain- The supply chain IT frame work Customer Relationship Management -Internal supply chain management – supplier relationship management – future of IT in supply chain – E-Business in supply chain.

Course Outcome:

The student would understand the framework and scope of supply chain networks and functions.

Text Books:

1. Sunil Chopra, Peter Meindl and Kalra, Supply Chain Management, Strategy, Planning, and Operation, Pearson Education, 2010.

References:

1. Jeremy F.Shapiro, Modeling the Supply Chain, Thomson Duxbury, 2002.
2. Srinivasan G.S, Quantitative models in Operations and Supply Chain Management, PHI, 2010
3. David J.Bloomberg , Stephen Lemay and Joe B.Hanna, Logistics, PHI 2002.
4. James B.Ayers, Handbook of Supply Chain Management, St.Lucle press, 2000.

For detail syllabus of all other subjects of B.Tech Plastic Tech, 2017 regulation do visit Plastic Tech 7th Sem syllabus for 2017 Regulation.

Dont forget to download iStudy for latest syllabus and results, class timetable and more.

For all other plastic tech 7th sem syllabus for b.tech 2017 regulation anna univ you can visit Plastic Tech 7th Sem syllabus for B.Tech 2017 regulation Anna Univ Subjects. For all other Open Elective II subjects do refer to Open Elective II. The detail syllabus for lean six sigma is as follows.

Course Objective:

• To gain insights about the importance of lean manufacturing and six sigma practices.

Unit I

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Unit II

the Scope of Tools and Techniques

Tools for definition – IPO diagram, SIPOC diagram, Flow diagram, CTQ Tree, Project Charter -Tools for measurement – Check sheets, Histograms, Run Charts, Scatter Diagrams, Cause and effect diagram, Pareto charts, Control charts, Flow process charts, Process Capability Measurement, Tools for analysis – Process Mapping, Regression analysis, RU/CS analysis, SWOT, PESTLE, Five Whys, interrelationship diagram, overall equipment effectiveness, TRIZ innovative problem solving – Tools for improvement – Affinity diagram, Normal group technique, SMED, 5S, mistake proofing, Value stream Mapping, forced field analysis – Tools for control -Gantt chart, Activity network diagram, Radar chart, PDCA cycle, Milestone tracker diagram, Earned value management.

Unit III

Six Sigma Methodologies

Design For Six Sigma (DFSS),Design For Six Sigma Method – Failure Mode Effect Analysis (FMEA), FMEA process – Risk Priority Number (RPN)- Six Sigma and Leadership, committed leadership- Change Acceleration Process (CAP)- Developing communication plan -Stakeholder

Unit IV

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Unit V

Evaluation and Continuous Improvement Methods

Evaluation strategy – the economics of six sigma quality, Return on six Sigma (ROSS), ROI, poor project estimates – continuous improvement – lean manufacturing – value, customer focus,
Perfection, focus on waste, overproduction – waiting, inventory in process (IIP), processing waste, transportation, motion, making defective products, underutilizing people – Kaizen – 5S

Course Outcome:

The student would be able to relate the tools and techniques of lean sigma to increase productivity

References:

1. Michael L.George, David Rownalds, Bill Kastle, What is Lean Six Sigma, McGraw – Hill 2003
2. Thomas Pyzdek, The Six Sigma Handbook, McGraw-Hill,2000
3. Fred Soleimannejed , Six Sigma, Basic Steps and Implementation, AuthorHouse, 2004
4. Forrest W. Breyfogle, III, James M. Cupello, Becki Meadows, Managing Six Sigma:A Practical Guide to Understanding, Assessing, and Implementing the Strategy That Yields Bottom-Line Success, John Wiley and Sons, 2000
5. James P. Womack, Daniel T.Jones, Lean Thinking, Free Press Business, 2003

For detail syllabus of all other subjects of B.Tech Plastic Tech, 2017 regulation do visit Plastic Tech 7th Sem syllabus for 2017 Regulation.

Dont forget to download iStudy for latest syllabus and results, class timetable and more.

For all other plastic tech 7th sem syllabus for b.tech 2017 regulation anna univ you can visit Plastic Tech 7th Sem syllabus for B.Tech 2017 regulation Anna Univ Subjects. For all other Open Elective II subjects do refer to Open Elective II. The detail syllabus for selection of materials is as follows.

Course Objective:

The subject exposes students to the basics parameter for selection of materials and different classes of materials, manufacturing processes and their properties , applications of materials.

Unit I

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Unit II

Material Properties

Mechanical properties – fatigue strength – fracture Toughness – Thermal Properties – Magnetic Properties – Fabrication Properties -electrical , optical properties – Environmental Properties , Corrosion properties-shape and size-Material Cost and Availability-failure analysis

Unit III

Manufacturing Processing and Economic Analysis

Interaction of Materials Selection, Design, and Manufacturing Processes – Production Processes and Equipment for Metals – Metal Forming, Shaping, and Casting – Plastic Parts Processing -Composites Fabrication Processes – Advanced Ceramics Processing – surface treatment -Resource -The Price and Availability of Materials

Unit IV

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Unit V

Applications and Uses

Selection of Materials for Biomedical Applications – Medical Products – Materials in Electronic Packaging – Advanced Materials in Sports Equipment – Materials Selection for Wear Resistance -Advanced Materials in Telecommunications – Using Composites – Manufacture and Assembly with Plastics, fiber and Diamond Films.

Course Outcome:

Understand different types of availability materials
Easy and effective way to select required materials

• Ability to identify the material properties

Text Books:

1. Ashby, M. F. Materials selection in mechanical design, 3rd edition. Elsevier, 2005.
2. Ashby, M. F. and Johnson, K. Materials and design – the art and science of material selection in product design. Elsevier, 2002.

References:

1. Charles, J. A., Crane, F. A. A. and Furness, J. A. G. Selection and use of engineering materials, 3rd edition. Butterworth-Heinemann, 1997
2. Handbook of Materials Selection. Edited by Myer Kutz2002 John Wiley and Sons, Inc., NewYork.

For detail syllabus of all other subjects of B.Tech Plastic Tech, 2017 regulation do visit Plastic Tech 7th Sem syllabus for 2017 Regulation.

Dont forget to download iStudy for latest syllabus and results, class timetable and more.

For all other plastic tech 5th sem syllabus for b.tech 2017 regulation anna univ you can visit Plastic Tech 5th Sem syllabus for B.Tech 2017 regulation Anna Univ Subjects. For all other Open Elective I subjects do refer to Open Elective I. The detail syllabus for fuel cell chemistry is as follows.

Course Objective:

• To create awareness about alternate clean fuel available.
• To familiarize the students with the concepts and chemistry of fuel cell

Unit I

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Unit II

Fuel Cell Kinetics

Fuel cell reaction kinetics – electrode kinetics, overvoltage, Tafel equation, charge transfer reaction, exchange currents, electro catalysis – design, activation kinetics, Fuel cell charge and mass transport – flow field, transport in electrode and electrolyte.

Unit III

Characterization Techniques

Fuel cell characterization – in-situ and ex-situ characterization techniques, i-V curve, frequency response analysis; Fuel cell modeling and system integration: – 1D model – analytical solution and CFD models.

Unit IV

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Unit V

Applications of Fuel Cell

Fuel cell power plants: fuel processor, fuel cell power section (fuel cell stack), power conditioner; automotive applications, portable applications

Course Outcome:

Students will be aware of alternate energy sources and its importance of it.

Text Books:

1. Gregor Hoogers, Fuel Cell Technology Handbook, CRC Press, 2003.
2. R.P. OHayre,S. Cha, W. Colella, F.B. Prinz, Fuel Cell Fundamentals, Wiley, 2006.
3. A. J.Bard, L. R. Faulkner, Electrochemical Methods, Wiley, 2004.

References:

1. S. Basu, Fuel Cell Science and Technology, Springer, 2007.
2. H. Liu, Principles of Fuel Cells, Taylor and Francis, 2006.

For detail syllabus of all other subjects of B.Tech Plastic Tech, 2017 regulation do visit Plastic Tech 5th Sem syllabus for 2017 Regulation.

Dont forget to download iStudy for latest syllabus and results, class timetable and more.

For all other subjects of the semester you can visit Plastic Tech 5th Sem syllabus & notices. For all other Plastic Tech 5th Sem syllabus for B.Tech 2017 regulation Anna Univ subjects do refer to Plastic Tech 5th Sem syllabus for B.Tech 2017 regulation Anna Univ. The detail syllabus for fuel cell chemistry is as follows.

Dont forget to download iStudy for latest syllabus and results, class timetable and more. Incase of questions dont hesitate to leave a comment or leave a feedback in iStudy app for faster response.

Wish you a great luck ahead.

For all other plastic tech 5th sem syllabus for b.tech 2017 regulation anna univ you can visit Plastic Tech 5th Sem syllabus for B.Tech 2017 regulation Anna Univ Subjects. For all other Open Elective I subjects do refer to Open Elective I. The detail syllabus for product design and development is as follows.

Course Objective:

The course aims at providing the basic concepts of product design, product features and its architecture so that student can have a basic knowledge in the common features a product has and how to incorporate them suitably in product.

Unit I

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Unit II

Concept Generation and Selection

Task – Structured approaches – clarification – search – externally and internally – explore systematically – reflect on the solutions and processes – concept selection – methodology -benefits.

Unit III

Product Architecture

Implications – Product change – variety – component standardization – product performance -manufacturability – product development management – establishing the architecture – creation -clustering – geometric layout development – fundamental and incidental interactions – related system level design issues – secondary systems – architecture of the chunks – creating detailed interface specifications.

Unit IV

For complete syllabus and results, class timetable and more pls download iStudy. Its a light weight, easy to use, no images, no pdfs platform to make students life easier.

Unit V

Design for Manufacturing and Product Development

Definition – Estimation of Manufacturing cost – reducing the component costs and assembly costs – Minimize system complexity – Prototype basics – principles of prototyping – planning for prototypes – Economic Analysis – Understanding and representing tasks – baseline project planning – accelerating the project – project execution.

Course Outcome:

The student will be able to design some products for the given set of applications; also the knowledge gained through prototyping technology will help the student to make a prototype of a problem and hence product design and development can be achieved.

Text Books:

1. Kari T.Ulrich and Steven D.Eppinger, Product Design and Development, McGraw-Hill International Edns. 1999.

References:

1. Kemnneth Crow, Concurrent Engg./Integrated Product Development, DRM Associates, 26/3,Via Olivera, Palos Verdes, CA 90274(310) 377-569, Workshop Book.
2. Stephen Rosenthal, Effective Product Design and Development, Business One Orwin, Homewood, 1992, ISBN 1-55623-603-4.
3. Staurt Pugh, Tool Design -Integrated Methods for Successful Product Engineering, Addison Wesley Publishing, New york, NY.

For detail syllabus of all other subjects of B.Tech Plastic Tech, 2017 regulation do visit Plastic Tech 5th Sem syllabus for 2017 Regulation.

Dont forget to download iStudy for latest syllabus and results, class timetable and more.