For detailed syllabus of all other subjects of Industrial Engineering 2nd Sem, 2021 curriculum do visit Industrial 2nd Sem subject syllabuses for 2021 regulation.

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

In case of questions, don’t feel shy to leave a comment or leave feedback in the iStudy app for faster response.

For the results of Industrial Engineering 2nd Sem, kindly visit Industrial 2nd Sem direct results link.

For updated syllabus of Industrial Engineering (Industrial) 2021, kindly visit Industrial updated syllabus.

For exam time table of Industrial Engineering (Industrial), kindly visit Anna University exam timetables.

For Industrial Engineering (Industrial) notices, kindly visit Anna University notices.

Wishing you great luck ahead.

For Industrial Engineering 2nd Sem scheme and its subjects, do visit Industrial 2nd Sem 2021 regulation scheme. The detailed syllabus of basic electrical and electronics engineering laboratory is as follows.

Course Objective:

• To train the students in conducting load tests on electrical machines
• To gain practical experience in characterizing electronic devices
• To train the students to use DSO for measurements.

List of Experiments:

1. Verification of ohms and Kirchhoff’s Laws.
2. Load test on DC Shunt Motor.
3. Load test on Self Excited DC Generator
4. Load test on Single phase Transformer
5. Load Test on Induction Motor
6. Characteristics of PN and Zener Diodes
7. Characteristics of BJT, SCR and MOSFET
8. Half wave and Full Wave rectifiers
9. Study of Logic Gates
10. Implementation of Binary Adder and Subtractor
11. Study of DSO

Course Outcome:

After completing this course, the students will be able to

1. Use experimental methods to verify the Ohm’s and Kirchhoff’s Laws.
2. Analyze experimentally the load characteristics of electrical machines
3. Analyze the characteristics of basic electronic devices
4. Use DSO to measure the various parameters

For detailed syllabus of all other subjects of Industrial Engineering, 2021 regulation curriculum do visit Industrial 2nd Sem subject syllabuses for 2021 regulation.

For all Industrial Engineering results, visit Anna University Industrial all semester results direct link.

For Industrial Engineering 2nd Sem scheme and its subjects, do visit Industrial 2nd Sem 2021 regulation scheme. The detailed syllabus of engineering practices laboratory is as follows.

Course Objective:

The main learning objective of this course is to provide hands on training to the students in:

1. Drawing pipe line plan; laying and connecting various pipe fittings used in common household plumbing work; Sawing; planing; making joints in wood materials used in commonhousehold wood work.
2. Wiring various electrical joints in common household electrical wire work.
3. Welding various joints in steel plates using arc welding work; Machining various simple processes like turning, drilling, tapping in parts; Assembling simple mechanical assembly of common household equipments; Making a tray out of metal sheet using sheet metal work.
4. Soldering and testing simple electronic circuits; Assembling and testing simple electronic components on PCB.

Group-A (Civil and Electrical)

Part I Civil Engineering Practices 15

Plumbing Work:

1. Connecting various basic pipe fittings like valves, taps, coupling, unions, reducers,elbows and other components which are commonly used in household.
2. Preparing plumbing line sketches.
3. Laying pipe connection to the suction side of a pump
4. Laying pipe connection to the delivery side of a pump.
5. Connecting pipes of different materials: Metal, plastic and flexible pipes used inhousehold appliances.

Wood Work:

1. Sawing,
2. Planing and
3. Making joints like T-Joint, Mortise joint and Tenon joint and Dovetail joint.

Wood Work Study:

1. Studying joints in door panels and wooden furniture
2. Studying common industrial trusses using models.

Part II Electrical Engineering Practices 15

1. Introduction to switches, fuses, indicators and lamps-Basic switch board wiring with lamp, fan and three pin socket
2. Staircase wiring
3. Fluorescent Lamp wiring with introduction to CFL and LED types.
4. Energy meter wiring and related calculations/ calibration
5. Study of Iron Box wiring and assembly
6. Study of Fan Regulator (Resistor type and Electronic type using Diac/Triac/quadrac)
7. Study of emergency lamp wiring/Water heater

Group-B (Mechanical and Electronics)

Part III Mechanical Engineering Practices

Welding Work:

1. Welding of Butt Joints, Lap Joints, and Tee Joints using arc welding.
2. Practicing gas welding.

Basic Machining Work:

1. (simple)Turning.
2. (simple)Drilling.
3. (simple)Tapping.

Assembly Work:

1. Assembling a centrifugal pump.
2. Assembling a household mixer.
3. Assembling an airconditioner.

Sheet Metal Work:

1. Making of a square tray

Foundry Work:

1. Demonstrating basic foundry operations.

Part IV Electronic Engineering Practices

Soldering Work:

1. Soldering simple electronic circuits and checking continuity.

Electronic Assembly and Testing Work:

1. Assembling and testing electronic components on a small PCB.

Electronic Equipment Study:

1. Study an elements of smart phone..
2. Assembly and dismantle of LED TV.
3. Assembly and dismantle of computer/ laptop

Course Outcome:

Upon completion of this course, the students will be able to:

1. Draw pipe line plan; lay and connect various pipe fittings used in common household plumbing work; Saw; plan; make joints in wood materials used in common household wood work.
2. Wire various electrical joints in common household electrical wire work.
3. Weld various joints in steel plates using arc welding work; Machine various simple processeslike turning, drilling, tapping in parts; Assemble simple mechanical assembly of common household equipments; Make a tray out of metal sheet using sheet metal work.
4. Solder and test simple electronic circuits; Assemble and test simple electronic components on PCB.

For detailed syllabus of all other subjects of Industrial Engineering, 2021 regulation curriculum do visit Industrial 2nd Sem subject syllabuses for 2021 regulation.

For all Industrial Engineering results, visit Anna University Industrial all semester results direct link.

For Industrial Engineering 2nd Sem scheme and its subjects, do visit Industrial 2nd Sem 2021 regulation scheme. The detailed syllabus of ncc credit course level 1 is as follows.

Nx3251 (Army Wing)

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Nx3252 (Naval Wing)

L T P C

Ncc General

NCC 1 Aims, Objectives and Organization of NCC
NCC 2 Incentives
NCC 3 Duties of NCC Cadet
NCC 4 NCC Camps: Types and Conduct

National Integration and Awareness

NI 1 National Integration: Importance and Necessity
NI 2 Factors Affecting National Integration
NI 3 Unity in Diversity and Role of NCC in Nation Building
NI 4 Threats to National Security

Personality Development

PD 1 Self-Awareness, Empathy, Critical and Creative Thinking, Decision Making and Problem Solving
PD 2 Communication Skills
PD 3 Group Discussion: Stress and Emotions

Leadership

L 1 Leadership Capsule: Traits, Indicators, Motivation, Moral Values, Honour Code
L 2 Case Studies: Shivaji, Jhasi Ki Rani

Social Service and Community Development

SS 1 Basics, Rural Development Programmes, NGOs, Contribution of Youth
SS 4 Protection of Children and Women Safety
SS 5 Road / Rail Travel Safety
SS 6 New Initiatives
SS 7 Cyber and Mobile Security Awareness

Nx3253 (Air Force Wing)

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

For detailed syllabus of all other subjects of Industrial Engineering, 2021 regulation curriculum do visit Industrial 2nd Sem subject syllabuses for 2021 regulation.

For all Industrial Engineering results, visit Anna University Industrial all semester results direct link.

For Industrial Engineering 2nd Sem scheme and its subjects, do visit Industrial 2nd Sem 2021 regulation scheme. The detailed syllabus of engineering graphics is as follows.

Course Objective:

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Concepts and Conventions (Not for Examination)

Importance of graphics in engineering applications — Use of drafting instruments — BIS conventions and specifications — Size, layout and folding of drawing sheets — Lettering and dimensioning.

Unit I

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Unit II

PROJECTION OF POINTS, LINES AND PLANE SURFACE
Orthographic projection- principles-Principal planes-First angle projection-projection of points. Projection of straight lines (only First angle projections) inclined to both the principal planes -Determination of true lengths and true inclinations by rotating line method and traces. Projection of planes (polygonal and circular surfaces) inclined to both the principal planes by rotating object method.

Unit III

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Unit IV

PROJECTION OF SECTIONED SOLIDS AND DEVELOPMENT OF SURFACES
Sectioning of above solids in simple vertical position when the cutting plane is inclined to the one of the principal planes and perpendicular to the other — obtaining true shape of section. Development of lateral surfaces of simple and sectioned solids — Prisms, pyramids cylinders and cones. Practicing three dimensional modeling of simple objects by CAD Software(Not for examination)

Unit V

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Course Outcome:

On successful completion of this course, the student will be able to

• Use BIS conventions and specifications for engineering drawing.
• Construct the conic curves, involutes and cycloid.
• Solve practical problems involving projection of lines.
• Draw the orthographic, isometric and perspective projections of simple solids.
• Draw the development of simple solids.

Text Books:

1. Bhatt N.D. and Panchal V.M., Engineering Drawing, Charotar Publishing House, 53rd Edition, 2019.
2. Natrajan K.V., A Text Book of Engineering Graphics, Dhanalakshmi Publishers, Chennai, 2018.
3. Parthasarathy, N. S. and Vela Murali, Engineering Drawing, Oxford University Press, 2015

References:

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Publication of Bureau of Indian Standards:

1. IS 10711 — 2001: Technical products Documentation — Size andlay out of drawing sheets.
2. IS 9609 (Parts 0 and 1) — 2001: Technical products Documentation — Lettering.
3. IS 10714 (Part 20) — 2001 and SP 46 — 2003: Lines for technical drawings.
4. IS 11669 — 1986 and SP 46 —2003: Dimensioning of Technical Drawings.
5. IS 15021 (Parts 1 to 4) — 2001: Technical drawings — Projection Methods.

Special Points Applicable To University Examinations On Engineering Graphics:

1. There will be five questions, each of either or type covering all units of the syllabus.
2. All questions will carry equal marks of 20 each making a total of 100.
3. The answer paper shall consist of drawing sheets of A3 size only. The students will be permitted to use appropriate scale to fit solution within A3 size.
4. The examination will be conducted in appropriate sessions on the same day

For detailed syllabus of all other subjects of Industrial Engineering, 2021 regulation curriculum do visit Industrial 2nd Sem subject syllabuses for 2021 regulation.

For all Industrial Engineering results, visit Anna University Industrial all semester results direct link.

For Industrial Engineering 2nd Sem scheme and its subjects, do visit Industrial 2nd Sem 2021 regulation scheme. The detailed syllabus of basic electrical and electronics engineering is as follows.

Course Objective:

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Unit I

ELECTRICAL CIRCUITS
DC Circuits: Circuit Components: Conductor, Resistor, Inductor, Capacitor – Ohm’s Law -Kirchhoff’s Laws -Independent and Dependent Sources – Simple problems- Nodal Analysis, Mesh analysis with Independent sources only (Steady state) Introduction to AC Circuits and Parameters: Waveforms, Average value, RMS Value, Instantaneous power, real power, reactive power and apparent power, power factor – Steady state analysis of RLC circuits (Simple problems only)

Unit II

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Unit III

ANALOG ELECTRONICS
Resistor, Inductor and Capacitor in Electronic Circuits- Semiconductor Materials: Silicon &Germanium – PN Junction Diodes, Zener Diode -Characteristics Applications – Bipolar Junction Transistor-Biasing, JFET, SCR, MOSFET,IGBT – Types, I-V Characteristics and Applications, Rectifier and Inverters

Unit IV

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Unit V

MEASUREMENTS AND INSTRUMENTATION
Functional elements of an instrument, Standards and calibration, Operating Principle , types -Moving Coil and Moving Iron meters, Measurement of three phase power, Energy Meter, Instrument Transformers-CT and PT,DSO- Block diagram- Data acquisition.

Course Outcome:

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Text Books:

1. Kothari DP and I.J Nagrath, Basic Electrical and Electronics Engineering, Second Edition, McGraw Hill Education, 2020
2. S.K.Bhattacharya Basic Electrical and Electronics Engineering, Pearson Education, Second Edition, 2017.
3. Sedha R.S., A textbook book of Applied Electronics, S. Chand and Co., 2008
4. James A .Svoboda, Richard C. Dorf, Dorf’s Introduction to Electric Circuits, Wiley, 2018.
5. A.K. Sawhney, Puneet Sawhney ‘A Course in Electrical and Electronic Measurements and Instrumentation’, Dhanpat Rai and Co, 2015.

References:

1. Kothari DP and I.J Nagrath, Basic Electrical Engineering, Fourth Edition, McGraw Hill Education, 2019.
2. Thomas L. Floyd, ‘Digital Fundamentals’, 11th Edition, Pearson Education, 2017.
3. Albert Malvino, David Bates, ‘Electronic Principles, McGraw Hill Education; 7th edition, 2017.
4. Mahmood Nahvi and Joseph A. Edminister, Electric Circuits, Schaum’ Outline Series, McGraw Hill, 2002.
5. H.S. Kalsi, ‘Electronic Instrumentation’, Tata McGraw-Hill, New Delhi, 2010

For detailed syllabus of all other subjects of Industrial Engineering, 2021 regulation curriculum do visit Industrial 2nd Sem subject syllabuses for 2021 regulation.

For all Industrial Engineering results, visit Anna University Industrial all semester results direct link.

For Industrial Engineering 2nd Sem scheme and its subjects, do visit Industrial 2nd Sem 2021 regulation scheme. The detailed syllabus of professional english – ii is as follows.

Course Objective:

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Unit I

MAKING COMPARISONS
Listening – Evaluative Listening: Advertisements, Product Descriptions, -Audio / video; Listening and filling a Graphic Organiser (Choosing a product or service by comparison) Speaking – Marketing a product, Persuasive Speech Techniques. Reading – Reading advertisements, user manuals, brochures; Writing – Professional emails, Email etiquette – Compare and Contrast Essay; Grammar – Mixed Tenses, Prepositional phrases Vocabulary – Contextual meaning of words

Unit II

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Unit III

PROBLEM SOLVING
Listening – Listening to / Watching movie scenes/ documentaries depicting a technical problem and suggesting solutions. Speaking – Group Discussion(based on case studies), – techniques and Strategies, Reading – Case Studies, excerpts from literary texts, news reports etc., Writing – Letter to the Editor, Checklists, Problem solution essay / Argumentative Essay Grammar — Error correction; If conditional sentences Vocabulary – Compound Words, Sentence Completion.

Unit IV

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Unit V

THE ABILITY TO PUT IDEAS OR INFORMATION COGENTLY
Listening – Listening to TED Talks, Presentations, Formal job interviews, (analysis of the interview performance); Speaking – Participating in a Role play, (interview/telephone interview), virtual interviews, Making presentations with visual aids; Reading – Company profiles, Statement of Purpose, (SOP), an excerpt of interview with professionals; Writing – Job / Internship application – Cover letter and Resume; Grammar -Numerical adjectives, Relative Clauses Vocabulary – Idioms.

Course Outcome:

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Text Books:

1. English for Engineers and Technologists (2020 edition) Orient Blackswan Private Ltd. Department of English, Anna University.
2. English for Science and Technology Cambridge University Press 2021. Authored by Dr. Veena Selvam, Dr. Sujatha Priyadarshini, Dr. Deepa Mary Francis, Dr. KN. Shoba, and Dr. Lourdes Joevani, Department of English, Anna University.

References:

1. Raman. Meenakshi, Sharma. Sangeeta (2019). Professional English. Oxford university press. New Delhi.
2. Improve Your Writing ed. V.N. Arora and Laxmi Chandra, Oxford Univ. Press, 2001, NewDelhi.
3. Learning to Communicate – Dr. V. Chellammal. Allied Publishers, New Delhi, 2003
4. Business Correspondence and Report Writing by Prof. R.C. Sharma and Krishna Mohan, Tata McGraw Hill and Co. Ltd., 2001, New Delhi.
5. Developing Communication Skills by Krishna Mohan, Meera Bannerji- Macmillan India Ltd. 1990, Delhi.

For detailed syllabus of all other subjects of Industrial Engineering, 2021 regulation curriculum do visit Industrial 2nd Sem subject syllabuses for 2021 regulation.

For all Industrial Engineering results, visit Anna University Industrial all semester results direct link.

For Industrial Engineering 2nd Sem scheme and its subjects, do visit Industrial 2nd Sem 2021 regulation scheme. The detailed syllabus of materials science is as follows.

Course Objective:

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Unit I

CRYSTALLOGRAPHY
Crystal structures: BCC, FCC and HCP – directions and planes – linear and planar densities – crystal imperfections- edge and screw dislocations – grain and twin boundaries – Burgers vector and elastic strain energy- Slip systems, plastic deformation of materials – Polymorphism – phase changes -nucleation and growth – homogeneous and heterogeneous nucleation.

Unit II

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Unit III

SEMICONDUCTORS AND TRANSPORT PHYSICS
Intrinsic Semiconductors – Energy band diagram – direct and indirect band gap semiconductors -Carrier concentration in intrinsic semiconductors – extrinsic semiconductors – Carrier concentration in N-type and P-type semiconductors – Variation of carrier concentration with temperature – Carrier transport in Semiconductors: Drift, mobility and diffusion – Hall effect and devices – Ohmic contacts – Schottky diode.

Unit IV

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Unit V

NANOELECTRONIC DEVICES
Quantum confinement – Quantum structures – quantum wells, wires and dots – Zener-Bloch oscillations – Resonant tunneling – quantum interference effects – mesoscopic structures – Single electron phenomena – Single electron Transistor. Semiconductor photonic structures – 1D, 2D and 3D photonic crystal. Active and passive optoelectronic devices – photo processes – spintronics -carbon nanotubes: Properties and applications.

Course Outcome:

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Text Books:

1. V.Raghavan. Materials Science and Engineering: A First Course, Prentice Hall India Learning Private Limited, 2015.
2. S.O. Kasap, Principles of Electronic Materials and Devices, Mc-Graw Hill, 2018.
3. Jasprit Singh, Semiconductor Devices: Basic Principles, Wiley (India), 2007.
4. Jasprit Singh, Semiconductor Optoelectronics: Physics and Technology, Mc-Graw Hill India (2019)
5. G.W.Hanson. Fundamentals of Nanoelectronics. Pearson Education (Indian Edition), 2009.

References:

1. R.Balasubramaniam, Callister’s Materials Science and Engineering. Wiley (Indian Edition), 2014.
2. Wendelin Wright and Donald Askeland, Essentials of Materials Science and Engineering, CL Engineering, 2013.
3. Robert F.Pierret, Semiconductor Device Fundamentals, Pearson, 2006
4. Pallab Bhattacharya, Semiconductor Optoelectronic Devices, Pearson, 2017
5. Ben Rogers, Jesse Adams and Sumita Pennathur, Nanotechnology: Understanding Small Systems, CRC Press, 2017.

For detailed syllabus of all other subjects of Industrial Engineering, 2021 regulation curriculum do visit Industrial 2nd Sem subject syllabuses for 2021 regulation.

For all Industrial Engineering results, visit Anna University Industrial all semester results direct link.

For Industrial Engineering 2nd Sem scheme and its subjects, do visit Industrial 2nd Sem 2021 regulation scheme. The detailed syllabus of statistics and numerical methods is as follows.

Course Objective:

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Unit I

TESTING OF HYPOTHESIS
Sampling distributions – Tests for single mean, proportion and difference of means (Large and small samples) – Tests for single variance and equality of variances – Chi square test for goodness of fit – Independence of attributes.

Unit II

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Unit III

SOLUTION OF EQUATIONS AND EIGENVALUE PROBLEMS
Solution of algebraic and transcendental equations – Fixed point iteration method – Newton Raphson method- Solution of linear system of equations – Gauss elimination method – Pivoting -Gauss Jordan method – Iterative methods of Gauss Jacobi and Gauss Seidel – Eigenvalues of a matrix by Power method and Jacobi’s method for symmetric matrices.

Unit IV

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Unit V

NUMERICAL SOLUTION OF ORDINARY DIFFERENTIAL EQUATIONS
Single step methods: Taylor’s series method – Euler’s method – Modified Euler’s method – Fourth order Runge-Kutta method for solving first order differential equations – Multi step methods: Milne’s and Adams – Bash forth predictor corrector methods for solving first order differential equations.

Course Outcome:

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

Text Books:

1. Grewal, B.S., and Grewal, J.S., Numerical Methods in Engineering and Science, Khanna Publishers, 10th Edition, New Delhi, 2015.
2. Johnson, R.A., Miller, I and Freund J., Miller and Freund’s Probability and Statistics for Engineers, Pearson Education, Asia, 8th Edition, 2015.

References:

1. Burden, R.L and Faires, J.D, Numerical Analysis, 9th Edition, Cengage Learning, 2016.
2. Devore. J.L., Probability and Statistics for Engineering and the Sciences, Cengage Learning, New Delhi, 8th Edition, 2014.
3. Gerald. C.F. and Wheatley. P.O. Applied Numerical Analysis Pearson Education, Asia, New Delhi, 7th Edition, 2007.
4. Gupta S.C. and Kapoor V. K., Fundamentals of Mathematical Statistics, Sultan Chand and Sons, New Delhi, 12th Edition, 2020.
5. Spiegel. M.R., Schiller. J. and Srinivasan. R.A., Schaum’s Outlines on Probability and Statistics , Tata McGraw Hill Edition, 4th Edition, 2012.
6. Walpole. R.E., Myers. R.H., Myers. S.L. and Ye. K., Probability and Statistics for Engineers and Scientists, 9th Edition, Pearson Education, Asia, 2010.

For detailed syllabus of all other subjects of Industrial Engineering, 2021 regulation curriculum do visit Industrial 2nd Sem subject syllabuses for 2021 regulation.

For all Industrial Engineering results, visit Anna University Industrial all semester results direct link.

For detailed syllabus of all other subjects of Industrial Engineering 1st Sem, 2021 curriculum do visit Industrial 1st Sem subject syllabuses for 2021 regulation.

For the complete syllabus, results, class timetable, and many other features kindly download the iStudy App
It is a lightweight, easy to use, no images, and no pdfs platform to make students’s lives easier.
.

In case of questions, don’t feel shy to leave a comment or leave feedback in the iStudy app for faster response.

For the results of Industrial Engineering 1st Sem, kindly visit Industrial 1st Sem direct results link.

For updated syllabus of Industrial Engineering (Industrial) 2021, kindly visit Industrial updated syllabus.

For exam time table of Industrial Engineering (Industrial), kindly visit Anna University exam timetables.

For Industrial Engineering (Industrial) notices, kindly visit Anna University notices.

Wishing you great luck ahead.