Download the iStudy App for all syllabus and other updates.

For detailed syllabus of all the other subjects of MAE 6th Sem, 2021 curriculum do visit MAE 6th Sem subject syllabuses for 2021 regulation. For Mechanical & Automation Engineering 6th Sem semesters scheme and subjects, refer to MAE 6th Sem 2021 regulation scheme. The scheme details of Professional Elective-VII for MAE 6th Sem is as follows.

Don’t forget to download iStudy App for the latest syllabus, results, class timetable and many more features. In case of questions, don’t feel shy to leave a comment or leave feedback in the iStudy app for faster response.

For the results of Mechanical & Automation Engineering 6th Sem, kindly visit MAE 6th Sem direct results link.

For exam time table of Mechanical & Automation Engineering (MAE), kindly visit Anna University exam timetables.

For Mechanical & Automation Engineering (MAE) notices, kindly visit Anna University notices.

Download the iStudy App for all syllabus and other updates.

For updated syllabus of Mechanical & Automation Engineering (MAE) 2021, kindly visit MAE updated syllabus.

Wishing you great luck ahead.

For Mechanical & Automation Engineering 6th Sem scheme and its subjects, do visit MAE 6th Sem 2021 regulation scheme. For Professional Elective-VII scheme and its subjects refer to MAE Professional Elective-VII syllabus scheme. The detailed syllabus of fundamentals of nanoscience is as follows.

Course Objectives:

Download the iStudy App for all syllabus and other updates.

Unit I

INTRODUCTION TO NANOMATERIALS 9
Amorphous, Crystalline, microcrystalline, quasicrystalline and nanocrystalline materials- historical development of nanomaterials – Nanomaterials classification (Gleiter’s Classification) – properly changes done to size effects, Hall – Petch, inverse Hall- Petch effects – polymeric nanostructures

Unit II

ZERO DIMENSIONAL NANOMATERIALS 9
Nanoparticles – Properties – Processing – Liquid state processing – Sol-gel process, wet chemical synthesis -Vapour state processing – PVD, CVD, Aerosol processing, solid state processing – mechanical, mechanochemical synthesis – Application of nanoparticle.
Quailing Dots – Quantum confinement – Pauli Exclusion Principle – Processing – Optical lithography – MOCVD – Droplet epitaxy – Applications.

Unit III

Download the iStudy App for all syllabus and other updates.

Unit IV

SUPER HARD COATINGS AND BULK NANOSTRUCTURED MATERIALS 9
Superhard coating – types – characteristics – thermal stability – case studies (nc-TiN/a-Si3N4 coating) -Applications.
Buck nanostructure formation – Equal Channel angular pressing(ECAP) – High pressure torsion(HPT), Accumulative roll bending – Reciprocating extrusion – compression, cyclic close die forging – Repetitive corrugation and straightening – Grain refinement mechanisms.

Unit V

CHARACTERIZATION OF NANOMATERIALS 9
Nano indentation – Types of nanoindenter – Force actuation-Displacement measurement- factors affecting nanoindentation- Different models for calculation of E and hardness- Atomic force microscope (AFM) cantilever dynamics-Electrostatic force mode (EFM) – Magnetic force mode (MFM)

Course Outcomes:

Upon Completion of the course, the students will be able to

1. Explain the categories of nanomaterials and the effects due to which the properties changes
2. Describe the processes employed for processing zero dimensional nanomaterials and employ them in engineering applications
3. Select processes that can fabricate one dimensional nanomaterials
4. Prepare two dimensional nanomaterials and bulk nanostructures
5. Analyse the nanoindentation and AFM Data

Text Books:

Download the iStudy App for all syllabus and other updates.

Reference Books:

1. Bamberg, D., Grundman, M. and Ledentsov, N.N., “Quantum Dot Heterostructures”, Wiley, 1999.
2. Charles P. Poole Jr., Frank J. Ownes, ‘Introduction to Nanotechnology”, Wiley Interscience, 2003.
3. G Timp (ed), “Nanotechnology”, AIP press/Springer, 1999.
4. G. Wilde, “Nanostructured Materials’, Elsevier, 2008.
5. Mark Ratner and Daniel Ratner, “Nano Technology”, Pearson Education, New Delhi, 2003.

For detailed syllabus of all the other subjects of Mechanical & Automation Engineering 6th Sem, visit MAE 6th Sem subject syllabuses for 2021 regulation.

For all Mechanical & Automation Engineering results, visit Anna University MAE all semester results direct link.

For Mechanical & Automation Engineering 6th Sem scheme and its subjects, do visit MAE 6th Sem 2021 regulation scheme. For Professional Elective-VII scheme and its subjects refer to MAE Professional Elective-VII syllabus scheme. The detailed syllabus of metal and powder forming techniques is as follows.

Course Objectives:

Download the iStudy App for all syllabus and other updates.

Unit I

INTRODUCTION 9
Mechanical behavior of materials- Elastic and plastic deformations – Classification of forming processes -Temperature in metal working: Cold, Warm and hot working – Introduction to the theoryof plastic deformation.

Unit II

BULK FORMING 9
Introduction – Plastic deformation in forging, rolling, extrusion, rod/wire, tube drawing and swaging processes and their applications – Effect of friction, calculation of forces, work done, process parameters, equipment’s and defects – Design for manufacturing – Economics of bulk forming.

Unit III

Download the iStudy App for all syllabus and other updates.

Unit IV

SPECIAL FORMING 9
Orbital forging – Isothermal forging – Hot and cold Isostatic pressing – High speed extrusion – High speed forming machines – Rubber pad forming – Water hammer forming – Fine blanking – Incremental forming and comparing the above with conventional forming.

Unit V

POWDER FORMING 9
Introduction – Powder production methods – Particle size characterization – Blending – Compacting – Sintering – Secondary and finishing operations – Advantages and applications of powder metallurgy – Design for manufacturing – Powder forging, rolling, extrusion, drawing – Economics of powder forging.

Course Outcomes:

Upon completion of this course, the students will be able to:

1. Illustrate deformation types and classification of forming processes.
2. Describe bulk forming processes and their applications.
3. Elaborate different sheet metal forming processes and their applications.
4. Compare and distinguish conventional and special forming processes.
5. Discuss powder forming processes and its applications

Text Books:

Download the iStudy App for all syllabus and other updates.

Reference Books:

1. Heinz Tschatsch, “Metal Forming Practise: Processes – Machines – Tools”, Springer-Verlag Berlin Heidelberg., Germany, 2006.
2. Juneja B.L., “Fundamentals of Metal forming Processes”, New Age International Publishers Ltd., Chennai, India, 2018.
3. Kumar Surender, “Technology of Metal Forming Processes”, PHI learning Pvt. Ltd., New Delhi, India, 2008.
4. Nagpal G.R.,“Metal Forming Processes”, Khanna Publishers., New Delhi, India, 2000.
5. Mikell P. Groover, “Fundamental of Modern Manufacturing: Materials, Processes and Systems”, John Wiley and Sons Ltd., United States, 2013.

For detailed syllabus of all the other subjects of Mechanical & Automation Engineering 6th Sem, visit MAE 6th Sem subject syllabuses for 2021 regulation.

For all Mechanical & Automation Engineering results, visit Anna University MAE all semester results direct link.

For Mechanical & Automation Engineering 6th Sem scheme and its subjects, do visit MAE 6th Sem 2021 regulation scheme. For Professional Elective-VII scheme and its subjects refer to MAE Professional Elective-VII syllabus scheme. The detailed syllabus of renewable energy technologies is as follows.

Course Objectives:

Download the iStudy App for all syllabus and other updates.

Unit I

ENERGY SCENARIO 9
Indian energy scenario in various sectors – domestic, industrial, commercial, agriculture, transportation and others – Present conventional energy status – Present renewable energy statusPotential of various renewable energy sources-Global energy status-Per capita energy consumption – Future energy plans

Unit II

SOLAR ENERGY 9
Solar radiation – Measurements of solar radiation and sunshine – Solar spectrum – Solar thermal collectors – Flat plate and concentrating collectors – Solar thermal applications – Solar thermal energy storage – Fundamentals of solar photo voltaic conversion – Solar cells – Solar PV Systems – Solar PV applications.

Unit III

Download the iStudy App for all syllabus and other updates.

Unit IV

BIO-ENERGY 0^5^ 9
Bio resources – Biomass direct combustion – thermochemical conversion – biochemical conversionmechanical conversion – Biomass gasifier – Types of biomass gasifiers – Cogeneration — Carbonisation – Pyrolysis – Biogas plants – Digesters -Biodiesel production – Ethanol production -Applications.

Unit V

OCEAN AND GEOTHERMAL ENERGY 9
Small hydro – Tidal energy – Wave energy – Open and closed OTEC Cycles – Limitations -Geothermal energy – Geothermal energy sources – Types of geothermal power plants – Applications – Environmental impact.

Course Outcomes:

At the end of the course the students would be able to

1. Discuss the Indian and global energy scenario.
2. Describe the various solar energy technologies and its applications.
3. Explain the various wind energy technologies.
4. Explore the various bio-energy technologies.
5. Discuss the ocean and geothermal technologies.

Text Books:

Download the iStudy App for all syllabus and other updates.

Reference Books:

1. Godfrey Boyle, “Renewable Energy, Power for a Sustainable Future”, Oxford University Press, U.K., 2012.
2. Rai.G.D., “Non-Conventional Energy Sources”, Khanna Publishers, New Delhi, 2014.
3. Sukhatme.S.P., “Solar Energy: Principles of Thermal Collection and Storage”, Tata McGraw Hill Publishing Company Ltd., New Delhi, 2009.
4. Tiwari G.N., “Solar Energy – Fundamentals Design, Modelling and applications”, Alpha Science Intl Ltd, 2015.
5. Twidell, J.W. & Weir A., “Renewable Energy Resources”, EFNSpon Ltd., UK, 2015.

For detailed syllabus of all the other subjects of Mechanical & Automation Engineering 6th Sem, visit MAE 6th Sem subject syllabuses for 2021 regulation.

For all Mechanical & Automation Engineering results, visit Anna University MAE all semester results direct link.

For Mechanical & Automation Engineering 6th Sem scheme and its subjects, do visit MAE 6th Sem 2021 regulation scheme. For Professional Elective-VII scheme and its subjects refer to MAE Professional Elective-VII syllabus scheme. The detailed syllabus of composite materials and mechanics is as follows.

Course Objectives:

Download the iStudy App for all syllabus and other updates.

Unit I

INTRODUCTION, LAMINA CONSTITUTIVE EQUATIONS & MANUFACTURING 9
Definition -Need – General Characteristics, Applications. Fibers – Glass, Carbon, Ceramicand Aramid fibers. Matrices – Polymer, Graphite, Ceramic and Metal Matrices – Characteristics of fibers and matrices. Lamina Constitutive Equations: Lamina Assumptions – Macroscopic Viewpoint. Generalized Hooke’s Law. Reduction to Homogeneous Orthotropic Lamina – Isotropic limit case, Orthotropic Stiffness matrix (Qij), Typical Commercial material properties, Rule of Mixtures. Generally Orthotropic Lamina -Transformation Matrix, Transformed Stiffness. Manufacturing:Bag Moulding Compression Moulding – Pultrusion – Filament Winding – Other Manufacturing Processes

Unit II

FLAT PLATE LAMINATE CONSTITUTE EQUATIONS 9
Definition of stress and Moment Resultants. Strain Displacement relations. Basic Assumptions of Laminated anisotropic plates. Laminate Constitutive Equations – Coupling Interactions, Balanced Laminates, Symmetric Laminates, Angle Ply Laminates, Cross Ply Laminates. Laminate Structural Moduli. Evaluation of Lamina Properties from Laminate Tests. Quasi-Isotropic Laminates. Determination of Lamina stresses within Laminates.

Unit III

Download the iStudy App for all syllabus and other updates.

Unit IV

THERMAL ANALYSIS 9
Assumption of Constant C.T. E’s. Modification of Hooke’s Law. Modification of Laminate Constitutive Equations. Orthotropic Lamina C.T. E’s. C.T. E’s for special Laminate Configurations -Unidirectional, Off-axis, Symmetric Balanced Laminates, Zero C.T.E laminates, Thermally Quasi-Isotropic Laminates

Unit V

ANALYSIS OF LAMINATED FLAT PLATES 9
Equilibrium Equations of Motion. Energy Formulations. Static Bending Analysis. Buckling Analysis.Free Vibrations – Natural Frequencies

Course Outcomes:

At the end of the course the students would be able to

1. Summarize the various types of Fibers, Equations and manufacturing methods for
2. Derive Flat plate Laminate equations
3. Analyze Lamina strength
4. Analyze the thermal behavior of Composite laminates
5. Analyze Laminate flat plates

Text Books:

Download the iStudy App for all syllabus and other updates.

Reference Books:

1. Agarwal, B.D., and Broutman L.J., “Analysis and Performance of Fiber Composites”, John Wiley and Sons, New York, 1990.
2. Halpin, J.C., “Primer on Composite Materials, Analysis”, Technomic Publishing Co., 1984.
3. Issac M. Daniel and Ori Ishai, “Engineering Mechanics of Composite Materials”, Oxford University Press-2006, First Indian Edition – 2007
4. Mallick, P.K., Fiber,” Reinforced Composites: Materials, Manufacturing and Design”, Maneel Dekker Inc, 1993.
5. Mallick, P.K. and Newman, S., (edition), “Composite Materials Technology: Processes and Properties”, Hansen Publisher, Munish, 1990.

For detailed syllabus of all the other subjects of Mechanical & Automation Engineering 6th Sem, visit MAE 6th Sem subject syllabuses for 2021 regulation.

For all Mechanical & Automation Engineering results, visit Anna University MAE all semester results direct link.

For Mechanical & Automation Engineering 6th Sem scheme and its subjects, do visit MAE 6th Sem 2021 regulation scheme. For Professional Elective-VII scheme and its subjects refer to MAE Professional Elective-VII syllabus scheme. The detailed syllabus of design concepts in engineering is as follows.

Course Objectives:

Download the iStudy App for all syllabus and other updates.

Unit I

DESIGN TERMINOLOGY 9
Definition-various methods and forms of design-importance of product design-static and dynamic products-various design projects-morphology of design-requirements of a good design-concurrent engineering-computer aided engineering-codes and standards-product and process cycles-bench marking.

Unit II

INTRODUCTION TO DESIGN PROCESSES 9
Basic modules in design process-scientific method and design method-Need identification, importance of problem definition-structured problem, real life problem- information gathering -customer requirements-Quality Function Deployment (QFD)- product design specifications-generation of alternative solutions-Analysis and selection-Detail design and drawings-Prototype, modeling, simulation, testing and evaluation

Unit III

Download the iStudy App for all syllabus and other updates.

Unit IV

HUMAN AND SOCIETAL ASPECTS IN PRODUCT DEVELOPMENT 9
Human factors in design, ergonomics, user friendly design-Aesthetics and visual aspects environmental aspects-marketing aspects-team aspects-legal aspects-presentation aspects

Unit V

MATERIAL AND PROCESSES IN DESIGN 9
Material selection for performance characteristics of materials-selection for new design substitution for existing design-economics of materials-selection methods-recycling and material selection-types of manufacturing process, process systems- Design for Manufacturability (DFM) – Design for Assembly (DFA).

Course Outcomes:

At the end of the course the students would be able to

1. Analyze the various design requirements and get acquainted with the processes involved in product development.
2. Apply the design processes to develop a successful product.
3. Apply scientific approaches to provide design solutions.
4. Design solution through relate the human needs and provide a solution.
5. Apply the principles of material selection, costing and manufacturing in design.

Text Books:

Download the iStudy App for all syllabus and other updates.

Reference Books:

1. Dhillon, B. S., Advanced Design Concepts for Engineers, Technomic Publishing Co., 1998.
2. Edward B. Magrab, Satyandra K. Gupta, F. Patrick McCluskey and Peter A. Sandborn, “Integrated Product and Process Design and Development”, CRC Press, 2009.
3. James Garratt, “Design and Technology”, Cambridge University Press, 1996.
4. Joseph E. Shigley, Charles R.Mische, and Richard G. Budynas, “Mechanical Engineering Design”, McGraw Hill Professional, 2003.
5. Sumesh Krishnan and MukulSukla, Concepts in Engineering Design, Notion Press, 2016.

For detailed syllabus of all the other subjects of Mechanical & Automation Engineering 6th Sem, visit MAE 6th Sem subject syllabuses for 2021 regulation.

For all Mechanical & Automation Engineering results, visit Anna University MAE all semester results direct link.

For Mechanical & Automation Engineering 6th Sem scheme and its subjects, do visit MAE 6th Sem 2021 regulation scheme. For Professional Elective-VII scheme and its subjects refer to MAE Professional Elective-VII syllabus scheme. The detailed syllabus of non-traditional machining processes is as follows.

Course Objectives:

Download the iStudy App for all syllabus and other updates.

Unit I

INTRODUCTION AND MECHANICAL ENERGY BASED PROCESSES 9
Introduction – Need for non-traditional machining processes – Classification of non-traditional machining processes – Applications, advantages and limitations of non-traditional machining processes – Abrasive jet machining, Abrasive water jet machining, Ultrasonic machining their principles, equipment, effect of process parameters, applications, advantages and limitations.

Unit II

CHEMICAL AND ELECTRO CHEMICAL ENERGY BASED PROCESSES 9
Principles, equipments, effect of process parameters, applications, advantages and limitations of Chemical machining, Electro-chemical machining, Electro-chemical honing, Electro-chemical grinding, Electro chemical deburring.

Unit III

Download the iStudy App for all syllabus and other updates.

Unit IV

NANO FINISHING PROCESSES 9
Principles, equipments, effect of process parameters, applications, advantages and limitations of Abrasive flow machining – Chemo mechanical polishing, Magnetic abrasive finishing, Magnetorheological finishing, Magneto rheological abrasive flow finishing.

Unit V

HYBRID NON-TRADITIONAL MACHINING PROCESSES 9
Introduction – Various hybrid non-traditional machining processes, their working principles, equipments, effect of process parameters, applications, advantages and limitations. Selection and comparison of different non-traditional machining processes.

Course Outcomes:

At the end of the course the students would be able to

1. Formulate different types of non-traditional machining processes and evaluate mechanical energy based non-traditional machining processes.
2. Illustrate chemical and electro chemical energy based processes.
3. Evaluate thermo-electric energy based processes.
4. Interpret nano finishing processes.
5. Analyse hybrid non-traditional machining processes and differentiate non- traditional machining processes.

Text Books:

Download the iStudy App for all syllabus and other updates.

Reference Books:

1. Benedict, G.F., “Non-traditional Manufacturing Processes”, Marcel Dekker Inc., New York 1987. ISBN-13: 978-0824773526.
2. Carl Sommer, “Non-Traditional Machining Handbook”, Advance Publishing., United States, 2000, ISBN-13: 978-1575373256.
3. Golam Kibria, Bhattacharyya B. and Paulo Davim J., “Non-traditional Micromachining Processes: Fundamentals and Applications”, Springer International Publishing., Switzerland, 2017, ISBN:978-3-319-52008-7.
4. Jagadeesha T., “Non-Traditional Machining Processes”, I.K. International Publishing House Pvt.Ltd., New Delhi, India, 2017, ISBN-13: 978-9385909122.
5. Kapil Gupta, Neelesh K. Jain and Laubscher R.F., “Hybrid Machining Processes: Perspectives on Machining and Finishing”, 1st edition, Springer International Publishing., Switzerland, 2016, ISBN-13: 978-3319259208.

For detailed syllabus of all the other subjects of Mechanical & Automation Engineering 6th Sem, visit MAE 6th Sem subject syllabuses for 2021 regulation.

For all Mechanical & Automation Engineering results, visit Anna University MAE all semester results direct link.

For Mechanical & Automation Engineering 6th Sem scheme and its subjects, do visit MAE 6th Sem 2021 regulation scheme. For Professional Elective-VII scheme and its subjects refer to MAE Professional Elective-VII syllabus scheme. The detailed syllabus of micro electro mechanical systems is as follows.

Course Objectives:

Download the iStudy App for all syllabus and other updates.

Unit I

INTRODUCTION 9
Intrinsic Characteristics of MEMS – Energy Domains and Transducers- Sensors and Actuators -Introduction to Micro fabrication – Silicon based MEMS processes – New Materials – Review of Electrical and Mechanical concepts in MEMS – Semiconductor devices -Polymers in MEMS-Polyamide – SU-8 – Liquid Crystal Polymer (LCP) – PDMS – PMMA – Parylene – Fluorocarbon.

Unit II

SENSORS 9
Characteristics of sensors – Electrostatic sensors – Parallel plate capacitors – Piezoresistive sensors – Piezoresistive sensor materials – Stress and strain analysis – Flexural beam bending – Torsional deflection- Applications to Inertia, Pressure, Tactile and Flow sensors – Piezoelectric sensors and actuators – piezoelectric effects – piezoelectric materials

Unit III

Download the iStudy App for all syllabus and other updates.

Unit IV

MICROMACHINING 9
Silicon Anisotropic Etching – Anisotropic Wet Etching – Dry Etching of Silicon – Plasma Etching- Deep Reaction Ion Etching (DRIE) – Isotropic Wet Etching – Gas Phase Etchants – Case studies – Basic surface micro machining processes – Structural and Sacrificial Materials – Acceleration of sacrificial Etch – Striction and Antirestriction methods – LIGA Process – Assembly of 3D MEMS – Foundry process

Unit V

APPLICATIONS OF MEMS INERTIAL SENSORS 9
Application to Acceleration, Inertia, Acoustic, Tactile, Pressure, Flow and Tactile sensors- Optical MEMS -Lenses and Mirrors -Actuators for Active Optical MEMS.- RF MEMS and Microfluidics.

Course Outcomes:

Upon successful completion of the course, students should be able to:

1. Recognize MEMS Energy Domains and Transducers, Sensors and Actuators.
2. Select the Various MEMS sensors and its Stress and strain
3. Apply various MEMS actuators in Real time system.
4. Demonstrate various micro machining processes, Structural and Sacrificial Materials
5. Analyze the various MEMS inertial, tactile, pressure and flow sensors in real time system

Text Books:

Download the iStudy App for all syllabus and other updates.

Reference Books:

1. James J.Allen, “Micro Electro Mechanical System Design”, CRC Press Publisher, 2010
2. Julian w. Gardner, Vijay K. Varadan, Osama O. Awadelkarim, “Micro Sensors MEMS and Smart Devices”, John Wiley & Son LTD,2002
3. Mohamed Gad-el-Hak, editor, “ The MEMS Handbook”, CRC press Baco Raton, 2000
4. Nadim Maluf,“ An Introduction to Micro Electro Mechanical System Design”, Artech House, 2000.
5. Thomas M.Adams and Richard A.Layton, “Introduction MEMS, Fabrication and Application,” Springer 201

For detailed syllabus of all the other subjects of Mechanical & Automation Engineering 6th Sem, visit MAE 6th Sem subject syllabuses for 2021 regulation.

For all Mechanical & Automation Engineering results, visit Anna University MAE all semester results direct link.

For Mechanical & Automation Engineering 6th Sem scheme and its subjects, do visit MAE 6th Sem 2021 regulation scheme. For Professional Elective-VII scheme and its subjects refer to MAE Professional Elective-VII syllabus scheme. The detailed syllabus of automobile engineering is as follows.

Course Objectives:

Download the iStudy App for all syllabus and other updates.

Unit I

VEHICLE STRUCTURE AND ENGINES 9
Types of automobiles vehicle construction and different layouts, chassis, frame and body, Vehicle aerodynamics (various resistances and moments involved), IC engines – components-functions and materials, variable valve timing (VVT).

Unit II

ENGINE AUXILIARY SYSTEMS 9
Electronically controlled gasoline injection system for SI engines, Electronically controlled diesel injection system (Unit injector system, Rotary distributor type and common rail direct injection system), Electronic ignition system (Transistorized coil ignition system, capacitive discharge ignition system), Turbo chargers (WGT, VGT), Engine emission control by three way catalytic converter system, Emission norms (Euro and BS).

Unit III

Download the iStudy App for all syllabus and other updates.

Unit IV

STEERING, BRAKES AND SUSPENSION SYSTEMS 9
Steering geometry and types of steering gear box-Power Steering, Types of Front Axle, Types of Suspension Systems, Pneumatic and Hydraulic Braking Systems, Antilock Braking System (ABS),electronic brake force distribution (EBD) and Traction Control.

Unit V

ALTERNATIVE ENERGY SOURCES 9

Use of Natural Gas, Liquefied Petroleum Gas, Bio-diesel, Bio-ethanol, Gasohol and Hydrogen in Automobiles-Engine modifications required -Performance, Combustion and Emission Characteristics of SI and CI engines with these alternate fuels – Electric and Hybrid Vehicles, Fuel Cell Note:
Practical Training in dismantling and assembling of Engine parts and Transmission Systems should be given to the students.

Course Outcomes:

At the end of the course the students would be able to

1. Recognize the various parts of the automobile and their functions and materials.
2. Discuss the engine auxiliary systems and engine emission control.
3. Distinguish the working of different types of transmission systems.
4. Explain the Steering, Brakes and Suspension Systems.
5. Predict possible alternate sources of energy for IC Engines.

Text Books:

Download the iStudy App for all syllabus and other updates.

Reference Books:

1. Ganesan V. “Internal Combustion Engines”, Third Edition, Tata McGraw-Hill, 2012.
2. Heinz Heisler, “Advanced Engine Technology,” SAE International Publications USA, 1998.
3. Joseph Heitner, “Automotive Mechanics,” Second Edition, East-West Press, 1999.
4. Martin W, Stockel and Martin T Stockle , “Automotive Mechanics Fundamentals,” The Good heart – Will Cox Company Inc, USA ,1978.
5. Newton, Steeds and Garet, “Motor Vehicles”, Butterworth Publishers,1989.

For detailed syllabus of all the other subjects of Mechanical & Automation Engineering 6th Sem, visit MAE 6th Sem subject syllabuses for 2021 regulation.

For all Mechanical & Automation Engineering results, visit Anna University MAE all semester results direct link.

Download the iStudy App for all syllabus and other updates.

For detailed syllabus of all the other subjects of MAE 6th Sem, 2021 curriculum do visit MAE 6th Sem subject syllabuses for 2021 regulation. For Mechanical & Automation Engineering 6th Sem semesters scheme and subjects, refer to MAE 6th Sem 2021 regulation scheme. The scheme details of Professional Elective-VI for MAE 6th Sem is as follows.

Don’t forget to download iStudy App for the latest syllabus, results, class timetable and many more features. In case of questions, don’t feel shy to leave a comment or leave feedback in the iStudy app for faster response.

For the results of Mechanical & Automation Engineering 6th Sem, kindly visit MAE 6th Sem direct results link.

For exam time table of Mechanical & Automation Engineering (MAE), kindly visit Anna University exam timetables.

For Mechanical & Automation Engineering (MAE) notices, kindly visit Anna University notices.

Download the iStudy App for all syllabus and other updates.

For updated syllabus of Mechanical & Automation Engineering (MAE) 2021, kindly visit MAE updated syllabus.

Wishing you great luck ahead.